IPIgor Palamarchuk

Igor Palamarchuk

*This is an algorithmically generated author record based on publicly available information.

Igor Palamarchuk has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mechanical fracture energy and structural-mechanical properties of meat snacks with beekeeping additives

    by Artem Antoniv, Igor Palamarchuk, Leonora Adamchuk, Marija Zheplinska

    The choice of an effective technological scheme of food production is mainly determined by the need to meet consumer needs, healthy eating requirements, compliance with environmental trends, energy efficiency of the main processes of the technology used. The technology of meat chicken snacks with the addition of such biologically active additives as honey, propolis and bee pollen allows you to meet these factors due to the convenience of consumption, high protein content, ease of storage and preparation. The addition of bee pollen allows you to increase the nutritional value of the product and classify it as a health product. The tests were based on the hypothesis that when the product is destroyed, the force applied to cut the sample is proportional to the structural resistance and energy parameters, which allow you to assess the quality characteristics of snacks through the tenderness or hardness of the finished product. Experimental studies of the force and energy processes of chicken snack processing were carried out separately for a control sample of chicken fillet and spices and samples with a developed recipe, in which, together with the meat base, such beekeeping products as honey, propolis aqueous extract and bee pollen were added. The experiments were conducted to understand the behavior of the product under load, which is important for assessing their quality, safety, as well as adjusting the production processes of meat snacks to ensure high resistance to mechanical loads in practical application conditions. In general, all used samples of meat snacks with beekeeping products demonstrated effective mechanical properties as for the use of a food product; the determined parameters of the critical strength limit allow avoiding structural failure modes under excessive loads. The research results provide opportunities to optimize formulations, justify operating modes to prevent premature material failure under load, improve the structure and efficiency of technological processes based on minimizing energy consumption, preserving structural properties, improving the quality of finished products, and increasing their competitiveness in the market.


  • Open Access

    Hybrid Technology of Beet Pulp Dewatering with Process Intensification in a Convection Dryer as an Element of Sustainable Processing of Agro-Industrial Waste into Bioenergy

    by Igor Palamarchuk, Olesia Priss, Oksana Zozulyak, Liudmyla Kiurcheva, Oksana Vasylenko, Konstiantyn Dyadyura, Zdzislawa Romanowska-Duda, Andrzej Obraniak, Szymon Szufa, Taras Hutsol

    In the studied process of moisture removal there is an increase in the driving force, due to centrifugation during rotor rotation, the emergence of electroosmotic pressure when creating conditions for one-sided diffusion, the filtering of the technological mass of the load through the rotor perforations, as well as the introduction of low-frequency oscillations of the dryer’s actuators. Therefore, the purpose of this scientific study is to substantiate the operating modes of the vibration convective dryer by evaluating the amplitude–frequency parameters of the beet pulp dehumidification process. According to the results of the studies, the use of the angular velocity of the drive shaft of the vibrator in the range of 80…110 rad/s and the amplitude of oscillations within 2.5…3.0 mm allow the process to be carried out at maximum energy consumption of about 700…750 W. The developed technology involves the sequential implementation of vibration, filtration, and electroosmotic technological action, which allows for a reduction in the duration of beet pulp processing during dehumidification by almost two times compared to the duration when performing filtration moisture removal in a stationary layer of products. Low-frequency oscillations with force field acceleration (of the order of 2…3 g) are used to create a pseudo rapid layer of products before convective processing, and when this parameter is reduced to (0.9…1.0 g), they ensure maximum compaction of the pulp mass, which significantly increases the efficiency of electroosmotic moisture removal. Such a combination of the noted physical and mechanical factors makes it possible to reduce the specific energy consumption for the removal of 1 kg of moisture by 2.7 times compared to traditional convective drying.


  • Mathematical Modeling by the Factorial Area Method in Evaluating the Quality Characteristics of the Studied Samples

    by Igor Palamarchuk, Volodymyr Zavialov, Yuanxia Fu, Vladyslav Palamarchuk, Nataliia Popova


  • Open Access

    ОЦІНКА ЯКОСТІ ЗРАЗКІВ КИТАЙСЬКИХ КОВБАС ЗА ДОПОМОГОЮ МАТЕМАТИЧНИХ МОДЕЛЕЙ «ФАКТОРНИХ ПЛОЩ» ЗА ВМІСТОМ МІНЕРАЛЬНИХ КОМПОНЕНТІВ

