Ermis Koutsaftis-Fragkos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Ermis Koutsaftis-Fragkos has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Dimitris Malamis
Department of Civil and Environmental Engineering, College of Engineering, Design & Physical Sciences, Brunel University of London, London UB8 3PH, UK
2 shared publications - Elli Maria Barampouti
Unit of Environmental Science & Technology, School of Chemical Engineering, National Technical University of Athens, Zographou Campus, 9 Iroon Polytechniou Str., 15780 Athens, Greece
2 shared publications - Panagiotis Fotios Chatzimaliakas
Unit of Environmental Science & Technology, School of Chemical Engineering, National Technical University of Athens, Zografou Campus, 9 Heroon Polytechniou St., 15780 Athens, Greece
2 shared publications - Sofia Mai
Unit of Environmental Science & Technology, School of Chemical Engineering, National Technical University of Athens, Zographou Campus, 9 Iroon Polytechniou Str., 15780 Athens, Greece
2 shared publications
Latest Publications
- Open Access
From Microalgae to Biofuels: Investigating Valorization Pathways Towards Biorefinery Integration
The rapid growth of the world population led to an exponential growth in industrial activity all around the world. Consequently, CO2 emissions have risen almost 400% since 1950 due to human activities. In this context, microalgae biomass has emerged as a renewable and sustainable feedstock for producing third-generation biofuels. This study explores the laboratory-scale production of bioethanol and biomethane from dried algal biomass. The first step was to evaluate and optimize the production of glucose from the biomass. Thus, three different techniques with three different solvents were tested to identify the most effective and efficient in terms of saccharification yield. With the assistance of an autoclave or a high-temperature water bath and 0.2 M NaOH as a solvent, yields of 79.16 ± 3.03% and 85.73 ± 3.23% were achieved which correspond to 9.24 and 9.80 g/L of glucose, respectively. Furthermore, the most efficient method from the pretreatment step was chosen to carry out a factorial design to produce bioethanol. The experiments showed that the loading of cellulase was of crucial importance to the optimization of the process. Optimized ethanolic fermentation yielded ethanol concentrations up to 4.40 ± 0.28 g/L (76.12 ± 4.90%) (0.3 Μ NaOH, 750 μL/gcellulose and 65 μL/gstarch), demonstrating the critical role of cellulase loading. Biomethane potential (BMP) assays on fermentation residues showed increased yields compared to untreated feedstock, with a maximum methane yield of 217.88 ± 10.40 mL/gVS. Combined energy production from bioethanol and biomethane was calculated at up to 1044.48 kWh/tn of algae feedstock, with biomethane contributing 75.26% to the total output. These findings highlight the potential of integrated algae-based biorefineries to provide scalable and sustainable biofuel solutions, aligning with circular economy principles.
Open AccessFrom Microalgae to Biofuels: Investigating Valorization Pathways Towards Biorefinery Integration
The rapid growth of the world population led to an exponential growth in industrial activity all around the world. Consequently, CO2 emissions have risen almost 400% since 1950 due to human activities. In this context, microalgae biomass has emerged as a renewable and sustainable feedstock for producing third-generation biofuels. This study explores the laboratory-scale production of bioethanol and biomethane from dried algal biomass. The first step was to evaluate and optimize the production of glucose from the biomass. Thus, three different techniques with three different solvents were tested to identify the most effective and efficient in terms of saccharification yield. With the assistance of an autoclave or a high-temperature water bath and 0.2 M NaOH as a solvent, yields of 79.16 ± 3.03% and 85.73 ± 3.23% were achieved which correspond to 9.24 and 9.80 g/L of glucose, respectively. Furthermore, the most efficient method from the pretreatment step was chosen to carry out a factorial design to produce bioethanol. The experiments showed that the loading of cellulase was of crucial importance to the optimization of the process. Optimized ethanolic fermentation yielded ethanol concentrations up to 4.40 ± 0.28 g/L (76.12 ± 4.90%) (0.3 Μ NaOH, 750 μL/gcellulose and 65 μL/gstarch), demonstrating the critical role of cellulase loading. Biomethane potential (BMP) assays on fermentation residues showed increased yields compared to untreated feedstock, with a maximum methane yield of 217.88 ± 10.40 mL/gVS. Combined energy production from bioethanol and biomethane was calculated at up to 1044.48 kWh/tn of algae feedstock, with biomethane contributing 75.26% to the total output. These findings highlight the potential of integrated algae-based biorefineries to provide scalable and sustainable biofuel solutions, aligning with circular economy principles.
