Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Khadija Ramzan has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Study of Raw and HMDS-Treated Pigment-Rich Agro-Industrial By-Products as Functional Fillers in PDMS Composites

    by Khadija Ramzan, Sana Ullah, Sajjad Ahmad, Mudassar Hussain, Syeda Hijab Zehra, Aiste Balciunaitiene, Pranas Viskelis, Jonas Viskelis

    Agro-industrial by-products from beetroot, raspberry, sea buckthorn, and shadbush are valuable sources of natural pigments and renewable filler materials, but their hydrophilic surfaces limit compatibility with hydrophobic polydimethylsiloxane (PDMS) matrices. This study evaluated the effect of catalyst-free vapor-phase hexamethyldisilazane (HMDS) treatment of pigment-rich powders and their incorporation into PDMS composites at 5 and 20 wt.% filler loadings. Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy, and contact angle measurements were used to characterize surface modifications. Mechanical behavior under puncture loading was evaluated using texture analysis. FTIR confirmed successful silylation through the reduction in hydroxyl groups and the emergence of silicon-containing functionalities. Treated fillers exhibited rougher, more irregular surfaces, which suggested improved filler dispersion and interfacial compatibility within the PDMS matrix. Modified composites showed enhanced hydrophobicity, with contact angles up to 102.84°. Composites containing 5 wt.% HMDS-treated raspberry filler demonstrated the highest puncture resistance and elasticity, indicating improved interfacial interactions. In contrast, 20 wt.% filler loading generally reduced puncture resistance and elasticity, possibly due to increased particle agglomeration and reduced matrix continuity, as suggested by the SEM observations, whereas shadbush-filled composites showed decreased performance after treatment. Overall, HMDS surface modification effectively improves the compatibility of pigment-rich agro-waste fillers with PDMS and supports their use as functional fillers and natural colorant sources in silicone-based composites, providing a value-added route for the utilization of agro-industrial by-products.


  • Exploring the antidiabetic nutraceutical potential of fruits waste, a revolutionary approach for diabetes mellitus treatment

    by Samran Khalid, Muqaddas Zahid, Sumbal Raana, Khadija Ramzan, Syeda Hijab Zehra, Sadia Ansar, Madiha Rafique, Kashmala Chaudhary, Helen Onyeaka


  • Open Access

    Valorization of Fruit and Vegetable Waste: An Approach to Focusing on Extraction of Natural Pigments

    by Khadija Ramzan, Syeda Hijab Zehra, Aiste Balciunaitiene, Pranas Viskelis, Jonas Viskelis

    The increasing demand for functional foods has spurred interest in bioactive compounds, particularly their role in health promotion and disease prevention. This review comprehensively explores the bioavailability, mechanisms of action, and potential applications of bioactive compounds derived from natural food sources. We have systematically compiled and synthesized data from the recent scientific literature, including peer-reviewed journal articles, clinical studies, and meta-analyses, to present an in-depth evaluation of these compounds’ physicochemical properties, stability, and interactions within food matrices. Furthermore, this review discusses advanced delivery systems, such as nanoencapsulation and emulsification, for enhancing bioavailability and targeted release. By addressing critical gaps in the understanding of the functional and technological aspects of bioactive compounds, this review underscores their relevance in formulating novel nutraceuticals and functional foods. The insights presented herein provide a foundation for future research and practical applications in the food industry, ultimately contributing to improving human health and well-being. Although recovering bioactive compounds from food waste is a sustainable way to reduce waste and use resources, additional research is required to make these procedures more efficient for use on an industrial scale.


