Hao Qin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hao Qin has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Enjin Zhao
College of Marine Science and Technology, China University of Geosciences, Wuhan, China
5 shared publications - Lin Mu
College of Life Sciences and Oceanography, Shenzhen University, Shenzhen, 518055, China
4 shared publications Haowen Su
China University of Geosciences
2 shared publicationsHongjian Liang
China University of Geosciences
2 shared publications- Kui Zhu
Naval University of Engineering, Wuhan, China
2 shared publications - Runxiang Jiang
College of Electrical Engineering, Naval University of Engineering, Wuhan 430033, China
2 shared publications
Latest Publications
- Open Access
- 1 December 2025
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 25 (12) , 4767-4786
Effective storm surge risk assessment and deep reinforcement learning based evacuation planning: a case study of Daya Bay Petrochemical Industrial Zone
Storm surge is one of the most destructive marine disasters, characterized by abnormal and temporary rises in water levels during intense storms, leading to extreme inland flooding in the coastal area. storm surge risk assessment and evacuation planning, play a crucial role in saving lives and mitigating disasters. Conventional risk assessment struggles to meet the demands of refined risk evaluation research for small-scale elements, such as roads, and current evacuation plans are generally based on broader regional scales, failing to provide effective road-level evacuation planning for evacuees. This study developed five typical typhoon scenarios for the coupled ADCIRC-SWAN model to simulate storm surge inundation. Combining these simulations with road network, storm surge risk assessment was conducted in the Daya Bay Petrochemical Industrial Zone, a vulnerable low-lying coastal region of Huizhou City, China. Based on the risk assessment, a combination of the Deep Q-Network (DQN) model and raster environment was employed to develop real-time evacuation plans during storm surge events. To address the DQN model's convergence challenges, compressed search space and navigational reward methods were proposed. 1000 starting points were randomly selected for route planning, and the results indicate that the proposed method is highly effective in devising optimal evacuation routes with minimal deviation, offering valuable guidance for evacuees during real-world storm surges.
- 1 December 2025
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 25 (12) , 4767-4786
Open AccessEffective storm surge risk assessment and deep reinforcement learning based evacuation planning: a case study of Daya Bay Petrochemical Industrial Zone
Storm surge is one of the most destructive marine disasters, characterized by abnormal and temporary rises in water levels during intense storms, leading to extreme inland flooding in the coastal area. storm surge risk assessment and evacuation planning, play a crucial role in saving lives and mitigating disasters. Conventional risk assessment struggles to meet the demands of refined risk evaluation research for small-scale elements, such as roads, and current evacuation plans are generally based on broader regional scales, failing to provide effective road-level evacuation planning for evacuees. This study developed five typical typhoon scenarios for the coupled ADCIRC-SWAN model to simulate storm surge inundation. Combining these simulations with road network, storm surge risk assessment was conducted in the Daya Bay Petrochemical Industrial Zone, a vulnerable low-lying coastal region of Huizhou City, China. Based on the risk assessment, a combination of the Deep Q-Network (DQN) model and raster environment was employed to develop real-time evacuation plans during storm surge events. To address the DQN model's convergence challenges, compressed search space and navigational reward methods were proposed. 1000 starting points were randomly selected for route planning, and the results indicate that the proposed method is highly effective in devising optimal evacuation routes with minimal deviation, offering valuable guidance for evacuees during real-world storm surges.
- 22 October 2025
- Published by Springer Nature
- p. 36-58
A DRL Control Model for Wave Energy Capture in the CFD-Based Wave-Structure Interaction Environment
- 22 October 2025
- Published by Springer Nature
- p. 36-58
A DRL Control Model for Wave Energy Capture in the CFD-Based Wave-Structure Interaction Environment
- Open Access
- 28 July 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (8) , 1443
Mooring Evaluation of a Floating Offshore Wind Turbine Platform Under Rogue Wave Conditions Using a Coupled CFD-FEM Model
As the development of offshore wind energy transforms from coastal to deep-sea regions, designing a cost effective mooring system while ensuring the safety of floating offshore wind turbine (FOWT) remains a critical challenge, especially considering extreme wave environments. This study employs a model coupling computational fluid dynamics (CFD) and finite element method (FEM) to investigate the responses of a parked FOWT platform with its mooring system under rogue wave conditions. Specifically, the mooring dynamics are solved using a local discontinuous Galerkin (LDG) method, which is believed to provide high accuracy. Firstly, rogue wave generation and the coupled CFD-FEM are validated through comparisons with existing experimental and numerical data. Secondly, FOWT platform motions and mooring tensions caused by a rogue wave are obtained through simulations, which are compared with the ones caused by a similar peak-clipped rogue wave. Lastly, analysis of four different mooring design schemes is conducted to evaluate their performance on reducing the mooring tensions. The results indicate that the rogue wave leads to significantly enlarged FOWT platform motions and mooring tensions, while doubling the number of mooring lines with specific line angles provides the most balanced performance considering cost-effectiveness and structural safety under identical rogue wave conditions.