- Open Access
- 26 November 2024
- Published by MDPI AG in Preprints.org
From Microalgae to Biofuels: Investigating Valorization Pathways Towards Biorefinery Integration
The rapid growth of the world population led to an exponential growth in industrial activity all around the world. Consequently, CO2 emissions have risen almost 400% since 1950 due to human activities. Considering that microalgae biomass is recognized as a renewable feedstock to produce third generation biofuels and bioenergy, the scope of the present research was to investigate al-ternative routes to produce bioethanol and biomethane in laboratory scale from dried algae biomass. The first step was to evaluate and optimize the production of sugars from the received biomass. Thus, three different techniques with three different solvents were tested to identify the most ef-fective and efficient in terms of saccharification yield. With the assistance of an autoclave or a high temperature water bath and 0.2M NaOH as a solvent, yields of 79.16 ± 3.03% and 85.73 ± 3.23% were achieved which correspond to 9.24 and 9.80 g/L of glucose respectively. Furthermore, the most efficient method from the pretreatment step was chosen to carry out a factorial design to produce bioethanol. The experiments showed that the loading of cellulase was of crucial importance to the optimization of the process. Regarding the ethanol yields obtained, the highest was 76.12 ± 4.90% with a concentration of 4.40 ± 0.28 g/L (0.3 Μ NaOH, 750 μL/gcellulose and 65 μL/gstarch). In addition, the stillages derived from the fermentation broth were assessed through a BMP test to evaluate their biomethane potential. They exhibited increased biomethane yields in comparison with the untreated feedstock. The highest methane yield recorded was 217.88 ± 10.40 mL/gVS. Finally, the energy that could be produced if both products (bioethanol and biomethane) were valorized, was evaluated. The analysis showed that up to 1044.48 kWh/tn of algae feedstock could be produced, with the biomethane production contributing 75.26% to the total energy output.
- 26 November 2024
- Published by MDPI AG in Preprints.org
Open AccessFrom Microalgae to Biofuels: Investigating Valorization Pathways Towards Biorefinery Integration
The rapid growth of the world population led to an exponential growth in industrial activity all around the world. Consequently, CO2 emissions have risen almost 400% since 1950 due to human activities. Considering that microalgae biomass is recognized as a renewable feedstock to produce third generation biofuels and bioenergy, the scope of the present research was to investigate al-ternative routes to produce bioethanol and biomethane in laboratory scale from dried algae biomass. The first step was to evaluate and optimize the production of sugars from the received biomass. Thus, three different techniques with three different solvents were tested to identify the most ef-fective and efficient in terms of saccharification yield. With the assistance of an autoclave or a high temperature water bath and 0.2M NaOH as a solvent, yields of 79.16 ± 3.03% and 85.73 ± 3.23% were achieved which correspond to 9.24 and 9.80 g/L of glucose respectively. Furthermore, the most efficient method from the pretreatment step was chosen to carry out a factorial design to produce bioethanol. The experiments showed that the loading of cellulase was of crucial importance to the optimization of the process. Regarding the ethanol yields obtained, the highest was 76.12 ± 4.90% with a concentration of 4.40 ± 0.28 g/L (0.3 Μ NaOH, 750 μL/gcellulose and 65 μL/gstarch). In addition, the stillages derived from the fermentation broth were assessed through a BMP test to evaluate their biomethane potential. They exhibited increased biomethane yields in comparison with the untreated feedstock. The highest methane yield recorded was 217.88 ± 10.40 mL/gVS. Finally, the energy that could be produced if both products (bioethanol and biomethane) were valorized, was evaluated. The analysis showed that up to 1044.48 kWh/tn of algae feedstock could be produced, with the biomethane production contributing 75.26% to the total energy output.