Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Botong Li has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Thermal stability and phase transformation of conductive α-(AlxGa1−x)2O3/Ga2O3 heterostructure on sapphire substrates

    by Botong Li, Shisong Luo, Jaeheon Jung, Bobby G. Duersch, Qinyuan Jiang, Cheng Chang, Lucas Lau, Zonghao Zhang, Jianhua Li, Hunter Ellis, et al.

    Thermal stability and phase transformation of conductive α-(Al0.16Ga0.84)2O3/Ga2O3 heterostructure on sapphire substrates were investigated via in situ high temperature x-ray diffraction, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The conductive α-(Al0.16Ga0.84)2O3/Ga2O3 heterostructure with fluorine (F) doping was grown by mist-chemical vapor deposition on sapphire substrates, achieving a Hall mobility of 28 cm2/(V s). The heterostructure exhibited thermal stability up to ∼550–575 °C before transforming to β-(AlxGa1−x)2O3/Ga2O3. The transformed β-Ga2O3 is mainly polycrystalline rather than a high-quality epitaxial phase. Reciprocal space mapping results reveal that the edge dislocation density remains consistently higher than the screw dislocation density throughout the heating process, indicating that the crystalline imperfection in α-Ga2O3 is dominated by in-plane mosaicity. After the phase transformation from the α phase to the β phase, catastrophic damage to the film and upheaval of the surface were observed by SEM and AFM.


  • In situ XRD study of strain evolution in AlGaN/GaN HEMT at high temperatures up to 1000 °C

    by Botong Li, Bobby G. Duersch, Hunter Ellis, Imteaz Rahaman, Aidan Belanger, Zlatan Aksamija, Brian Roy Van Devener, Kathy Anderson, Kai Fu

    The thermal stability and structural evolution of a GaN high-electron mobility transistor (HEMT) heterostructure grown on a Si (111) substrate were investigated using in situ high-temperature x-ray diffraction, reciprocal space mapping (RSM), Raman spectroscopy, and rocking-curve (RC) analysis at varying temperatures. The heterostructure, consisting of a p-GaN cap, an AlGaN barrier, and a GaN channel supported by two AlGaN/AlGaN superlattice buffer layers, maintained clear and periodic satellite peaks up to a temperature of 1000 °C, confirming structural integrity. Symmetric and asymmetric RSM results reveal that both the Si and GaN diffraction peaks shift with increasing temperature, consistent with thermal expansion, and show no significant broadening or relaxation throughout the heating process. The c-lattice constant follows the theoretical expansion predicted by the multi-frequency Einstein model, whereas the a-lattice expansion is slower due to in-plane strain constraints imposed by the underlying Si substrate and buffer layers. Irreversible strain relaxation and thermal mismatch-induced stress redistribution induce a residual compressive strain of roughly 0.3% in the GaN channel after cooling, which has been further confirmed in Raman spectra through a blue shift (∼1 cm−1) of the GaN E2 (high) phonon mode, corresponding to an in-plane strain of −0.15% ± 0.16%. RC analysis revealed an increase in both screw and edge dislocation densities of 28% and 12%, respectively. These results collectively demonstrate that the GaN HEMT heterostructure exhibits robust crystalline stability up to 1000 °C without cracking due to strain relaxation, with only minor strain redistribution and limited dislocation activity, providing experimental evidence for GaN devices' applications under high-temperature conditions.

  • β -Ga 2 O 3 -Based Radiation Detector for Proton Therapy

    by Hunter Ellis, Imteaz Rahaman, Apostoli Hillas, Botong Li, Vikren Sarkar, Kai Fu

