Kh. A. Baluyan
Research Subjects
Research Interests
Kh. A. Baluyan has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- D. Yu. Sotchenko
Scientific Research Institute for the Baking Industry
2 shared publications - Vladimir V. Martirosyan
Scientific Research Institute for the Baking Industry
2 shared publications - Yu. Yu. Pechnikova
FSASI Scientific Research Institute for the Baking Industry
2 shared publications - A. Y. Ignatov
Scientific Research Institute for the Baking Industry
1 shared publication - Anton Yurievich Sharikov
All-Russian Research Institute of Food Biotechnology – branch of the Federal Research Centre of Nutrition, Biotechnology and Food Safety
1 shared publication - D. O. Smetanin
Scientific Research Institute for the Baking Industry; Russian Biotechnological University (ROSBIOTECH)
1 shared publication
Latest Publications
- Open Access
- 1 August 2026
- Published by The Gorbatov's All-Russian Meat Research Institute in Food systems
- Vol. 9 (2) , 162-170
Study of technological properties of cereals from grain of corn hybrids of domestic breeding for extrusion processing
This paper presents the results of a study of groats from domestically bred corn hybrids (Belozerniy 250, Belozerniy 300, K 350, Yantarniy, K 500 and Mashuk 510): color characteristics, particle size distribution, bulk density, gelatinization temperature and starch suspension viscosity. An increased bulk density of particles from the grain of corn hybrid K 500 was found, indicating a monolithic endosperm structure. Increased viscosity of starch suspensions from the grain of corn hybrids K 350, K 500 and Mashuk 510 was noted – 7012 cP, 5930 cP and 4871 cP, respectively. This indicates the possible prevalence of amylopectin molecules in the starch, which can ensure the uniformity of the microstructure of extruded products. The criteria for evaluating the extrusion process were specific mechanical energy during processing and extrudate expansion coefficient. The production of groats in a twin–screw extruder with particle sizes of 250–670 μm from the grain of corn hybrid K 500 occurred at a lower torque (52 ± 1 %) and a pressure at screw chamber of 4.9 ± 0.2 MPa, resulting in lower specific energy (0.174 ± 0.003 kW · h/kg) compared to the processing of other samples of corn groats. The maximum expansion coefficient (12.0 ± 0.2) was established for the extrudate from this cereal. The study demonstrated the feasibility of using groats from the grains of corn hybrids K 350, K 500 and Mashuk 510, which are characterized by a monolithic endosperm structure and better thermodynamic properties of starch under thermal exposure. High expansion coefficients of extrudates of all studied fractions of cereals from the grain of the corn hybrid K 500 were established, which indicates the feasibility of using its processed products for extrusion processing.
- 1 August 2026
- Published by The Gorbatov's All-Russian Meat Research Institute in Food systems
- Vol. 9 (2) , 162-170
Open AccessStudy of technological properties of cereals from grain of corn hybrids of domestic breeding for extrusion processing
This paper presents the results of a study of groats from domestically bred corn hybrids (Belozerniy 250, Belozerniy 300, K 350, Yantarniy, K 500 and Mashuk 510): color characteristics, particle size distribution, bulk density, gelatinization temperature and starch suspension viscosity. An increased bulk density of particles from the grain of corn hybrid K 500 was found, indicating a monolithic endosperm structure. Increased viscosity of starch suspensions from the grain of corn hybrids K 350, K 500 and Mashuk 510 was noted – 7012 cP, 5930 cP and 4871 cP, respectively. This indicates the possible prevalence of amylopectin molecules in the starch, which can ensure the uniformity of the microstructure of extruded products. The criteria for evaluating the extrusion process were specific mechanical energy during processing and extrudate expansion coefficient. The production of groats in a twin–screw extruder with particle sizes of 250–670 μm from the grain of corn hybrid K 500 occurred at a lower torque (52 ± 1 %) and a pressure at screw chamber of 4.9 ± 0.2 MPa, resulting in lower specific energy (0.174 ± 0.003 kW · h/kg) compared to the processing of other samples of corn groats. The maximum expansion coefficient (12.0 ± 0.2) was established for the extrudate from this cereal. The study demonstrated the feasibility of using groats from the grains of corn hybrids K 350, K 500 and Mashuk 510, which are characterized by a monolithic endosperm structure and better thermodynamic properties of starch under thermal exposure. High expansion coefficients of extrudates of all studied fractions of cereals from the grain of the corn hybrid K 500 were established, which indicates the feasibility of using its processed products for extrusion processing.
