Erick Noboa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Erick Noboa has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- György Eigner
Biomatics and Applied Artificial Intelligence Institute, John von Neumann Faculty of Informatics, Obuda University, 1034 Budapest, Hungary
3 shared publications - Péter Galambos
Óbuda University
2 shared publications - Borsa Détár
Antal Bejczy Center for Intelligent Robotics, Robotics Special College, University Research and Innovation Center, Óbuda University, Bécsi út 96/B, H-1034 Budapest, Hungary
1 shared publication - Döníz Borsos
Óbuda University
1 shared publication - Eva Henrietta Dulf
Department of Automation, Technical University of Cluj Napoca, Cluj-Napoca, Romania
1 shared publication - Gergely Márton
Research Centre for Natural Sciences, Eötvös Loránd Research Network, Magyar Tudósok krt. 2., H-1117 Budapest, Hungary
1 shared publication
Latest Publications
- Open Access
- 20 May 2026
- Published by MDPI AG in Technologies
- Vol. 14 (5) , 308
Portable Holonomic Educational Robot Platform for Home Laboratory—Study Case: AI-Based Electromyography Control
The post-pandemic evolution of education involving mechatronics and machine learning has shifted the demand for robotic hardware from centralized laboratories to accessible laboratories in home environments. This paper presents a portable three-wheeled holonomic robotic platform designed for remote research and home office experimentation. The proposed system utilizes a modular design and low-cost philosophy comprising a custom embedded control system driven by an ESP32-WROOM microcontroller, which manages a closed-loop PID velocity controller using Hall effect feedback from three DC micromotors. In contrast, external nodes allow the reception, conditioning, and classification of 8-channel surface electromyography (sEMG) data sampled at 500 Hz. To address the non-stationarity and stochastic noise in raw sEMG signals, this study implements a hybrid Deep Learning (DL) architecture that complements 2D Convolutional Neural Networks (CNN) for spatial feature extraction with Long Short-Term Memory (LSTM) networks for temporal context awareness. This model decodes the neuromuscular intent of the user into real-time holonomic velocity vectors, achieving validation accuracies of 80.51% for horizontal movement, 84.86% for vertical translation, and 99.56% for the Fist/no-Fist state. By synthesizing advanced AI-based teleoperation with a portable design, this study establishes a scalable framework for the next generation of “laboratory-at-home” educational tools and research regardless of physical location.
- 20 May 2026
- Published by MDPI AG in Technologies
- Vol. 14 (5) , 308
Open AccessPortable Holonomic Educational Robot Platform for Home Laboratory—Study Case: AI-Based Electromyography Control
The post-pandemic evolution of education involving mechatronics and machine learning has shifted the demand for robotic hardware from centralized laboratories to accessible laboratories in home environments. This paper presents a portable three-wheeled holonomic robotic platform designed for remote research and home office experimentation. The proposed system utilizes a modular design and low-cost philosophy comprising a custom embedded control system driven by an ESP32-WROOM microcontroller, which manages a closed-loop PID velocity controller using Hall effect feedback from three DC micromotors. In contrast, external nodes allow the reception, conditioning, and classification of 8-channel surface electromyography (sEMG) data sampled at 500 Hz. To address the non-stationarity and stochastic noise in raw sEMG signals, this study implements a hybrid Deep Learning (DL) architecture that complements 2D Convolutional Neural Networks (CNN) for spatial feature extraction with Long Short-Term Memory (LSTM) networks for temporal context awareness. This model decodes the neuromuscular intent of the user into real-time holonomic velocity vectors, achieving validation accuracies of 80.51% for horizontal movement, 84.86% for vertical translation, and 99.56% for the Fist/no-Fist state. By synthesizing advanced AI-based teleoperation with a portable design, this study establishes a scalable framework for the next generation of “laboratory-at-home” educational tools and research regardless of physical location.
