Sergey S. Karlov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Sergey S. Karlov has a total of 118 co-authors. Here are the top co-authors by number of shared publications:
- Andrei V. Churakov
N.S. Kurnakov Institute of General and Inorganic Chemistry RAS Moscow Russia
18 shared publications Galina S. Zaitseva
Department of Chemistry, Moscow State University, Leninskye Gory 1, Moscow 119991, Russia
17 shared publications- Kirill V. Zaitsev
Department of Chemistry, Lomonosov Moscow State University, Moscow, Russian Federation
15 shared publications G. S. Zaitseva
Russian Academy of Sciences
12 shared publicationsBadma N. Mankaev
10 shared publicationsYuri F. Oprunenko
Chemistry Department, Lomonosov Moscow State University, Leninskye Gory 1, 119991 Moscow, Russia
10 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by MDPI AG in Inorganics
- Vol. 14 (9) , 231
Gallium and Indium Complexes with Bulky Pyridine-Bis(phenolate) Ligands: Synthesis, Structure, and Activity in Ring-Opening Polymerization of Cyclic Esters
A series of gallium and indium complexes bearing pyridine-2,6-bis(phenolate) ligands with ortho-substituents of increasing steric bulk (tBu, SiMe3, SiPh3) was synthesized via SiMe4 elimination from M(CH2SiMe3)3 (M = Ga, In). The gallium complexes 2a–c were structurally characterized by X-ray diffraction, revealing monomeric four-coordinate distorted trigonal pyramidal geometries. DOSY NMR studies revealed that the indium complexes 3a (tBu) and 3b (SiMe3) are dimeric in solution, whereas the bulkier 3c (SiPh3) is monomeric. All complexes were tested as initiators for ring-opening polymerization (ROP) of ε-caprolactone, L-lactide, and rac-lactide in the presence of benzyl alcohol. The M-CH2SiMe3 bond is inert toward alcohols, pointing to an activated monomer mechanism. Indium complexes exhibited higher activity than their gallium analogues, and the activity strongly depends on the ligand steric bulk: the most hindered SiPh3 derivative 3c showed the highest activity, reaching full ε-CL conversion in 24 h at 80 °C, whereas the analogous gallium complex 2c was almost inactive.
- 1 September 2026
- Published by MDPI AG in Inorganics
- Vol. 14 (9) , 231
Open AccessGallium and Indium Complexes with Bulky Pyridine-Bis(phenolate) Ligands: Synthesis, Structure, and Activity in Ring-Opening Polymerization of Cyclic Esters
A series of gallium and indium complexes bearing pyridine-2,6-bis(phenolate) ligands with ortho-substituents of increasing steric bulk (tBu, SiMe3, SiPh3) was synthesized via SiMe4 elimination from M(CH2SiMe3)3 (M = Ga, In). The gallium complexes 2a–c were structurally characterized by X-ray diffraction, revealing monomeric four-coordinate distorted trigonal pyramidal geometries. DOSY NMR studies revealed that the indium complexes 3a (tBu) and 3b (SiMe3) are dimeric in solution, whereas the bulkier 3c (SiPh3) is monomeric. All complexes were tested as initiators for ring-opening polymerization (ROP) of ε-caprolactone, L-lactide, and rac-lactide in the presence of benzyl alcohol. The M-CH2SiMe3 bond is inert toward alcohols, pointing to an activated monomer mechanism. Indium complexes exhibited higher activity than their gallium analogues, and the activity strongly depends on the ligand steric bulk: the most hindered SiPh3 derivative 3c showed the highest activity, reaching full ε-CL conversion in 24 h at 80 °C, whereas the analogous gallium complex 2c was almost inactive.
- Open Access
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
I1,10-Phenanthroline Complexes of Zinc as Highly Active Biocompatible Catalysts in Cyclic Oxalates Polymerization Displaying Unique Regioselectivity
Biodegradable polyoxalates are highly vulnerable to hydrolysis, making them promising absorbable materials. Such polymers can be readily produced by ring-opening polymerization (ROP) of cyclic oxalates. However, stannous octoate (SnOct2), commonly used as a polymerization catalyst, strongly limits the biomedical applications of the polyoxalates due to the considerable toxicity of tin-containing compounds. Here, we propose a series of efficient catalysts for ROP of propylene oxalate based on biocompatible metals (Zn or Al). The catalytic activity of ligand-free AlMe3 was similar to that of SnOct2. However, prominent troubles with the ROP initiation step were observed. In contrast, ZnEt2 demonstrated a 16-times acceleration of the ROP, keeping a favorable pattern of polymerization. Further increase in the catalytic activity was achieved with complexes of ZnEt2 bearing 1,10-phenanthroline derivatives. However, the complex with unsubstituted 1,10-phenanthroline induced undesirable end-group-specific transesterification with formation of linear oligomers with pyrene on both ends. The introduction of bulky substituents into the ligand structure efficiently suppressed this side process but lowered the polymerization rate. The complex with a butyl-substituted ligand was recognized as a promising catalyst with a structure optimally balancing these trends. All Zn-containing catalysts provided unique regioselectivity of polymerization, which was not described previously for cyclic esters ROP. Resulting polyoxalates were enriched by symmetrical head-to-head and tail-to-tail dyads, whereas head-to-tail dyads were in deficiency. The degree of regioregularity increased with the rise in steric hindrance. Thus, the biocompatible catalysts designed in this work pave the way to the synthesis of polyoxalates possessing a unique type of regioregularity.
