Alemu Workie Kebede
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alemu Workie Kebede has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Himadri Majumder
Department of Mechanical Engineering, G H Raisoni College of Engineering & Management, Pune, India
7 shared publications - Bappa Mondal
GMR Institute of Technology (GMRIT)—Deemed to be University
3 shared publications Harshad Deshpande
Department of Mechanical Engineering, PES’s Modern College of Engineering, Pune, India
3 shared publicationsSameer Bhosale
Department of Mechanical Engineering, PES’s Modern College of Engineering, Pune, India
3 shared publicationsBhagyesh Balwantrao Deshmukh
Department of Mechanical Engineering, Walchand Institute of Technology, Solapur, India
2 shared publications- Chinmaya Kumar Sahoo
Department of Mechanical Engineering, National Institute of Technology Silchar, Silchar, Assam, India
2 shared publications
Latest Publications
- Open Access
- 16 November 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (11) , e0361981
Prediction of MMAW performance on nanostructured hardfaced alloys using general regression neural network: A case study
Manual metal arc welding (MMAW) is popular in hardfacing operations to enhance the surface integrity and increase the working life of important industrial parts. The functional performance of nanostructured hardfaced alloys is strongly affected by welding factors, which cannot be considered linearly but interact in a complex, non-linear way with mechanical features and tribological behaviour.To predict the performance characteristics of MMAW nanostructured hardfaced alloys, a General Regression Neural Network (GRNN) was employed in the present work. We obtained statistical results for hardness, tensile strength, and wear resistance from systematic experimental trials conducted under different welding conditions. We used these data to train and test the GRNN model, and we quantitatively evaluated its predictive accuracy using the coefficient of determination (R 2 ) and root mean square error (RMSE). The model showed strong predictive ability, indicating its usefulness in modelling complex non-linear associations among process and performance factors and their responses. This paper demonstrates that GRNN is a reliable and effective means of improving the quality and consistency of nanostructured hardfaced surfaces for industrial use while optimizing MMAW process parameters.
- 16 November 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (11) , e0361981
Open AccessPrediction of MMAW performance on nanostructured hardfaced alloys using general regression neural network: A case study
Manual metal arc welding (MMAW) is popular in hardfacing operations to enhance the surface integrity and increase the working life of important industrial parts. The functional performance of nanostructured hardfaced alloys is strongly affected by welding factors, which cannot be considered linearly but interact in a complex, non-linear way with mechanical features and tribological behaviour.To predict the performance characteristics of MMAW nanostructured hardfaced alloys, a General Regression Neural Network (GRNN) was employed in the present work. We obtained statistical results for hardness, tensile strength, and wear resistance from systematic experimental trials conducted under different welding conditions. We used these data to train and test the GRNN model, and we quantitatively evaluated its predictive accuracy using the coefficient of determination (R 2 ) and root mean square error (RMSE). The model showed strong predictive ability, indicating its usefulness in modelling complex non-linear associations among process and performance factors and their responses. This paper demonstrates that GRNN is a reliable and effective means of improving the quality and consistency of nanostructured hardfaced surfaces for industrial use while optimizing MMAW process parameters.