- Open Access
- 1 April 2026
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 88 (1) , 133-141
Study of color characteristics of bakery products made from wheat flour at different baking times
According to regulatory documents, the color of bakery products is determined by organoleptic analysis, an essential fault of which is the assessment subjectivity. Instrumental analysis is widely used currently in world practice to evaluate the color characteristics of various food products, including bakery products. The most widely used colorimetric system is the CIE Lab. The aim of the study was to determine the effect of baking time in an electrical sole oven on the color characteristics of bakery products made from patent wheat flour. The objects of the study were products prepared according to the recipe for long loaf with different baking times (15-40 min). Samples of bakery products were examined by organoleptic analysis (taste, crust color, crumb color, bread aroma, crumb aroma, crumb condition). The analysis of the color characteristics of the crust and crumb was performed using a colorimeter Chroma meter CR-410 (Konica Minolta, Japan) in the CIE Lab system. The studies have shown that with increasing baking time, the lightness (L*) decreases from 72.60±1.75% to 48.75±1.43%; the parameter b* decreases significantly starting from 35 minutes of baking from 23.43±0.28° to 15.42±1.30°; while the parameter a* initially increases from 6.40±1.12° to a peak value of 10.57±0.43° by 30 minutes of baking, and then decreases. Comparison of the results of the color characteristics of the bakery product with the results of the organoleptic analysis made it possible to establish the ranges of color characteristics L* (55-68%) and a* (9-11°), at which the color of the bread crust and the product as a whole is positively assessed by tasters. The b* parameter did not have an unambiguous correlation with the results of the organoleptic analysis. Using the international CIE Lab system for measuring bakery product color characteristics, it has been proven that the most informative values for assessing the crust color of wheat flour products are the characteristics “L*” and “a*”, which correlate with the organoleptic assessment of these products. These characteristics can be used as visual indicators in the automatic baking time control process.
- 1 April 2026
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 88 (1) , 133-141
Open AccessStudy of color characteristics of bakery products made from wheat flour at different baking times
According to regulatory documents, the color of bakery products is determined by organoleptic analysis, an essential fault of which is the assessment subjectivity. Instrumental analysis is widely used currently in world practice to evaluate the color characteristics of various food products, including bakery products. The most widely used colorimetric system is the CIE Lab. The aim of the study was to determine the effect of baking time in an electrical sole oven on the color characteristics of bakery products made from patent wheat flour. The objects of the study were products prepared according to the recipe for long loaf with different baking times (15-40 min). Samples of bakery products were examined by organoleptic analysis (taste, crust color, crumb color, bread aroma, crumb aroma, crumb condition). The analysis of the color characteristics of the crust and crumb was performed using a colorimeter Chroma meter CR-410 (Konica Minolta, Japan) in the CIE Lab system. The studies have shown that with increasing baking time, the lightness (L*) decreases from 72.60±1.75% to 48.75±1.43%; the parameter b* decreases significantly starting from 35 minutes of baking from 23.43±0.28° to 15.42±1.30°; while the parameter a* initially increases from 6.40±1.12° to a peak value of 10.57±0.43° by 30 minutes of baking, and then decreases. Comparison of the results of the color characteristics of the bakery product with the results of the organoleptic analysis made it possible to establish the ranges of color characteristics L* (55-68%) and a* (9-11°), at which the color of the bread crust and the product as a whole is positively assessed by tasters. The b* parameter did not have an unambiguous correlation with the results of the organoleptic analysis. Using the international CIE Lab system for measuring bakery product color characteristics, it has been proven that the most informative values for assessing the crust color of wheat flour products are the characteristics “L*” and “a*”, which correlate with the organoleptic assessment of these products. These characteristics can be used as visual indicators in the automatic baking time control process.