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessI1,10-Phenanthroline Complexes of Zinc as Highly Active Biocompatible Catalysts in Cyclic Oxalates Polymerization Displaying Unique Regioselectivity
Biodegradable polyoxalates are highly vulnerable to hydrolysis, making them promising absorbable materials. Such polymers can be readily produced by ring-opening polymerization (ROP) of cyclic oxalates. However, stannous octoate (SnOct2), commonly used as a polymerization catalyst, strongly limits the biomedical applications of the polyoxalates due to the considerable toxicity of tin-containing compounds. Here, we propose a series of efficient catalysts for ROP of propylene oxalate based on biocompatible metals (Zn or Al). The catalytic activity of ligand-free AlMe3 was similar to that of SnOct2. However, prominent troubles with the ROP initiation step were observed. In contrast, ZnEt2 demonstrated a 16-times acceleration of the ROP, keeping a favorable pattern of polymerization. Further increase in the catalytic activity was achieved with complexes of ZnEt2 bearing 1,10-phenanthroline derivatives. However, the complex with unsubstituted 1,10-phenanthroline induced undesirable end-group-specific transesterification with formation of linear oligomers with pyrene on both ends. The introduction of bulky substituents into the ligand structure efficiently suppressed this side process but lowered the polymerization rate. The complex with a butyl-substituted ligand was recognized as a promising catalyst with a structure optimally balancing these trends. All Zn-containing catalysts provided unique regioselectivity of polymerization, which was not described previously for cyclic esters ROP. Resulting polyoxalates were enriched by symmetrical head-to-head and tail-to-tail dyads, whereas head-to-tail dyads were in deficiency. The degree of regioregularity increased with the rise in steric hindrance. Thus, the biocompatible catalysts designed in this work pave the way to the synthesis of polyoxalates possessing a unique type of regioregularity.
- Open Access
- 1 January 2026
- Published by Walter de Gruyter GmbH in e-Polymers
- Vol. 26 (1)
Novel β-amino-7-membered carbonates: ring-opening polymerization and copolymers with l-lactide, ε-caprolactone and trimethylene carbonate
Novel seven-membered cyclic carbonates bearing β-amino-protecting groups (Cbz, Boc) were synthesized from aspartic acid. Their homopolymerization and copolymerization with l -lactide ( l -LA), ε-caprolactone (ε-CL), and trimethylene carbonate (TMC) were conducted using stannous octoate catalyst. Both monomers showed high reactivity, reaching complete conversion within 30 min in homopolymerization and producing polymers with controlled molecular weights and narrow dispersity ( Đ ≈ 1.4–1.5). Copolymerizations at different ratios yielded copolymers with M n up to ∼9,100 g/mol. The copolymer microstructure was comonomer-dependent: blocky with ε-CL but statistical with l -LA. All homopolymers and most copolymers were amorphous, with homopolymer glass transition temperatures from 9 °C to 24 °C. These β-amino-substituted seven-membered cyclic carbonates are highly reactive monomers for developing functionalizable, biodegradable polycarbonates with tunable thermal properties for biomedical applications.
- 1 January 2026
- Published by Walter de Gruyter GmbH in e-Polymers
- Vol. 26 (1)
Open AccessNovel β-amino-7-membered carbonates: ring-opening polymerization and copolymers with l-lactide, ε-caprolactone and trimethylene carbonate
Novel seven-membered cyclic carbonates bearing β-amino-protecting groups (Cbz, Boc) were synthesized from aspartic acid. Their homopolymerization and copolymerization with l -lactide ( l -LA), ε-caprolactone (ε-CL), and trimethylene carbonate (TMC) were conducted using stannous octoate catalyst. Both monomers showed high reactivity, reaching complete conversion within 30 min in homopolymerization and producing polymers with controlled molecular weights and narrow dispersity ( Đ ≈ 1.4–1.5). Copolymerizations at different ratios yielded copolymers with M n up to ∼9,100 g/mol. The copolymer microstructure was comonomer-dependent: blocky with ε-CL but statistical with l -LA. All homopolymers and most copolymers were amorphous, with homopolymer glass transition temperatures from 9 °C to 24 °C. These β-amino-substituted seven-membered cyclic carbonates are highly reactive monomers for developing functionalizable, biodegradable polycarbonates with tunable thermal properties for biomedical applications.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Polymer Science, Series B
- Vol. 67 (6) , 29
A Novel Cyclic Carbonate Monomer, α-Propyl Trimethylene Carbonate: Synthesis, Homopolymerization, and Copolymerization with ε-Caprolactone
A novel α-n-propyl-substituted seven-membered cyclic carbonate (α-n-Pr-TEMC) was synthesized and used to prepare its homopolymer and statistical copolymer with ε-caprolactone (ε-CL). Homopolymerization via Sn(Oct)2-catalyzed ring-opening polymerization proceeded in a controlled manner. The α‑n-propyl substituent effectively moderated the monomer’s reactivity, enabling its statistical copolymerization with ε-CL, as confirmed by NMR analysis. DSC curves demonstrated transition from a semi-crystalline homopolymer to a copolymer with suppressed crystallinity. This work demonstrates α-n-Pr-TEMC’s utility as a comonomer for tailoring the properties of biodegradable polyesters.