    Intensity-modulated proton therapy (IMPT) is an advanced cancer treatment modality that offers advantages over conventional X-ray therapies, particularly in its ability to minimize radiation dose beyond the tumor target. This reduction in unnecessary irradiation exposure lowers the risk to surrounding healthy tissue and reduces side effects compared to conventional X-ray treatments. However, due to the high complexity of intensity-modulated proton therapy plans, each plan must be independently validated to ensure the safety of the radiation exposure to the patient. While ion chambers are currently used for this purpose, their limitations—particularly in angled beam measurements and multi-depth assessments—hinder their effectiveness. Silicon-based detectors, commonly used in X-ray therapy, are unsuitable for IMPT due to their rapid degradation under proton irradiation. In this study, a β-Ga2O3-based metal–semiconductor–metal detector was compared with a commercial ion chamber using a MEVION S250i proton accelerator. The β-Ga2O3 detector demonstrated reliable detection of single-pulse proton doses as low as 0.26 MU and exhibited a linear charge-to-dose relationship across a wide range of irradiation conditions. Furthermore, its measurement variability was comparable to that of the ion chamber. These results highlight the strong potential of β-Ga2O3 as a detector material for dose verification in IMPT.

  • Open Access

    In situ XRD Study of Strain Evolution in AlGaN/GaN HEMT at High Temperatures up to 1000 °C

    by Botong Li, Bobby G. Duersch, Hunter Ellis, Imteaz Rahaman, Aidan Belanger, Zlatan Aksamija, Brian Roy Van Devener, Kathy Anderson, Kai Fu

    The thermal stability and structural evolution of a GaN high-electron-mobility transistor (HEMT) heterostructure grown on a Si (111) substrate were investigated using in situ high-temperature X-ray diffraction (HT-XRD), reciprocal space mapping (RSM), Raman spectroscopy, and rocking-curve (RC) analysis at varying temperatures. The heterostructure, consisting of a p-GaN cap, an AlGaN barrier, and a GaN channel supported by two AlGaN/AlGaN superlattice (SL) buffer layers, maintained clear and periodic satellite peaks up to a temperature of 1000 deg C, confirming excellent structural integrity. Symmetric and asymmetric RSM results reveal that both the Si and GaN diffraction peaks shift to lower angles with increasing temperature, consistent with thermal expansion, and show no significant broadening or relaxation throughout the heating process. The c-lattice constant follows the theoretical expansion predicted by the multi-frequency Einstein model, whereas the a-lattice expansion is slower due to in-plane strain constraints imposed by the underlying Si substrate and buffer layers. Rapid lattice contraction during the fast-cooling stage induces a residual compressive strain of approximately 0.3 percent in the GaN channel after cooling. Raman spectra further confirm this strain state through a blue shift of approximately 1.5 cm-1 of the GaN E2 (high) phonon mode, corresponding to an in-plane strain of about 0.2 percent. Rocking-curve analysis reveals an increase in both screw and edge dislocation densities by 28 percent and 12 percent, respectively. These results collectively demonstrate that the GaN HEMT heterostructure exhibits robust crystalline stability up to 1000 deg C, with only minor strain redistribution and limited dislocation activity, providing experimental evidence for GaN device applications under high-temperature conditions.

  • Phase Evolution and Substrate‐Dependent Nucleation of Quartz GeO 2 Films Grown by Metal‐Organic Chemical Vapor Deposition on r‐ and c‐Plane Sapphires

    by Botong Li, Imteaz Rahaman, Hunter Ellis, Bobby G. Duersch, Kathy Anderson, Kai Fu

    Ultrawide‐bandgap (UWBG) semiconductors, such as GeO 2 , are gaining significant attention for their potential in high‐performance applications, particularly in piezoelectric devices. Despite extensive research, a comprehensive understanding of the growth dynamics and phase evolution of GeO 2 films via metal‐organic chemical vapor deposition (MOCVD) remains insufficient. This study investigates the growth behavior and morphological evolution of GeO 2 thin films on r‐plane and c‐plane sapphire substrates for the MOCVD growth process. The temporal evolution of crystallization and the amorphous‐to‐quartz phase transition are systematically elucidated for the first time. As growth time increases, the spherulitic quartz patterns expand in size, and elevated growth temperatures enhance the crystallization rate. Distinct morphological symmetries emerge depending on the substrate orientation: quadrangular patterns on r‐plane sapphire and hexagonal patterns on c‐plane sapphire. Atomic force microscopy reveals that these spherulitic domains exhibit pyramid‐like surface topography, consistent with volumetric contraction during the amorphous‐to‐quartz phase transition. These findings offer new insights into the phase evolution and substrate‐dependent crystallization behavior of GeO 2 films grown by MOCVD.