- Open Access
- 27 October 2026
- Published by Springer Nature in Scientific Reports
Predictive modelling and optimization of material removal rate in WEDM of carbon fiber reinforced polymer composites
- 27 October 2026
- Published by Springer Nature in Scientific Reports
Open AccessPredictive modelling and optimization of material removal rate in WEDM of carbon fiber reinforced polymer composites
- Open Access
- 11 October 2026
- Published by Springer Nature in Scientific Reports
Performance and emission analysis of a diesel engine fueled with rice-bran and lemon-peel oil biodiesel blends
- 11 October 2026
- Published by Springer Nature in Scientific Reports
Open AccessPerformance and emission analysis of a diesel engine fueled with rice-bran and lemon-peel oil biodiesel blends
- Open Access
- 15 August 2026
- Published by Springer Nature in Discover Applied Sciences
IoT-enabled quality assurance for manual Shielded Metal Arc Welding (SMAW) during on-site fabrication: a critical review
- 15 August 2026
- Published by Springer Nature in Discover Applied Sciences
Open AccessIoT-enabled quality assurance for manual Shielded Metal Arc Welding (SMAW) during on-site fabrication: a critical review
- Open Access
- 20 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Experimental evaluation on the influence of soot removal with novel sonic horn and supersonic air nozzle on heat transfer performance of boiler economizer
- 20 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessExperimental evaluation on the influence of soot removal with novel sonic horn and supersonic air nozzle on heat transfer performance of boiler economizer
- Open Access
- 9 July 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1) , 118
Numerical and experimental investigation of mixing performance in wavy micromixers with in-phase and out-of-phase wall configurations
- 9 July 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1) , 118
Open AccessNumerical and experimental investigation of mixing performance in wavy micromixers with in-phase and out-of-phase wall configurations
- Open Access
- 2 July 2026
- Published by SAGE Publications in Energy Exploration & Exploitation
Next-generation eco-energy systems for renewable energy, emerging technologies, and sustainable low-carbon pathways
The transition toward renewable energy systems is necessary for climate change mitigation, improving energy security, and achieving sustainability objectives. This review offers a critical evaluation of the new eco-energy technologies that contribute to low-carbon and circular energy technologies as a whole. The current review analyses recent developments in renewable electricity production, sustainable fuels production, energy storage systems, battery recycling, perovskite solar cells (PSCs), bioenergy systems, and waste-to-electricity technology. Special emphasis is made on novel approaches to seawater-to-fuels conversion, carbon dioxide usage, next-generation rechargeable batteries, environment-friendly lithium-ion battery recycling, and microbial fuel cells. Besides providing an overview of recent innovations in the field, this review evaluates the degree of technical maturity, efficiency, scaleability, environmental impacts, and commercialization issues of the considered technologies. An integrated approach is used to show the possibility of synergy between renewable energy production, resource recovery, sustainable fuels and circular economy solutions in order to promote carbon-neutral energy systems. This review explores some of the advancements made in renewable electricity generation, seawater to fuel processes, CO 2 conversion methods, next-generation batteries, battery recycling, PSCs, bioenergy, and waste-to-electricity processes as these contribute to the transition toward carbon-neutral and circular energy systems.
- 2 July 2026
- Published by SAGE Publications in Energy Exploration & Exploitation
Open AccessNext-generation eco-energy systems for renewable energy, emerging technologies, and sustainable low-carbon pathways
The transition toward renewable energy systems is necessary for climate change mitigation, improving energy security, and achieving sustainability objectives. This review offers a critical evaluation of the new eco-energy technologies that contribute to low-carbon and circular energy technologies as a whole. The current review analyses recent developments in renewable electricity production, sustainable fuels production, energy storage systems, battery recycling, perovskite solar cells (PSCs), bioenergy systems, and waste-to-electricity technology. Special emphasis is made on novel approaches to seawater-to-fuels conversion, carbon dioxide usage, next-generation rechargeable batteries, environment-friendly lithium-ion battery recycling, and microbial fuel cells. Besides providing an overview of recent innovations in the field, this review evaluates the degree of technical maturity, efficiency, scaleability, environmental impacts, and commercialization issues of the considered technologies. An integrated approach is used to show the possibility of synergy between renewable energy production, resource recovery, sustainable fuels and circular economy solutions in order to promote carbon-neutral energy systems. This review explores some of the advancements made in renewable electricity generation, seawater to fuel processes, CO 2 conversion methods, next-generation batteries, battery recycling, PSCs, bioenergy, and waste-to-electricity processes as these contribute to the transition toward carbon-neutral and circular energy systems.
