AJAiru Ji

Airu Ji

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Airu Ji has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Magnetic Flux Continuity vs. Stress: A Critical Trade-off in Shielding Performance Analysis of Magnetic Shields

    by Jinji Sun, Airu Ji, Zhangtao Shen, Daiyong Chen, Jing Ye, Ming Liu, Pengfei Wang

    Magnetic shielding technology has been widely used in precision measurement of extremely-weak magnetic fields. For nearly static magnetic fields, the most effective shielding strategy is to divert the magnetic flux into the magnetic shields according to the Ohm's law for magnetic circuits. These magnetic shields, particularly the large-scale ones, are typically assembled by overlapping soft magnetic materials, e.g., μ-metal. Previous research studies have shown that both mechanical stress and magnetic flux continuity at the joints of the shielding shells critically influence the ultimate magnetic shielding performance of magnetic shields. However, at the joints of the shielding shells, achieving an optimal balance between magnetic flux continuity and mechanical stress remains a major engineering challenge. Combining the experiments and theoretical modeling analysis, this work reveals that at the joints of the shielding shells, increased mechanical stress at the joints degrades the permeability of μ-metal but simultaneously enhances magnetic flux continuity. Under the investigated experimental conditions, the enhancement in magnetic shielding effectiveness associated with improved magnetic flux continuity is observed to be on the order of several times greater than the degradation resulting from stress-induced permeability reduction. Within the tested range, the best shielding performance was achieved when magnetic flux continuity was effectively ensured while the applied mechanical stress remained at the minimum level necessary to maintain joint contact. This work can proffer valuable insights into the design and construction of magnetic shields for precision measurement of extremely-weak magnetic field, notably advanced magnetic shields for biomagnetism detection.

  • Static Analysis and Eccentric Design Combining Permanent Magnets With Inner Rotor on Drag-Cup Motor

    by Jinji Sun, Airu Ji, Gen Xing, Haoxi Sun

    Precision attitude control in aerospace systems requires drag-cup permanent magnet brushless DC motors with extremely low torque ripple. Conventional permanent magnet sinusoidal shaping (PMSS) can reduce air-gap field total harmonic distortion (THD), but typically relies on a single eccentricity configuration, which can approach process or magnetization limits and produce suboptimal flux waveforms. This paper introduces a novel combined eccentricity design approach that integrates permanent magnets (PMs) and inner rotor sinusoidal shaping (PMIRSS), guided by the equivalent surface current method and finite element analysis (FEA). Various eccentricity combinations are evaluated through static simulations and validated experimentally. The proposed design reduces air-gap THD to 2.26%, compared to 29.62% for the non-eccentric baseline, a reduction of 92.4%, while maintaining a competitive maximum flux density (Bmax). These results demonstrate a strong synergistic effect between rotor and PM eccentricity. Based on the results, this paper proposes recommendations for normalized eccentricity and an appropriate Bmax interval to improve cross-scale compatibility. The results show that simultaneously optimizing the eccentricity of the rotor and PMs can produce uniform air-gap flux, suppress high-order harmonics, and avoid local saturation, resulting in smoother torque and minimized ripple. The combined eccentric motor is ideal for high-precision aerospace applications such as control torque gyroscopes, magnetically levitated flywheels, and high-power precision drives.

  • Open Access

    A Progressive Loss Decomposition Method for Low-Frequency Shielding of Soft Magnetic Materials

    by Airu Ji, Jinji Sun

    Energy loss in shielding soft magnetic materials at low frequencies (1–100 Hz) can cause fluctuations in the material’s magnetic field, and the resulting magnetic noise can interfere with the measurement accuracy and basic precision physics of biomagnetic signals. This places higher demands on the credibility and accuracy of loss separation predictions. The current statistical loss theory (STL) method tends to ignore the high impact of the excitation dependence of quasi-static loss in the low-frequency band on the prediction accuracy. STL simultaneously fits and predicts multiple unknown quantities, causing its results to occasionally fall into the value boundary, and the credibility is low in the low-frequency band and with less data. This paper proposes a progressive loss decomposition (PLD) method. Through multi-step progressive predictions, the hysteresis loss simulation coefficients are first determined. The experimental data of the test ring verifies the credibility of PLD’s prediction of the two hysteresis coefficients, improving the inapplicability of the STL method. In addition, we use the proposed method to obtain the prediction results of the low-frequency characteristics of the loss of a variety of typical soft magnetic materials, providing a reference for analyzing the loss characteristics of materials.