Simone Bulleri
Research Subjects
Research Interests
Simone Bulleri has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Adolfo Senatore
Department of Industrial Engineering University of Naples Federico II Via Claudio 21 80125 Naples Italy
2 shared publications - Emma Frosina
Department of Engineering, University of Sannio, Benevento, Italy
2 shared publications - Pietro Mazzei
Department of Industrial Engineering University of Naples Federico II Via Claudio 21 80125 Naples Italy
2 shared publications
Latest Publications
- Open Access
- 1 January 2024
- Published by River Publishers
- p. 1-19
Numerical Modeling of Helical External Gear Pump Through a Novel CFD Approach Using Simerics MP+
External Gear Pumps (EGPs) are positive displacement machines with excellent performances and very competitive costs. A particular typology of EGPs is Helical Gear Pump, where the teeth present an inclination along the axial direction, permitting a progressive meshing with consequent lower vibration and noise emission. Three-dimensional CFD numerical analysis of these pumps has proven to be quite complex. More recently some analyses have been proposed however, to obtain realistic results, approximations regarding the helical angle along the axial dimension have been applied. Those models consisted of a high number of grid cells, leading to high computational time request. In this article, it is explored the use of a novel CFD approach through the use of the commercial code Simerics MP+, already used with success by the research group. This new method permits to evaluate the geometry of the pump without any geometrical approximation, leading to more accurate results and less computational time required if compared with other 3D-CFD tools. An accurate numerical model has been built up on a reference pump with helical gears; the model has been then compared with the results of an experimental campaign. Finally, a new design of the pressure relief grooves inside the wear plates has been investigated and simulated with the objective of reducing the fluid-borne noise emission, as well as to improve the volumetric efficiency of the pump and to reduce the flow ripple fluctuation, pressure spikes and crossflow optimization.
- 1 January 2024
- Published by River Publishers
- p. 1-19
Open AccessNumerical Modeling of Helical External Gear Pump Through a Novel CFD Approach Using Simerics MP+
External Gear Pumps (EGPs) are positive displacement machines with excellent performances and very competitive costs. A particular typology of EGPs is Helical Gear Pump, where the teeth present an inclination along the axial direction, permitting a progressive meshing with consequent lower vibration and noise emission. Three-dimensional CFD numerical analysis of these pumps has proven to be quite complex. More recently some analyses have been proposed however, to obtain realistic results, approximations regarding the helical angle along the axial dimension have been applied. Those models consisted of a high number of grid cells, leading to high computational time request. In this article, it is explored the use of a novel CFD approach through the use of the commercial code Simerics MP+, already used with success by the research group. This new method permits to evaluate the geometry of the pump without any geometrical approximation, leading to more accurate results and less computational time required if compared with other 3D-CFD tools. An accurate numerical model has been built up on a reference pump with helical gears; the model has been then compared with the results of an experimental campaign. Finally, a new design of the pressure relief grooves inside the wear plates has been investigated and simulated with the objective of reducing the fluid-borne noise emission, as well as to improve the volumetric efficiency of the pump and to reduce the flow ripple fluctuation, pressure spikes and crossflow optimization.
- Open Access
- 1 January 2024
- Published by River Publishers
- p. 1-16
Numerical Modeling of Helical External Gear Pump Through a Lumped Parameter Approach
External gear pumps are a type of positive displacement machines that combine excellent performances with very competitive costs. These characteristics unfold the necessity of tools to accurately simulate their performance. In this article, a numerical methodology based on a lumped parameter approach has been developed for helical External Gear Pumps (EGPs). The methodology is based on the usage of a tool, that, starting from the pump drawing, thanks to different subroutines developed in different interconnected environments, allows to fully analyze EGPs with Helical. The tool is based on a tool called EgeMATor developed by the research group for spur gears and described in a precedent works [1]. The tool has been further expanded in its functionality and optimized becoming EgeMATor MP+. Indeed, the new release has been expanded not only to include helical gears but also to simulate the bearings' reaction and consequently the gears' eccentricity variations. Results obtained from the simulations have been compared with data obtained thanks to an experimental campaign carried on a series of reference pumps done to further validate the numerical model and the new implemented functionalities. Then, a new methodology that, for a defined tooth gears profile, is able to automatically obtain an optimized design of the pressure relief grooves of the wear plate has been studied. This methodology, through a flow ripple fluctuation, pressure spikes and crossflow optimization based on geometric assumptions, has the objective to characterize a design that permits to improve the volumetric efficiency as well as to reduce the fluid-borne noise emission of the pump analyzed.
- 1 January 2024
- Published by River Publishers
- p. 1-16
Open AccessNumerical Modeling of Helical External Gear Pump Through a Lumped Parameter Approach
External gear pumps are a type of positive displacement machines that combine excellent performances with very competitive costs. These characteristics unfold the necessity of tools to accurately simulate their performance. In this article, a numerical methodology based on a lumped parameter approach has been developed for helical External Gear Pumps (EGPs). The methodology is based on the usage of a tool, that, starting from the pump drawing, thanks to different subroutines developed in different interconnected environments, allows to fully analyze EGPs with Helical. The tool is based on a tool called EgeMATor developed by the research group for spur gears and described in a precedent works [1]. The tool has been further expanded in its functionality and optimized becoming EgeMATor MP+. Indeed, the new release has been expanded not only to include helical gears but also to simulate the bearings' reaction and consequently the gears' eccentricity variations. Results obtained from the simulations have been compared with data obtained thanks to an experimental campaign carried on a series of reference pumps done to further validate the numerical model and the new implemented functionalities. Then, a new methodology that, for a defined tooth gears profile, is able to automatically obtain an optimized design of the pressure relief grooves of the wear plate has been studied. This methodology, through a flow ripple fluctuation, pressure spikes and crossflow optimization based on geometric assumptions, has the objective to characterize a design that permits to improve the volumetric efficiency as well as to reduce the fluid-borne noise emission of the pump analyzed.