    by І. П. Паламарчук, Ф. Юанься, Н. П. Загорко, В. В. Бочарнікова

    Серед китайських можна відзначити сосиски з м’яса, які стійкі до зберігання; ковбаси з нежирного м’яса із сильними приправами; солоні, тверді та висушені на повітрі пивні ковбаси; солодкі ковбаси зі смаком сичуані та гострі ковбаси з кантонським смаком. До недоліків технологій виготовлення таких ковбас зараховують тривалий часу сушіння, високу залежність від температури та вологості, що впливають на якість і смак продукту; недостатньо високу продуктивність виробництва продукції. Тому метою наукової праці було обрано пошук та реалізацію ефективної оцінки якісних характеристик китайських ковбас. При створенні математичної моделі висунуто гіпотезу про те, що визначальні параметри продукції створюють відповідні якісні простори, взаємодія яких формує властивості продукції. Розроблений автором метод оцінювання якісних характеристик продукції передбачає застосування безрозмірних критеріїв оцінки, які можна отримати при їх співвідношенні з нормативними або рекомендованими характеристиками. Критеріями оцінки досліджуваних китайських ковбас обрано коефіцієнт відповідності заданому інтервалу якості та коефіцієнт відповідності граничним нормативним величинам, які реалізовують загальнорегламентовані критерії якості для цієї продукції. За результатами моделювання виявилося, що за вмістом мінеральних компонентів незадовільна оцінка стосується ковбас овочевої та свинячої звичайної. Водночас зразки ковбас кантонської та пивної показують позитивну зміну динаміки якісних параметрів.

  • Open Access

    Assessment of the Ecological Safety of Honey with the Help of “Factor Area” Models

    by Igor Palamarchuk, Leonora Adamchuk, Vladyslav Palamarchuk, Mykola Andrushchenko, Olesia Priss, Szymon Glowacki, Taras Hutsol, Olena Bezaltychna

    The man-made load on the environment and the decrease in biodiversity cause a direct negative environmental impact on the existence of honey bees and beekeeping products. The priority directions of the food industry are the use of high-quality environmentally friendly raw materials and the prevention of the ingress and formation of harmful substances in food products, including honey. This implies the need to develop methods for assessing the environmental safety of the studied raw materials and products. The purpose of this study was to implement a mathematical modeling method for studying the environmental safety of honey. Five types of honey were studied: Robinia, rapeseed, linden, buckwheat, and sunflower. Mathematical models were built according to the following parameters: total activity of β-emitting radionuclides; residues of levomycetin (chloramphenicol), nitrofuran (according to AOZ and AMOZ), metronidazole, and pesticides (according to hexachloran); and the content of water-insoluble substances (mechanical impurities) and heavy metals. On the basis of the obtained data and established quality criteria, calculation graphic models were built. Using algebraic methods, they derived new formulas for calculating quality coefficients. Multivariate analysis and programming methods were used to evaluate honey using mathematical modeling. The most and least ecologically dangerous contaminants and their share of influence for different types of honey were determined based on the complex of research on negative factors. The proposed mathematical models can be implemented for practical use in specialized laboratories as a tool for determining the environmental safety of honey of various botanical origins.


  • Open Access

    МАТЕМАТИЧНІ МОДЕЛІ ЯКОСТІ М’ЯСОПРОДУКТІВ З РОСЛИННИМИ ДОМІШКАМИ

    by І. П. Паламарчук, Н. П. Загорко, Я. В. Яременко, Н. С. Сватова

    У якості предмета досліджень використовували м’ясні продукти та напівфабрикати з домішками рослинного та тваринного походження. Варених ковбасні вироби, а саме сосиски, мали у структурі борошно дикорослої спельти та подрібнені гриби шампіньйонів. Це дозволило збагатити продукцію харчовими волокнами, мінералами та жирними кислотами зі специфічним смаком та запахом. Січені м’ясні напівфабрикати містили у своєму складі комплексну харчову добавку на основі тваринної і рослинної сировини у межах від 0,5 до 1,5%. Існуючі математичні моделі якості харчової продукції обмежуються лише аналізом органолептичних характеристик, що реалізовується створенням та колегіальним рішенням спеціальної експертної комісії. Така структура оцінки викликає певні труднощі організаційного характеру та має явно виражений суб’єктивний характер, практично не опирається на цифрову інформацію, що є у наявності на основі результатів експериментальних досліджень. Тому метою наукової роботи стало розробка та апробація математичних моделей якості представленої вище продукції за такими схемами, як лінійна одновимірна променева та площинна у вигляді багатокутника. Розроблені математичні моделі відзначаються простотою складання та високою наочністю, можливістю обробки достатньо великого обсягу інформації, застосування необмеженої кількості параметрів для порівняльної оцінки. Використані критерії оцінки представлені безрозмірними комплексами, що дозволяють об’єктивно оцінювати факторний простір як за різноплановими самостійними параметрами, так і за розгалуженими сімействами споріднених характеристик. Представлені методи математичного аналізу нівелюють її суб’єктивний характер, що у цілому дозволяє значно поліпшити адекватність оцінки стану продукціїоцінити стан варених ковбас для досліджуваних та контрольного зразків як за умовною факторною площиною, так і за окремими критеріями оцінки. Спільним для розроблених моделей стало використання окремо негативних і позитивних критеріїв оцінки.