- Open Access
Developing a Health Support System to Promote Care for the Elderly
In light of the demographic shift towards an aging population, there is an increasing prevalence of dementia among the elderly. The negative impact on mental health is preventing individuals from taking proper care of themselves. For individuals requiring hospital care, those receiving home care, or as a precaution for a specific individual, it is advantageous to utilize monitoring equipment to track their biological parameters on an ongoing basis. This equipment can minimize the risk of serious accidents or severe health hazards. The objective of the present research project is to design an armband with an accurate location tracking system. This is of particular importance for individuals with dementia and Alzheimer’s disease, who frequently leave their homes and are unable to find their way back. The proposed armband also includes a fingerprint identification system that allows only authorized personnel to use it. Furthermore, in hospitals and healthcare facilities the biometric identification system can be used to trace periodic medical or nursing visits. This process improves the reliability and transparency of healthcare. The test results indicate that the armband functions in accordance with the desired design specifications, with performance evaluation of the main features including fall detection, where a hit rate of 100% was obtained, a fingerprint recognition test demonstrating accuracy from 88% to 100% on high-quality samples, and a GPS tracking test determining position with a difference of between 1.8 and 2.1 m. The proposed solution may be of benefit to healthcare professionals, supported housing providers, elderly people as target users, or their family members.
Open AccessDeveloping a Health Support System to Promote Care for the Elderly
In light of the demographic shift towards an aging population, there is an increasing prevalence of dementia among the elderly. The negative impact on mental health is preventing individuals from taking proper care of themselves. For individuals requiring hospital care, those receiving home care, or as a precaution for a specific individual, it is advantageous to utilize monitoring equipment to track their biological parameters on an ongoing basis. This equipment can minimize the risk of serious accidents or severe health hazards. The objective of the present research project is to design an armband with an accurate location tracking system. This is of particular importance for individuals with dementia and Alzheimer’s disease, who frequently leave their homes and are unable to find their way back. The proposed armband also includes a fingerprint identification system that allows only authorized personnel to use it. Furthermore, in hospitals and healthcare facilities the biometric identification system can be used to trace periodic medical or nursing visits. This process improves the reliability and transparency of healthcare. The test results indicate that the armband functions in accordance with the desired design specifications, with performance evaluation of the main features including fall detection, where a hit rate of 100% was obtained, a fingerprint recognition test demonstrating accuracy from 88% to 100% on high-quality samples, and a GPS tracking test determining position with a difference of between 1.8 and 2.1 m. The proposed solution may be of benefit to healthcare professionals, supported housing providers, elderly people as target users, or their family members.
- Open Access
PlatypOUs—A Mobile Robot Platform and Demonstration Tool Supporting STEM Education
Given the rising popularity of robotics, student-driven robot development projects are playing a key role in attracting more people towards engineering and science studies. This article presents the early development process of an open-source mobile robot platform—named PlatypOUs—which can be remotely controlled via an electromyography (EMG) appliance using the MindRove brain–computer interface (BCI) headset as a sensor for the purpose of signal acquisition. The gathered bio-signals are classified by a Support Vector Machine (SVM) whose results are translated into motion commands for the mobile platform. Along with the physical mobile robot platform, a virtual environment was implemented using Gazebo (an open-source 3D robotic simulator) inside the Robot Operating System (ROS) framework, which has the same capabilities as the real-world device. This can be used for development and test purposes. The main goal of the PlatypOUs project is to create a tool for STEM education and extracurricular activities, particularly laboratory practices and demonstrations. With the physical robot, the aim is to improve awareness of STEM outside and beyond the scope of regular education programmes. It implies several disciplines, including system design, control engineering, mobile robotics and machine learning with several application aspects in each. Using the PlatypOUs platform and the simulator provides students and self-learners with a firsthand exercise, and teaches them to deal with complex engineering problems in a professional, yet intriguing way.
Open AccessPlatypOUs—A Mobile Robot Platform and Demonstration Tool Supporting STEM Education
Given the rising popularity of robotics, student-driven robot development projects are playing a key role in attracting more people towards engineering and science studies. This article presents the early development process of an open-source mobile robot platform—named PlatypOUs—which can be remotely controlled via an electromyography (EMG) appliance using the MindRove brain–computer interface (BCI) headset as a sensor for the purpose of signal acquisition. The gathered bio-signals are classified by a Support Vector Machine (SVM) whose results are translated into motion commands for the mobile platform. Along with the physical mobile robot platform, a virtual environment was implemented using Gazebo (an open-source 3D robotic simulator) inside the Robot Operating System (ROS) framework, which has the same capabilities as the real-world device. This can be used for development and test purposes. The main goal of the PlatypOUs project is to create a tool for STEM education and extracurricular activities, particularly laboratory practices and demonstrations. With the physical robot, the aim is to improve awareness of STEM outside and beyond the scope of regular education programmes. It implies several disciplines, including system design, control engineering, mobile robotics and machine learning with several application aspects in each. Using the PlatypOUs platform and the simulator provides students and self-learners with a firsthand exercise, and teaches them to deal with complex engineering problems in a professional, yet intriguing way.