Shizhao Zhang
Research Subjects
Shizhao Zhang has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Bin Gong
China University of Geosciences, Wuhan, China
1 shared publication - Fangkai Quan
Scientific Research and Development Platform of Technology of Disaster Prevention in Deep Coal Mines, Anhui University of Science and Technology, Huainan 232000, China
1 shared publication - HaoQiang Wu
China University of Geosciences, Wuhan, China
1 shared publication - He Shi
PetroChina Coalbed Methane Company, Beijing 100028, China
1 shared publication - Heng Zhao
School of Earth Resources, China University of Geosciences, Wuhan 430074, China
1 shared publication - Hongya Wang
PetroChina Coalbed Methane Company Limited, Beijing 100028, China
1 shared publication
Latest Publications
- Open Access
Adsorption Pore Volume Distribution Heterogeneity of Middle and High Rank Coal Reservoirs and Determination of Its Influencing Factors
Heterogeneity of adsorption pore volume distribution affects desorption and diffusion processes of coal reservoirs. In this paper, N2 and CO2 adsorption and desorption experiment tests were used to study the pore structure of middle and high rank coal reservoirs in the study area. The fractal theory of volume and surface area is used to achieve a full-scale fractal study of adsorption pores (pore diameter is less than 100 nm) in the study area. Firstly, adaptability and control factors of volume fractals and surface area fractals within the same aperture scale range are studied. Secondly, fractal characteristics of micro-pores and meso-pores are studied. Thirdly, fractal characteristics within different aperture scales and the influencing factors of fractal characteristics within different scale ranges are studied. The results are as follows. With the increase in coal rank, pore volume and specific surface area of pores less than 0.8 nm increase, and dominant pore size changes from 0.55~0.8 nm (middle coal rank) to 0.5~0.7 nm (high coal rank). As coal rank increases, TPV and average pore diameter (APD) decrease under the BJH model, while SSA changes are not significant under the BET model. Moreover, as the pore diameter decreases, the correlation between the integral dimension of pore volume and degree of coal metamorphism decreases. This result can provide a theoretical basis for the precise characterization of the target coal seam pore and fracture structure and support the optimization of favorable areas for coalbed methane.
Open AccessAdsorption Pore Volume Distribution Heterogeneity of Middle and High Rank Coal Reservoirs and Determination of Its Influencing Factors
Heterogeneity of adsorption pore volume distribution affects desorption and diffusion processes of coal reservoirs. In this paper, N2 and CO2 adsorption and desorption experiment tests were used to study the pore structure of middle and high rank coal reservoirs in the study area. The fractal theory of volume and surface area is used to achieve a full-scale fractal study of adsorption pores (pore diameter is less than 100 nm) in the study area. Firstly, adaptability and control factors of volume fractals and surface area fractals within the same aperture scale range are studied. Secondly, fractal characteristics of micro-pores and meso-pores are studied. Thirdly, fractal characteristics within different aperture scales and the influencing factors of fractal characteristics within different scale ranges are studied. The results are as follows. With the increase in coal rank, pore volume and specific surface area of pores less than 0.8 nm increase, and dominant pore size changes from 0.55~0.8 nm (middle coal rank) to 0.5~0.7 nm (high coal rank). As coal rank increases, TPV and average pore diameter (APD) decrease under the BJH model, while SSA changes are not significant under the BET model. Moreover, as the pore diameter decreases, the correlation between the integral dimension of pore volume and degree of coal metamorphism decreases. This result can provide a theoretical basis for the precise characterization of the target coal seam pore and fracture structure and support the optimization of favorable areas for coalbed methane.
- Open Access
Investigation into Enhancing Methane Recovery and Sequestration Mechanism in Deep Coal Seams by CO2 Injection
Injecting CO2 into coal seams to enhance coal bed methane (ECBM) recovery has been identified as a viable method for increasing methane extraction. This process also has significant potential for sequestering large volumes of CO2, thereby reducing the concentration of greenhouse gases in the atmosphere. However, for deep coal seams where formation pressure is relatively high, there is limited research on CO2 injection into systems with higher methane adsorption equilibrium pressure. Existing studies, mostly confined to the low-pressure stage, fail to effectively reveal the impact of factors such as temperature, high-pressure CO2 injection, and coal types on enhancing the recovery and sequestration of CO2-displaced methane. Thus, this study aims to investigate the influence of temperature, pressure, and coal types on ECBM recovery and CO2 sequestration in deep coal seams. A series of CO2 core flooding tests were conducted on various coal cores, with CO2 injection pressures ranging from 8 to 18 MPa. The CO2 and methane adsorption rates, as well as methane displacement efficiency, were calculated and recorded to facilitate result interpretation. Based on the results of these physical experiments, numerical simulation was conducted to study multi-component competitive adsorption, desorption, and seepage flow under high temperature and high pressure in a deep coal seam’s horizontal well. Finally, the optimization of the total injection amount (0.7 PV) and injection pressure (approximately 15.0 MPa) was carried out for the plan of CO2 displacement of methane in a single well in the later stage.
Open AccessInvestigation into Enhancing Methane Recovery and Sequestration Mechanism in Deep Coal Seams by CO2 Injection
Injecting CO2 into coal seams to enhance coal bed methane (ECBM) recovery has been identified as a viable method for increasing methane extraction. This process also has significant potential for sequestering large volumes of CO2, thereby reducing the concentration of greenhouse gases in the atmosphere. However, for deep coal seams where formation pressure is relatively high, there is limited research on CO2 injection into systems with higher methane adsorption equilibrium pressure. Existing studies, mostly confined to the low-pressure stage, fail to effectively reveal the impact of factors such as temperature, high-pressure CO2 injection, and coal types on enhancing the recovery and sequestration of CO2-displaced methane. Thus, this study aims to investigate the influence of temperature, pressure, and coal types on ECBM recovery and CO2 sequestration in deep coal seams. A series of CO2 core flooding tests were conducted on various coal cores, with CO2 injection pressures ranging from 8 to 18 MPa. The CO2 and methane adsorption rates, as well as methane displacement efficiency, were calculated and recorded to facilitate result interpretation. Based on the results of these physical experiments, numerical simulation was conducted to study multi-component competitive adsorption, desorption, and seepage flow under high temperature and high pressure in a deep coal seam’s horizontal well. Finally, the optimization of the total injection amount (0.7 PV) and injection pressure (approximately 15.0 MPa) was carried out for the plan of CO2 displacement of methane in a single well in the later stage.