  • Degradation of 2.4-kV Ga₂O₃ Schottky Barrier Diode at High Temperatures Up to 500°C

    by Hunter Ellis, Wei Jia, Imteaz Rahaman, Apostoli Hillas, Botong Li, Michael A. Scarpulla, Berardi Sensale Rodriguez, Kai Fu

    Ga2O3 Schottky barrier diodes (SBDs) featuring a field plate (FP) and a composite SiO2/SiNx dielectric layer beneath the FP were fabricated, achieving a breakdown voltage (BV) of 2.4 kV at room temperature (RT). Electrical performance and degradation were analyzed via I–V and C–V measurements from 25 °C to 500 °C, revealing temperature-dependent transport, interface stability, and device stability. Upon returning to RT, the diodes exhibited nearly unchanged forward characteristics, while the BV declined significantly from 2.4 kV to 700 V. This behavior indicates a temperature-induced reduction in the barrier height. The detailed analysis revealed that variable range hopping (VRH) dominated the leakage mechanism at moderate temperatures, while thermal emission (TE) became increasingly significant at temperatures exceeding 400 °C.


  • Open Access

    Phase Evolution and Substrate-Dependent Nucleation of Quartz GeO$_2$ Films Grown by MOCVD on r- and c-Plane Sapphires

    by Botong Li, Imteaz Rahaman, Hunter Ellis, Bobby G. Duersch, Kathy Anderson, Kai Fu

    Ultrawide-bandgap (UWBG) semiconductors, such as GeO$_2$, are gaining significant attention for their potential in high-performance applications, particularly in piezoelectric devices. Despite extensive research, a comprehensive understanding of the growth dynamics and phase evolution of GeO$_2$ films via metal-organic chemical vapor deposition (MOCVD) remains insufficient. In this study, we investigate the growth behavior and morphological evolution of GeO$_2$ thin films on r-plane and c-plane sapphire substrates for the MOCVD growth process. The temporal evolution of crystallization and the amorphous-to-quartz phase transition are systematically elucidated for the first time. As growth time increases, the spherulitic quartz patterns expand in size, and elevated growth temperatures are found to enhance the crystallization rate. Distinct morphological symmetries emerge depending on the substrate orientation: quadrangular patterns on r-plane sapphire and hexagonal patterns on c-plane sapphire. Atomic force microscopy reveals that these spherulitic domains exhibit pyramid-like surface topography, consistent with volumetric contraction during the amorphous-to-quartz phase transition. These findings offer new insights into the phase evolution and substrate-dependent crystallization behavior of GeO$_2$ films grown by MOCVD.

  • Open Access

    Plasma Treatment Technologies for GaN Electronics

    by Botong Li, Imteaz Rahaman, Hunter D. Ellis, Houqiang Fu, Yuji Zhao, Yong Cai, Baoshun Zhang, Kai Fu

    Nowadays, the third-generation semiconductor led by GaN has brought great changes to the semiconductor industry. Utilizing its characteristics of a wide bandgap, high breakdown Electric field, and high electron mobility, GaN material is widely applied in areas such as 5G communication and electric vehicles to improve energy conservation and reduce emissions. However, with the progress in the development of GaN electronics, surface and interface defects have become a main problem that limits the further promotion of their performance and stability, increasing leakage current and causing degradation in breakdown voltage. Thus, to reduce the damage, Plasma treatment technologies are introduced in the fabrication process of GaN electronics. Up to now, designs like the high-resistivity p-GaN cap Layer, passivating termination, and surface recovery process have been established via Plasma treatment, reaching the goals of normally-off transistors, diodes with high breakdown voltage and high-reliability GaN electronics, etc. In this article, hydrogen, fluorine, oxygen, and nitrogen Plasma treatment technologies will be discussed, and their application in GaN electronics will be reviewed and compared.