Zhang Luo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zhang Luo has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Mingche Lai
National University of Defense Technology
8 shared publications - Fangxu Lv
National University of Defense Technology
3 shared publications - Jiaqing Xu
National University of Defense Technology
3 shared publications - Qiang Wang
National University of Defense Technology
3 shared publications - Weifeng He
Shanghai Jiao Tong University
3 shared publications Fangxu Lv
College of Computer Science and Technology, National University of Defense Technology, Changsha, China
2 shared publications
Latest Publications
- 1 December 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (24) , 2073-2076
A 40-Gb/s Burst-Mode CDR With a Dynamic Gain Tuning Algorithm for Optical-Switched DCNs
- 1 December 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (24) , 2073-2076
A 40-Gb/s Burst-Mode CDR With a Dynamic Gain Tuning Algorithm for Optical-Switched DCNs
- 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (11) , 4423-4429
Study on Transmission Structure and Performance of Optical Devices With Three Communication Rates in Common Mode
The traditional 10G/G combo passive optical network (PON) is no longer able to meet the growing traffic demand of the access network, and 50G PON communication has become one of the reliable solutions. In this paper, we study the optical path of a compact wavelength division multiplexing (WDM) optoelectronic device for 50G/10G/G combo PON, which solves the smooth evolution challenge of the coexistence of three rates in an existing network. Firstly, a 50G combo PON beam transmission model with high optical coupling efficiency is established and simulated for optimization. Secondly, the optical coupling law of each laser diode (LD) of the 50G combo PON is studied and analyzed to provide the basis for process guidance for subsequent device packaging. Finally, the performance of the packaged devices is tested and analyzed to study the high-fidelity performance of signal transmission. Experimental results show that the 50G combo PON has a maximum coupling efficiency of 36.7% at total power, a 5% power loss coupling tolerance of ±1.5 μm, and the ability to realize complete signal transmission at three transmit wavelengths 1342 nm, 1490 nm, and 1577 nm through power equalization.
- 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (11) , 4423-4429
Study on Transmission Structure and Performance of Optical Devices With Three Communication Rates in Common Mode
The traditional 10G/G combo passive optical network (PON) is no longer able to meet the growing traffic demand of the access network, and 50G PON communication has become one of the reliable solutions. In this paper, we study the optical path of a compact wavelength division multiplexing (WDM) optoelectronic device for 50G/10G/G combo PON, which solves the smooth evolution challenge of the coexistence of three rates in an existing network. Firstly, a 50G combo PON beam transmission model with high optical coupling efficiency is established and simulated for optimization. Secondly, the optical coupling law of each laser diode (LD) of the 50G combo PON is studied and analyzed to provide the basis for process guidance for subsequent device packaging. Finally, the performance of the packaged devices is tested and analyzed to study the high-fidelity performance of signal transmission. Experimental results show that the 50G combo PON has a maximum coupling efficiency of 36.7% at total power, a 5% power loss coupling tolerance of ±1.5 μm, and the ability to realize complete signal transmission at three transmit wavelengths 1342 nm, 1490 nm, and 1577 nm through power equalization.
- 22 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (4) , 1042-1052
A Novel High-Speed Adaptive Duobinary Digital Detector Based on the Feed-Forward Equalizer and the Maximum Likelihood Sequence Detector for Wireline Transceivers
To solve the high bit error rate (BER) problem of conventional 56-Gb/s nonreturn-to-zero (NRZ) transceivers under high-insertion loss (IL) channels, this study proposes a high-speed adaptive duobinary (DB) digital detector based on the feed-forward equalizer (FFE) and the maximum likelihood sequence detector (MLSD). In this detector, adaptive FFE is combined with channel characteristics to generate DB signals and complete equalization, thus extending the transmission bandwidth and eye height and allowing a larger sampling phase offset. The parallel MLSD is used to complete the detection and decoding of DB signals to reduce the BER. An adaptive algorithm is proposed to avoid the long convergence time of the conventional zero-forcing (ZF) algorithm applied to the DB detector, so that it can be applied to various bit rates and IL channels. In this study, the verification of this DB detector is accomplished at 56 Gb/s. The platform based on a 56-Gb/s analog front-end chip (AFEC) and field-programmable gate array (FPGA) proves that the detector can work well in 12–56 Gb/s and multiple IL channels. The BER was less than 2e-8 at 56 Gb/s on −42-dB channel loss at 28 GHz. The structure can be well used for higher rate transceivers, such as 112 Gb/s.