- Open Access
- 25 June 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (6) , e0342112
Computational evaluation of fluid flow influencing geometrical parameters of cyclone separator for Cement Kiln
Cyclone separators are integral to cement kiln operations, serving as key devices for mitigating air pollution and reducing particulate matter. Computational Fluid Dynamics (CFD) simulations enable visualization of internal flow distribution and provide quantitative insights into separator performance. A numerical CFD model was developed for the cyclone geometry, with the simulation results validated against existing experimental data. This study employs the design of experiments (DoE) technique to optimize design parameters and to examine how distinctive geometric features influence cyclone efficiency. An optimization study utilizing the design of experiments (DoE) technique was conducted to refine the design parameters for enhanced cyclone performance. This study investigated the impact of modifying key geometrical features of a cyclone separator on its performance metrics. The fluid flow performance influencing geometrical parameters considered in this study are the inlet height ratio (I H /D b = 0.25 to 0.75), inlet width ratio (I W /D b = 0.1 to 0.3), particle exit diameter ratio (D e /D b = 0.2 to 0.4), bottom cone length ratio (L c /D b = 1.75 to 2.75), and vortex finder diameter and length ratio (D v /D b and L v /D b = 0.25 to 0.75). Here, the term “ratio” refers to the ratio of the respective dimension to the cyclone barrel diameter (D b ). The optimized design features an inlet height ratio of 0.5, an inlet width ratio of 0.21, a particle exit diameter ratio of 0.26, a bottom cone length of 2.31, and a vortex finder with a 0.5 in diameter and a 0.55 in length. This configuration resulted in a pressure drop of 285 Pa and an efficiency of 96%.
- 25 June 2026
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 21 (6) , e0342112
Open AccessComputational evaluation of fluid flow influencing geometrical parameters of cyclone separator for Cement Kiln
Cyclone separators are integral to cement kiln operations, serving as key devices for mitigating air pollution and reducing particulate matter. Computational Fluid Dynamics (CFD) simulations enable visualization of internal flow distribution and provide quantitative insights into separator performance. A numerical CFD model was developed for the cyclone geometry, with the simulation results validated against existing experimental data. This study employs the design of experiments (DoE) technique to optimize design parameters and to examine how distinctive geometric features influence cyclone efficiency. An optimization study utilizing the design of experiments (DoE) technique was conducted to refine the design parameters for enhanced cyclone performance. This study investigated the impact of modifying key geometrical features of a cyclone separator on its performance metrics. The fluid flow performance influencing geometrical parameters considered in this study are the inlet height ratio (I H /D b = 0.25 to 0.75), inlet width ratio (I W /D b = 0.1 to 0.3), particle exit diameter ratio (D e /D b = 0.2 to 0.4), bottom cone length ratio (L c /D b = 1.75 to 2.75), and vortex finder diameter and length ratio (D v /D b and L v /D b = 0.25 to 0.75). Here, the term “ratio” refers to the ratio of the respective dimension to the cyclone barrel diameter (D b ). The optimized design features an inlet height ratio of 0.5, an inlet width ratio of 0.21, a particle exit diameter ratio of 0.26, a bottom cone length of 2.31, and a vortex finder with a 0.5 in diameter and a 0.55 in length. This configuration resulted in a pressure drop of 285 Pa and an efficiency of 96%.
- Open Access
- 24 June 2026
- Published by Springer Nature in Scientific Reports
Investigating the effects of high and low heat input on the mechanical properties of API 5L L415Q welds using GTAW and SMAW processes
Weld quality is an important parameter in ensuring the overall safety and integrity of pipelines made from high-strength steel used for the transmission of oil and natural gas. In multi-layer pipeline welding, poor heat input control can result in excessive reinforcement, lack of fusion, unsatisfactory microstructural changes, and poor mechanical properties. Hence, in the current research, the effects of Low Heat Input (LHI) and High Heat Input (HHI) on the shape, thermal behaviour, and mechanical properties of API 5 L L415Q pipeline steel were analyzed via welding using the GTAW-SMAW process. The GTAW process is used for the root pass, while the SMAW process is used for the hot, fill, and cap passes. A combination of Taguchi experimental design and desirability-based multi-response optimization was used to determine the optimal values of welding current, welding voltage, welding travel speed, heat input, and reinforcement properties for individual passes. Welding parameters were verified through tensile tests, impact energy tests, hardness tests, bend tests, macroexamination, non-destructive testing, and field-scale application of the developed welding technique. Both LHI and HHI welding conditions produced welded joints that met the API pipeline welding specifications. LHI welding conditions offered better penetration consistency and a more uniform hardness distribution, since the thermal cycle was lower and the cooling rate was higher. In contrast, HHI welding conditions yielded higher impact energy in the weld metal at the fusion line and in the heat-affected zones, due to variations in the thermal cycle. The heat-input optimization strategy also resulted in reduced grain coarsening and a balanced metallurgical balance between strength and toughness. Moreover, industrial-scale validation of 250 pipeline girth welds has indicated consistent welding quality, acceptable geometry, and the absence of critical weld defects on radiographic testing.