  • Open Access

    Heavy Metals Assessment in Different Fresh and Processed Tuber Crops Grown with Fresh and Sewage Water

    by Khadija Ramzan, Muhammad Atif Randhawa, Maria Seher, Syeda Hijab Zehra

    The problems from heavy metals content increasing day by day over the world. Heavy metal contamination in vegetables has become a serious food safety concern in developing Asian countries, including Pakistan. Due to lack of clean water resources in many Asian countries, sewage water is frequently utilized to irrigate the crops, particularly in Pakistan. Irrigation of sewage water may increase the levels of heavy metals in such soil, which eventually transfer to crops. In humans, these metals induce a variety of illnesses, i.e. cancer. In this study, the concentrations of heavy metals (As, Pb, Cd, Hg, Co and Cr) in raw and processed tuber vegetables irrigated with ground water and sewage water were compared utilizing a wet digesting method. Different levels of heavy metals in raw, oven baked, air fried and deep-fried vegetables have been evaluated. Results showed higher levels of heavy metals in vegetables grown with sewage water and were above the permissible limits. It also shows that different processing methods had a significant effect on the level of heavy metals but was unable to reduce it to the safe limit designated by FAO and WHO. Maximum level of percentage decrease of lead (Pb) and cadmium (Cd) was found in deep fried vegetables.


  • Open Access

    Advancements in Green Synthesis of Silver-Based Nanoparticles: Antimicrobial and Antifungal Properties in Various Films

    by Syeda Hijab Zehra, Khadija Ramzan, Jonas Viskelis, Pranas Viskelis, Aiste Balciunaitiene

    Nanotechnology is an evolving field that presents extensive opportunities in antimicrobial and eco-friendly food packaging applications. Silver nanoparticles (AgNPs) are particularly valuable in this context due to their outstanding physicochemical properties and demonstrated biological and antimicrobial efficacy, rendering them highly effective in food packaging applications. Historically, nanoparticle synthesis has largely relied on synthetic chemicals and physical methods; however, growing awareness of their potential toxic impacts on human health and the environment has led researchers to reassess these conventional approaches. In response, green synthesis using plants or their metabolites to produce nanoparticles (NPs) has emerged as a focal point in recent research. This approach provides significant advantages, notably in reducing toxicity associated with traditionally synthesized nanoparticles. Silver, recognized for its non-toxic, safe profile as an inorganic antibacterial and antifungal agent, has been employed for centuries and exhibits remarkable potential in various biological applications in its nanoparticle form. Environmentally friendly synthesis techniques are increasingly prioritized within chemical sciences to reduce the harmful byproducts of reactions. Green synthesis methods also offer economic benefits due to their lower costs and the abundant availability of natural raw materials. In the past five years, concerted efforts have been made to develop new, sustainable, and cost-effective methodologies for nanoparticle synthesis. This review explains the green synthesis of silver nanoparticles from different sources along with their quantification techniques and application in food packaging.


  • Open Access

    Deep Fat Frying Characteristics of Malpoa: Kinetics, Heat, and Mass Transfer Modeling

    by Puneeta Gupta, Imdadul Hoque Mondal, Kshirod Kumar Dash, Geetika, Tejas Suthar, Khadija Ramzan, Endre Harsanyi, Ayaz Mukarram Shaikh, Kovács Béla

    This article investigated deep-frying characteristics of malpoa for varied frying time (2–10 min) and temperature (170–190 °C). The evaluation encompassed a comprehensive analysis of textural and color kinetics and heat and mass transfer modeling during deep fat frying of malpoa balls. Such investigations confirmed an enhancement in fat content from 10.2 to 41.65%. On the other hand, textural properties such as hardness, cohesiveness, and springiness varied from 3.14 to 22.59 N/mm, 0.22 to 0.76, and 15.5 to 49.56, respectively. Similarly, color parameters such as b*/a* and ΔE varied from 3.31 to 1.55 and 55.36 to 75.48. For the textural and color kinetics, the activation energies ranged between 58.65 and 85.82 kJ/mol and 31.34 and 64.34 kJ/mol. Similarly, for a variation in frying time from 2 to 10 min, responses (hardness, cohesiveness, springiness, and overall color) varied across the following ranges: 3.15–13.57 N, 0.22–0.66, 15.5–35.5, and 55.63–63.50 and 5.60–20.60 N, 0.30–0.77, 22.35–49.56, and 62.26–75.65 for temperatures of 170 and 190 degrees, respectively. On the other hand, heat and mass transfer analysis indicated a Biot number and heat transfer coefficient within the range of 0.31–0.65 and 25.58–34.64 for 170–190 °C. Thus, this investigation provides a deeper insight of the deep fat frying characteristics of malpoa. This provides a guideline for the food processing sector for such products.