- 22 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (4) , 1042-1052
A Novel High-Speed Adaptive Duobinary Digital Detector Based on the Feed-Forward Equalizer and the Maximum Likelihood Sequence Detector for Wireline Transceivers
To solve the high bit error rate (BER) problem of conventional 56-Gb/s nonreturn-to-zero (NRZ) transceivers under high-insertion loss (IL) channels, this study proposes a high-speed adaptive duobinary (DB) digital detector based on the feed-forward equalizer (FFE) and the maximum likelihood sequence detector (MLSD). In this detector, adaptive FFE is combined with channel characteristics to generate DB signals and complete equalization, thus extending the transmission bandwidth and eye height and allowing a larger sampling phase offset. The parallel MLSD is used to complete the detection and decoding of DB signals to reduce the BER. An adaptive algorithm is proposed to avoid the long convergence time of the conventional zero-forcing (ZF) algorithm applied to the DB detector, so that it can be applied to various bit rates and IL channels. In this study, the verification of this DB detector is accomplished at 56 Gb/s. The platform based on a 56-Gb/s analog front-end chip (AFEC) and field-programmable gate array (FPGA) proves that the detector can work well in 12–56 Gb/s and multiple IL channels. The BER was less than 2e-8 at 56 Gb/s on −42-dB channel loss at 28 GHz. The structure can be well used for higher rate transceivers, such as 112 Gb/s.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (8) , 3739-3748
A Step-Reduced Impedance Transition Design for Bandwidth Enhancement in OC-MZM Transmitters
High-efficiency open-circuit-driven Mach-Zehnder modulator (OC-MZM) transmitters are susceptible to drive signal reflections that degrade signal quality. Conventional impedance matching suppresses reflection noise but limits the transmitter bandwidth. This paper presents a novel step-reduced impedance transition design scheme for the drive signal transmission path in OC-MZM transmitter that balances bandwidth enhancement and reflection suppression. Specifically, a negative reflection bandwidth enhancement technique is proposed to compensate for the high-frequency loss of the MZM traveling-wave electrodes by introducing a signal pre-emphasis effect. To prevent excessive reflections that inversely degrade signal quality, we utilize the eye-opening ratio (EOR) of the MZM average modulation voltage to assist in impedance optimization. An experimental OC-MZM transmitter prototype featuring the proposed impedance transition design demonstrated a 20% enhancement in transmitter bandwidth, a 101.4% improvement in eye-opening, and a reduction in TDECQ to 0.88 dB at 53 Gbaud, compared with the traditional impedance matching design.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (8) , 3739-3748
A Step-Reduced Impedance Transition Design for Bandwidth Enhancement in OC-MZM Transmitters
High-efficiency open-circuit-driven Mach-Zehnder modulator (OC-MZM) transmitters are susceptible to drive signal reflections that degrade signal quality. Conventional impedance matching suppresses reflection noise but limits the transmitter bandwidth. This paper presents a novel step-reduced impedance transition design scheme for the drive signal transmission path in OC-MZM transmitter that balances bandwidth enhancement and reflection suppression. Specifically, a negative reflection bandwidth enhancement technique is proposed to compensate for the high-frequency loss of the MZM traveling-wave electrodes by introducing a signal pre-emphasis effect. To prevent excessive reflections that inversely degrade signal quality, we utilize the eye-opening ratio (EOR) of the MZM average modulation voltage to assist in impedance optimization. An experimental OC-MZM transmitter prototype featuring the proposed impedance transition design demonstrated a 20% enhancement in transmitter bandwidth, a 101.4% improvement in eye-opening, and a reduction in TDECQ to 0.88 dB at 53 Gbaud, compared with the traditional impedance matching design.
