LWLiang Wang

Liang Wang

*This is an algorithmically generated author record based on publicly available information.

Liang Wang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A New Method for Determining Production Profiles Based on Intelligent Slow-Release Chemical Tracers

    by Liang Wang, Lingang Lv, Peng Chen

    With the development of tracer technology and the improvement of fine management in oil fields, chemical tracer monitoring is widely used to analyze the production profiles in commingled wells and horizontal wells. However, most existing tracer technologies can only determine the production profile and cannot calculate the water cut. This paper proposes an intelligent slow-release chemical tracer monitoring technology and a corresponding interpretation methodology, which can quantify the oil and water production rates and dynamically analyze the water cut of production profiles by simultaneous deployment of oil-soluble and water-soluble tracers. To validate this approach, this method was applied to well A of the Bohai Oilfield. The results showed that the calculation model based on produced tracer concentration can quantitatively determine the production profile and water cut of the monitored well. During the stable production period, Well A exhibited high production rates and a low water cut, and the contribution of oil production varied greatly among different layers. The first and third sections were identified as the main contributors, accounting for 51.8% and 23.2% of production, respectively, while the second and fourth sections showed lower contributions of 15.1% and 9.9%. The water cut of each section was below 30%. This intelligent slow-release tracer monitoring technology allowed for continuous production profiles in the monitored well. The proposed method provides effective guidance for characterizing the production profile and water flooding patterns of each layer. It is helpful for the efficient development of oil and gas reservoirs.


  • Open Access

    Application of a Reservoir Classification Method Based on Core Data from Offshore Tight Reservoirs: A Case Study of the Liushagang Formation in the Beibu Basin

    by Xinchen Gao, Liang Wang, Zihao Zeng, Qiangyu Li, Yuhang Jin, Kangliang Guo

    Several methods are currently used to test offshore tight reservoirs. However, the effectiveness of these applications varies among wells, and some exhibit unclear reservoir classifications. These issues lead to difficulties in decision-making during tests and result in higher testing costs. Therefore, to address this issue, this study used reservoirs in the Liushagang Formation of the Beibu Basin as the research object and employed core data to apply the multi-stage FZI method. This method computes the FZI and its cumulative probability, classifying the target reservoir into seven distinct types. According to the Winland R35 method, the target reservoir was classified into five distinct types. Seven characteristic parameters were selected based on the mercury injection experimental data. The K-means clustering method was then used to classify the target reservoirs into two types. The conclusions were that, in this formation, there is predominantly low to extra-low porosity and extra-low to ultra-low permeability. According to relationship models, logged porosity can be used to calculate effective permeability. Combining the multi-stage FZI method with the K-means clustering method for reservoir classification is recommended. This integrated approach facilitates a more comprehensive analysis of the characteristics of offshore low-permeability tight reservoirs at both macro and micro scales after classification. This research provides key insights for enhancing offshore well production.