- 24 June 2026
- Published by Springer Nature in Scientific Reports
Open AccessInvestigating the effects of high and low heat input on the mechanical properties of API 5L L415Q welds using GTAW and SMAW processes
Weld quality is an important parameter in ensuring the overall safety and integrity of pipelines made from high-strength steel used for the transmission of oil and natural gas. In multi-layer pipeline welding, poor heat input control can result in excessive reinforcement, lack of fusion, unsatisfactory microstructural changes, and poor mechanical properties. Hence, in the current research, the effects of Low Heat Input (LHI) and High Heat Input (HHI) on the shape, thermal behaviour, and mechanical properties of API 5 L L415Q pipeline steel were analyzed via welding using the GTAW-SMAW process. The GTAW process is used for the root pass, while the SMAW process is used for the hot, fill, and cap passes. A combination of Taguchi experimental design and desirability-based multi-response optimization was used to determine the optimal values of welding current, welding voltage, welding travel speed, heat input, and reinforcement properties for individual passes. Welding parameters were verified through tensile tests, impact energy tests, hardness tests, bend tests, macroexamination, non-destructive testing, and field-scale application of the developed welding technique. Both LHI and HHI welding conditions produced welded joints that met the API pipeline welding specifications. LHI welding conditions offered better penetration consistency and a more uniform hardness distribution, since the thermal cycle was lower and the cooling rate was higher. In contrast, HHI welding conditions yielded higher impact energy in the weld metal at the fusion line and in the heat-affected zones, due to variations in the thermal cycle. The heat-input optimization strategy also resulted in reduced grain coarsening and a balanced metallurgical balance between strength and toughness. Moreover, industrial-scale validation of 250 pipeline girth welds has indicated consistent welding quality, acceptable geometry, and the absence of critical weld defects on radiographic testing.
- Open Access
- 15 June 2026
- Published by SAGE Publications in Energy Exploration & Exploitation
- Vol. 44 (6) , 3449-3474
A brief review on analysis and recent advancements in new solar cells using nanotechnology
The growing global demand for sustainable and efficient energy systems has accelerated advancements in solar cell technologies. This review presents a systematic and quantitative analysis of recent developments in solar cells enabled by nanotechnology. A PRISMA-based methodology is adopted to ensure transparency and reproducibility in literature selection. Key nanomaterials such as perovskites, quantum dots, graphene, and carbon nanotubes are critically evaluated based on power conversion efficiency (PCE), stability, cost, and environmental impact. Additionally, nano-enhanced thermal systems including photovoltaic-thermal (PVT) systems, nanofluids, and phase change materials (PCM) are analyzed using thermodynamic principles. The review highlights major challenges such as degradation mechanisms, scalability, and toxicity while proposing a future research roadmap focused on stability engineering and sustainable material design.
- 15 June 2026
- Published by SAGE Publications in Energy Exploration & Exploitation
- Vol. 44 (6) , 3449-3474
Open AccessA brief review on analysis and recent advancements in new solar cells using nanotechnology
The growing global demand for sustainable and efficient energy systems has accelerated advancements in solar cell technologies. This review presents a systematic and quantitative analysis of recent developments in solar cells enabled by nanotechnology. A PRISMA-based methodology is adopted to ensure transparency and reproducibility in literature selection. Key nanomaterials such as perovskites, quantum dots, graphene, and carbon nanotubes are critically evaluated based on power conversion efficiency (PCE), stability, cost, and environmental impact. Additionally, nano-enhanced thermal systems including photovoltaic-thermal (PVT) systems, nanofluids, and phase change materials (PCM) are analyzed using thermodynamic principles. The review highlights major challenges such as degradation mechanisms, scalability, and toxicity while proposing a future research roadmap focused on stability engineering and sustainable material design.