MLMingfeng Li

Mingfeng Li

*This is an algorithmically generated author record based on publicly available information.

Mingfeng Li has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study on the Influence of Unbalanced Phase Difference Combinations on Vibration Characteristics of Rotor Systems

    by Yiming Cao, Shijie Zhong, Xuejun Li, Mingfeng Li, Jie Bian

    Taking the cantilever rotor of a turbine engine as the research object, a dynamic and finite-element model of the cantilever rotor is established, and the effectiveness of the model is verified by the rotor test platform. The transfer function method is used to balance the rotor system under unbalanced excitation, and the experiments prove that the method adopted in this paper has a good balancing effect and effectively reduces the vibration of the unbalanced rotor. On this basis, the experimental tests and simulation analyses of the rotor vibration response under different unbalanced phases and difference combinations are carried out, and the influence of the unbalanced phase’s difference combinations on unbalance and dynamic balance is analyzed. The results show that the vibration response of the system decreases with the increase in the unbalanced phase difference combinations, and the amplitude of the vibration induced by the unbalance of the reverse combination is smaller than that of the in-phase combination. The work in this paper can provide a theoretical basis for the dynamic balance and vibration control of the flexible rotor of an aero-engine.


  • Open Access

    Unbalanced Position Recognition of Rotor Systems Based on Long and Short-Term Memory Neural Networks

    by Yiming Cao, Changzhi Shi, Xuejun Li, Mingfeng Li, Jie Bian

    Rotor unbalance stands as one of the primary causes of vibration and noise in rotating equipment. Accurate identification of unbalanced positions enables targeted measures for balance correction, thereby reducing vibration and noise levels and enhancing the operational efficiency and stability of the equipment. However, the complexity of rotor structures may lead to a diversity of vibration transmission paths, which complicates the identification of unbalanced positions. In this paper, an experimental platform for rotor systems is established to analyze the change patterns of vibration displacement in rotor systems at four unbalanced positions. Additionally, a rotor dynamics model is developed based on the finite element method and verified through experiments. Furthermore, an unbalanced rotor position identification method based on Long Short-Term Memory (LSTM) neural networks is proposed. This method utilizes multiple sets of measured response data and simulated data from unbalanced rotor positions to train the LSTM network, achieving precise identification of unbalanced positions at various rotational speeds. The research results indicate that under subcritical, critical, and supercritical speeds, the identification accuracy based on measured data reaches 95.5%, while the accuracy based on simulated data remains at a high level of 90.5%. These results fully validate the effectiveness and accuracy of the proposed model and identification method, providing new insights and technical means for identifying unbalanced rotor positions.


  • Open Access

    Research on Unbalanced Vibration Characteristics and Assembly Phase Angle Probability Distribution of Dual-Rotor System

    by Hui Li, Changzhi Shi, Xuejun Li, Mingfeng Li, Jie Bian

    This paper addresses the complex issue of vibration response characteristics resulting from the unbalanced assembly of the double rotors in the 31F aero-engine. The study investigates the vibration response behavior of the dual-rotor system through the adjustment of rotor assembly phase angle. Initially, a dynamic model of the four-disk, five-pivot dual-rotor system is established, with its natural frequencies and vibration modes verified. The influence of size and the position of the unbalance on the vibration amplitude in the dual-rotor system is analyzed. Additionally, the probability distribution of the assembly phase angles for both the compressor and turbine sections of the low-pressure rotor is examined. The results indicate that for the low-pressure rotor exhibiting excessive vibration, adjusting the assembly phase angle of the rotors’ system’s compressor or the turbine section by 180 degrees leads to a vibration qualification rate of 70.1435%. This finding is consistent with the observations from the field experience method used in the former Soviet Union. Finally, corresponding experimental verification is conducted.