  • Evaluation of the Energy Efficiency of the Process of Vibratory Mixing of Multicomponent Bulk Raw Material of Food Industries

    by Igor Palamarchuk, Marija Zheplinska, Volodymyr Vasyliv, Maxim Gudzenko, Nadia Zubar, Oksana Martyniv

    An experimental sample of a vibrating drum machine with kinematic excitation of oscillations has been developed, which is a measurement base for evaluating the kinematic and energy characteristics of the executive organs of the oscillatory system. High technological results were obtained when using combined kinematic vibration excitation, which is characterized by a minimum mass of oscillating masses of parts compared to traditional unbalanced vibration exciters, which allows to reduce the energy consumption for the drive of the investigated vibration massage machine by 2-2.5 times


  • Open Access

    Modelling the centrifugal mixing process of minced meat to optimise the production of chopped meat semi-finished products

    by Igor Palamarchuk, Mikhailo Mushtruk, Volodymyr Vasyliv, Eugeniy Stefan, Olesia Priss, Iryna Babych, Inna Karpovych, Nataliia Pushanko

    One of the most important problems in ensuring the quality of mincemeat preparation in the production of sausages is the effective structuring of components and mixing of their ingredients. To solve this problem, researchers added a multifunctional admixture based on whey protein in the process of centrifugal mixing of the components, which determined the composition of the factor space of the investigated process. Based on the results of the research, the effective content of whey protein, sodium alginate, and soy fiber in the developed recipe was proven, which showed high characteristics in terms of fat-retaining and moisture-retaining ability, digestibility, pH level – activity, and other parameters. The developed formulation made it possible to improve the general indicator of the balance of amino acids in the product and increase the functional-technological and quality parameters of the developed products. The physical and mechanical characteristics of the obtained meat product were evaluated based on the results of physical and mathematical modelling. Modelling was carried out using Federman-on-Buckingham's second similarity theory and the "dimension theory" method, which allows the processing of the obtained experimental data in the form of a criterion equation, which was compiled using Froude, Euler, and Sherwood criteria. The purpose of this study was to obtain dependencies between such process factors as product density, the coefficient of dynamic viscosity of the technological medium, the ultimate shear stress, the change in the concentration of the main impurities of lactic acid in the raw material, the value of the diffusion coefficient and the coefficient of mass transfer in the loading mass, the weight of one load of products, the angular frequency of rotation of the screws of the minced meat mixer, the radius of the rotating working bodies, the characteristic size of the products after grinding. Using the complex criterion equation and the developed program, we find a recommended set of operating mode parameters for preparing minced meat under the conditions of centrifugal influence on the mixing process and the action of the specified factors.


  • Open Access

    Physical and mathematical modelling of the massing process of marinated pork and beef preparation technology

    by Igor Palamarchuk, Oksana Shtonda, Kateryna Semeniuk, Oksana Topchii, Alla Petryna

    The main process in the technology of natural marinated semi-finished meat products is the marinating process, which depends on the marinating method, temperature conditions, and composition of the marinade mixture. To enhance the distribution of marinades within the meat, mechanical processing of the raw material is necessary, specifically using the massaging process, to achieve uniform distribution of curing agents, changes in structure, and increased activity of enzymatic systems utilized in marinades. The main goal of this study is to model the massaging process, which allows the processing of the obtained experimental data in the form of a criterion equation. For the research, 8 samples were used, including 3 experimental pork samples and 1 control, as well as 3 experimental beef samples and 1 control. The main components of the samples include pork meat, beef meat, canola oil, sunflower oil, olive oil, curing ingredients, spices and seasonings, bromelain enzyme, and yeast extract. To carry out the massaging process in the investigated procedure, a massager of the model MAL 50-1500 was employed. The research results indicate that the determined mass transfer equation demonstrates a predominant influence in the investigated massaging process, involving changes in the concentration of sunflower, canola, and olive oil in the product, affecting the diffusion coefficient, size of dispersed phase particles, and mass transfer coefficient within the load.


  • Open Access

    Mathematical modelling of quality assessment of cooked sausages with the addition of vegetable additives

    by Mikhailo Mushtruk, Igor Palamarchuk, Vladyslav Palamarchuk, Maxim Gudzenko, Nataliia Slobodyanyuk, Dmitry Zhuravel, Ievgenii Petrychenko, Оksana Pylypchuk

    We studied the physicochemical composition and functional and technological properties of plant additives - wheat fibre with pumpkin pectin (WFwPP). The nutritional value of cooked sausages was increased when fibre was added to the recipe. We have replaced fatty pork meat with up to 5% WFwPP. Supplementation with fibre improves product digestibility "in vitro". We have used mathematical modelling, linear, flat, and spatial estimation models developed in a radial scheme, polygon, and polyhedron to optimize the content of essential amino acids. We have developed a new recipe for the composition of cooked sausage with wheat fibre and pumpkin pectin with the optimal proportion of main ingredients: beef grade I – 30%, fatty pork – 50%, WFwPP – 5%, water. Compared to the control sample, the finished product's organoleptic characteristics improved. The basis of the mathematical model for assessing the quality of the developed cooked sausage with wheat fibre and pumpkin pectin was chosen flat model of the polygon, taking into account the time of preservation of product quality, which was assessed as a result of regression analysis. The quality assessment results of the developed products using a computer program for calculating the area of quality profiles with subsequent graphical visualization are consistent with the organoleptic studies, which confirms the reliability of the results and the adequacy of the developed mathematical model.