- Open Access
- 19 October 2024
- Published by The Gorbatov's All-Russian Meat Research Institute in Food systems
- Vol. 7 (3) , 345-354
Technological aspects of managing the structural and mechanical properties of wheat bread crumb
This work is dedicated to the study of the structural-mechanical properties of wheat bread crumb 12 hours after baking and then every 24 hours during 108 hours of storage. The basis of this investigation was the study of the starch retrogradation process, which is a transfer of the amorphous structure of starch grains into the crystalline state, which predetermines an increase in the values of the hardness parameters and hardness index. The aim of the work was investigation of an effect of the state of carbohydrate-amylase and protein-proteinase complex of wheat flour by introduction of wheat malt and dry gluten on the structural-mechanical properties of crumb of bakery products and their staling rate during storage. In this study, the authors used baker’s wheat flour of the highest grade, wheat malt, dry gluten, bread from baker’s wheat flour of the highest grade that was made using the straight dough method by the experimental laboratory baking. The authors established an effect of dosing wheat malt and dry wheat gluten on changes in the water absorption of wheat dough in the process of mixing, on its rheological properties, on the structural-mechanical properties of crumb of wheat bread made by the experimental laboratory baking as well as on the rate of its staling during storage. The optimal dosage of wheat malt was 5%, which ensured the falling number equal to 235 s. The dose of dry gluten of 3% ensured the total gluten content in dough of 31.3%, dough moisture of 43.1% and dough consistency equal to 640 FU. Simultaneous introduction of wheat malt and dry wheat gluten ensured a decrease in the hardness index of wheat bread crumb by 55% and the rate of its staling by 3.3 times.
- 19 October 2024
- Published by The Gorbatov's All-Russian Meat Research Institute in Food systems
- Vol. 7 (3) , 345-354
Open AccessTechnological aspects of managing the structural and mechanical properties of wheat bread crumb
This work is dedicated to the study of the structural-mechanical properties of wheat bread crumb 12 hours after baking and then every 24 hours during 108 hours of storage. The basis of this investigation was the study of the starch retrogradation process, which is a transfer of the amorphous structure of starch grains into the crystalline state, which predetermines an increase in the values of the hardness parameters and hardness index. The aim of the work was investigation of an effect of the state of carbohydrate-amylase and protein-proteinase complex of wheat flour by introduction of wheat malt and dry gluten on the structural-mechanical properties of crumb of bakery products and their staling rate during storage. In this study, the authors used baker’s wheat flour of the highest grade, wheat malt, dry gluten, bread from baker’s wheat flour of the highest grade that was made using the straight dough method by the experimental laboratory baking. The authors established an effect of dosing wheat malt and dry wheat gluten on changes in the water absorption of wheat dough in the process of mixing, on its rheological properties, on the structural-mechanical properties of crumb of wheat bread made by the experimental laboratory baking as well as on the rate of its staling during storage. The optimal dosage of wheat malt was 5%, which ensured the falling number equal to 235 s. The dose of dry gluten of 3% ensured the total gluten content in dough of 31.3%, dough moisture of 43.1% and dough consistency equal to 640 FU. Simultaneous introduction of wheat malt and dry wheat gluten ensured a decrease in the hardness index of wheat bread crumb by 55% and the rate of its staling by 3.3 times.
- Open Access
- 1 January 2022
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2478 (1) , 030002
Equations of the rheological state of food media with plastic properties
The article studies the shear flow of wheat and millet shortbread, cracker and hardtack doughs with plastic properties. We studied samples of wheat and millet shortbread, cracker, and hardtack dough prepared according to new recipes that contained mixtures of fine vegetable powders. The experiments on the study of these objects were carried out using the fundamental methods of rotational and capillary viscometry. Experimental flow curves of the objects under study and calculated viscosity dependences on the shear rate of the studied dough samples in both normal and logarithmic coordinates were constructed according to the results of the studies. A peculiarity of the flow of the studied objects is the change in the nature of the logarithmic flow curves depending on the ratio of elastic and plastic properties, which depends on the value of the shear rate. The proposed rheological equations of state of the objects under study can also be used for other materials with plastic properties.
- 1 January 2022
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2478 (1) , 030002
Open AccessEquations of the rheological state of food media with plastic properties
The article studies the shear flow of wheat and millet shortbread, cracker and hardtack doughs with plastic properties. We studied samples of wheat and millet shortbread, cracker, and hardtack dough prepared according to new recipes that contained mixtures of fine vegetable powders. The experiments on the study of these objects were carried out using the fundamental methods of rotational and capillary viscometry. Experimental flow curves of the objects under study and calculated viscosity dependences on the shear rate of the studied dough samples in both normal and logarithmic coordinates were constructed according to the results of the studies. A peculiarity of the flow of the studied objects is the change in the nature of the logarithmic flow curves depending on the ratio of elastic and plastic properties, which depends on the value of the shear rate. The proposed rheological equations of state of the objects under study can also be used for other materials with plastic properties.