- 20 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (8) , 2971-2980
CRFF: A Static Contention-Free 23T Flip-Flop With Three Clock Load Transistors for Ultra-Low-Power Applications
This article presents an ultra-low-power D flip-flop (FF) named clock-load reduced FF (CRFF), which employs 23 transistors with only three clock load transistors to support fully static, contention-free, and redundancy-free operations in a wide-supply-voltage range. In particular, to reduce the clock load, logic replacement is performed on clock-insensitive transistors. Moreover, a novel conditional charge scheme is adopted in internal clock signal (CKB), with which functionally identical transistors are merged and redundant transistors are removed for dynamic power and hardware overhead reduction. Finally, the presented CRFF and prior works are prototyped with a 22-nm ULL CMOS technology. Compared to the state-of-the-art low power FFs, the CRFF achieves the minimal clock loads, and measurement results show that the total power of the CRFF with 10% data activity is reduced from 48.8% to 17.0% at 0.9 V and 39.9% to 13.6% at 0.4 V, respectively. As a result, the CRFF is a prospective FF cell for the Internet-of-Things (IoT) and wearable computing scenarios.
- 20 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (8) , 2971-2980
CRFF: A Static Contention-Free 23T Flip-Flop With Three Clock Load Transistors for Ultra-Low-Power Applications
This article presents an ultra-low-power D flip-flop (FF) named clock-load reduced FF (CRFF), which employs 23 transistors with only three clock load transistors to support fully static, contention-free, and redundancy-free operations in a wide-supply-voltage range. In particular, to reduce the clock load, logic replacement is performed on clock-insensitive transistors. Moreover, a novel conditional charge scheme is adopted in internal clock signal (CKB), with which functionally identical transistors are merged and redundant transistors are removed for dynamic power and hardware overhead reduction. Finally, the presented CRFF and prior works are prototyped with a 22-nm ULL CMOS technology. Compared to the state-of-the-art low power FFs, the CRFF achieves the minimal clock loads, and measurement results show that the total power of the CRFF with 10% data activity is reduced from 48.8% to 17.0% at 0.9 V and 39.9% to 13.6% at 0.4 V, respectively. As a result, the CRFF is a prospective FF cell for the Internet-of-Things (IoT) and wearable computing scenarios.
- Open Access
- 23 June 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-6
Reducing DRAM Latency via In-situ Temperature- and Process-Variation-Aware Timing Detection and Adaption
Long DRAM access latency has a significant impact on modern system performance. However, the improvement of DRAM access latency is limited, as the DRAM vendors reserve considerable timing margins against seldom worst-case conditions. To mitigate such pessimistic timing margins, we propose a temperature- and process-variation-aware timing detection and adaption DRAM (TPDA-DRAM) architecture. It equips in-situ cross-coupled detectors to monitor the voltage difference between bitline pairs, enabling estimation of timing margins caused by process and temperature variations. Moreover, TPDA-DRAM incorporates two collaborative timing adaption schemes: 1) a process-variation-aware timing adaption scheme (PVA) that selectively accelerates the access to weak cells, and 2) a temperature-variation-aware timing adaption scheme (TVA) that precisely adjusts timing parameters by adopting temperature information. Compared to prior art, the proposed detector reduces detection deviation by 54.8% and area overhead by 88.1%. The system-level evaluation in an eight-core system shows that TPDA-DRAM improves the average performance and energy efficiency by 20.5% and 15.0%, respectively.
- 23 June 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-6
Open AccessReducing DRAM Latency via In-situ Temperature- and Process-Variation-Aware Timing Detection and Adaption
Long DRAM access latency has a significant impact on modern system performance. However, the improvement of DRAM access latency is limited, as the DRAM vendors reserve considerable timing margins against seldom worst-case conditions. To mitigate such pessimistic timing margins, we propose a temperature- and process-variation-aware timing detection and adaption DRAM (TPDA-DRAM) architecture. It equips in-situ cross-coupled detectors to monitor the voltage difference between bitline pairs, enabling estimation of timing margins caused by process and temperature variations. Moreover, TPDA-DRAM incorporates two collaborative timing adaption schemes: 1) a process-variation-aware timing adaption scheme (PVA) that selectively accelerates the access to weak cells, and 2) a temperature-variation-aware timing adaption scheme (TVA) that precisely adjusts timing parameters by adopting temperature information. Compared to prior art, the proposed detector reduces detection deviation by 54.8% and area overhead by 88.1%. The system-level evaluation in an eight-core system shows that TPDA-DRAM improves the average performance and energy efficiency by 20.5% and 15.0%, respectively.