- 1 December 2025
- Published by Pleiades Publishing Ltd in Polymer Science, Series B
- Vol. 67 (6) , 29
A Novel Cyclic Carbonate Monomer, α-Propyl Trimethylene Carbonate: Synthesis, Homopolymerization, and Copolymerization with ε-Caprolactone
A novel α-n-propyl-substituted seven-membered cyclic carbonate (α-n-Pr-TEMC) was synthesized and used to prepare its homopolymer and statistical copolymer with ε-caprolactone (ε-CL). Homopolymerization via Sn(Oct)2-catalyzed ring-opening polymerization proceeded in a controlled manner. The α‑n-propyl substituent effectively moderated the monomer’s reactivity, enabling its statistical copolymerization with ε-CL, as confirmed by NMR analysis. DSC curves demonstrated transition from a semi-crystalline homopolymer to a copolymer with suppressed crystallinity. This work demonstrates α-n-Pr-TEMC’s utility as a comonomer for tailoring the properties of biodegradable polyesters.
- 13 November 2025
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 44 (22) , 2663-2670
The Redox Properties of Germylenes Based on Alkyl- and Aryl-Substituted Diethylenetriamines
- 13 November 2025
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 44 (22) , 2663-2670
The Redox Properties of Germylenes Based on Alkyl- and Aryl-Substituted Diethylenetriamines
- Open Access
Novel β-Benzyloxy-Substituted Copolymers of Seven-Membered Cyclic Carbonate: Ring-Opening Polymerization with L-Lactide, ε-Caprolactone and Trimethylenecarbonate
To prepare novel biodegradable copolymers with functional substituents that are distributed statistically or randomly over the macromolecule chain and have improved characteristics compared to homopolymers, we conducted a series of synthetic experiments with a novel cyclic monomer, 5-(benzyloxy)-1,3-dioxepan-2-one (4). This compound was synthesized, and its homopolymer, as well as its copolymers with L-lactide, ε-caprolactone and trimethylene carbonate, were prepared in a polymerization solution with stannous octoate as the initiator. The formation of the copolymers was confirmed using NMR spectroscopy and DSC data. The distribution of the monomeric units of the substituted 7CC in the copolymers with L-lactide and ε-caprolactone is random, as it is close to a statistical distribution. The copolymer with TMC is a gradient copolymer due to the different rates of monomer polymerization. The copolymer with a composition of 10(ε-CL):1(carbonate 4) can be considered a promising polymer after the deprotection of the hydroxy group for the inoculation of the functional substituents due to its convenience of preparation and properties similar to those of poly(ε-caprolactone).
Open AccessNovel β-Benzyloxy-Substituted Copolymers of Seven-Membered Cyclic Carbonate: Ring-Opening Polymerization with L-Lactide, ε-Caprolactone and Trimethylenecarbonate
To prepare novel biodegradable copolymers with functional substituents that are distributed statistically or randomly over the macromolecule chain and have improved characteristics compared to homopolymers, we conducted a series of synthetic experiments with a novel cyclic monomer, 5-(benzyloxy)-1,3-dioxepan-2-one (4). This compound was synthesized, and its homopolymer, as well as its copolymers with L-lactide, ε-caprolactone and trimethylene carbonate, were prepared in a polymerization solution with stannous octoate as the initiator. The formation of the copolymers was confirmed using NMR spectroscopy and DSC data. The distribution of the monomeric units of the substituted 7CC in the copolymers with L-lactide and ε-caprolactone is random, as it is close to a statistical distribution. The copolymer with TMC is a gradient copolymer due to the different rates of monomer polymerization. The copolymer with a composition of 10(ε-CL):1(carbonate 4) can be considered a promising polymer after the deprotection of the hydroxy group for the inoculation of the functional substituents due to its convenience of preparation and properties similar to those of poly(ε-caprolactone).
- 9 July 2024
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 43 (20) , 2480-2485
Diamidoamine Aluminum Complex as Effective Initiator for Random Copolymerization of Substituted Carbonate with L-Lactide
- 9 July 2024
- Published by American Chemical Society (ACS) in Organometallics
- Vol. 43 (20) , 2480-2485
Diamidoamine Aluminum Complex as Effective Initiator for Random Copolymerization of Substituted Carbonate with L-Lactide