- 28 July 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (8) , 1443
Open AccessMooring Evaluation of a Floating Offshore Wind Turbine Platform Under Rogue Wave Conditions Using a Coupled CFD-FEM Model
As the development of offshore wind energy transforms from coastal to deep-sea regions, designing a cost effective mooring system while ensuring the safety of floating offshore wind turbine (FOWT) remains a critical challenge, especially considering extreme wave environments. This study employs a model coupling computational fluid dynamics (CFD) and finite element method (FEM) to investigate the responses of a parked FOWT platform with its mooring system under rogue wave conditions. Specifically, the mooring dynamics are solved using a local discontinuous Galerkin (LDG) method, which is believed to provide high accuracy. Firstly, rogue wave generation and the coupled CFD-FEM are validated through comparisons with existing experimental and numerical data. Secondly, FOWT platform motions and mooring tensions caused by a rogue wave are obtained through simulations, which are compared with the ones caused by a similar peak-clipped rogue wave. Lastly, analysis of four different mooring design schemes is conducted to evaluate their performance on reducing the mooring tensions. The results indicate that the rogue wave leads to significantly enlarged FOWT platform motions and mooring tensions, while doubling the number of mooring lines with specific line angles provides the most balanced performance considering cost-effectiveness and structural safety under identical rogue wave conditions.
- Open Access
- 12 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (9) , 1625
Numerical Simulation and On-Site Measurement of Dynamic Response of Flexible Marine Aquaculture Cages
Flexible cages are widely used in marine aquaculture, yet their mechanical features in extreme seas are still unclear. This study proposes a numerical algorithm to solve the coupled response of the multiple cage systems. The net and mooring lines are modeled using the lumped-mass model, while the flexible floating collar system is assessed with the large-deformation FEM model, and the two models are coupled through an iterative scheme. Sea trials are conducted, and the motion of the cage is obtained using an image processing technique, which validates the numerical algorithm. Using the proposed numerical algorithm, a series of simulations are performed to investigate the response of flexible cages in extreme seas. Motions, line tensions, and structural sectional forces are studied, and the effects of factors such as the wavelength of incident waves and the diameter of collar pipes are investigated.
- 12 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (9) , 1625
Open AccessNumerical Simulation and On-Site Measurement of Dynamic Response of Flexible Marine Aquaculture Cages
Flexible cages are widely used in marine aquaculture, yet their mechanical features in extreme seas are still unclear. This study proposes a numerical algorithm to solve the coupled response of the multiple cage systems. The net and mooring lines are modeled using the lumped-mass model, while the flexible floating collar system is assessed with the large-deformation FEM model, and the two models are coupled through an iterative scheme. Sea trials are conducted, and the motion of the cage is obtained using an image processing technique, which validates the numerical algorithm. Using the proposed numerical algorithm, a series of simulations are performed to investigate the response of flexible cages in extreme seas. Motions, line tensions, and structural sectional forces are studied, and the effects of factors such as the wavelength of incident waves and the diameter of collar pipes are investigated.
- Open Access
- 22 August 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (16) , 3092
Wavelength Cut-Off Error of Spectral Density from MTF3 of SWIM Instrument Onboard CFOSAT: An Investigation from Buoy Data
The Surface Waves Investigation and Monitoring instrument (SWIM) provides the directional wave spectrum within the wavelength range of 23–500 m, corresponding to a frequency range of 0.056–0.26 Hz in deep water. This frequency range is narrower than the 0.02–0.485 Hz frequency range of buoys used to validate the SWIM nadir Significant Wave Height (SWH). The modulation transfer function used in the current version of the SWIM data product normalizes the energy of the wave spectrum using the nadir SWH. A discrepancy in the cut-off frequency/wavelength ranges between the nadir and off-nadir beams can lead to an overestimation of off-nadir cut-off SWHs and, consequently, the spectral densities of SWIM wave spectra. This study investigates such errors in SWHs due to the wavelength cut-off effect using buoy data. Results show that this wavelength cut-off error of SWH is small in general thanks to the high-frequency extension of the resolved frequency range. The corresponding high-frequency cut-off errors are systematic errors amenable to statistical correction, and the low-frequency cut-off error can be significant under swell-dominated conditions. By leveraging the properties of these errors, we successfully corrected the high-frequency cut-off SWH error using an artificial neural network and mitigated the low-frequency cut-off SWH error with the help of a numerical wave hindcast. These corrections significantly reduced the error in the estimated cut-off SWH, improving the bias, root-mean-square error, and correlation coefficient from 0.086 m, 0.111 m, and 0.9976 to 0 m, 0.039 m, and 0.9994, respectively.
- 22 August 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (16) , 3092
Open AccessWavelength Cut-Off Error of Spectral Density from MTF3 of SWIM Instrument Onboard CFOSAT: An Investigation from Buoy Data
The Surface Waves Investigation and Monitoring instrument (SWIM) provides the directional wave spectrum within the wavelength range of 23–500 m, corresponding to a frequency range of 0.056–0.26 Hz in deep water. This frequency range is narrower than the 0.02–0.485 Hz frequency range of buoys used to validate the SWIM nadir Significant Wave Height (SWH). The modulation transfer function used in the current version of the SWIM data product normalizes the energy of the wave spectrum using the nadir SWH. A discrepancy in the cut-off frequency/wavelength ranges between the nadir and off-nadir beams can lead to an overestimation of off-nadir cut-off SWHs and, consequently, the spectral densities of SWIM wave spectra. This study investigates such errors in SWHs due to the wavelength cut-off effect using buoy data. Results show that this wavelength cut-off error of SWH is small in general thanks to the high-frequency extension of the resolved frequency range. The corresponding high-frequency cut-off errors are systematic errors amenable to statistical correction, and the low-frequency cut-off error can be significant under swell-dominated conditions. By leveraging the properties of these errors, we successfully corrected the high-frequency cut-off SWH error using an artificial neural network and mitigated the low-frequency cut-off SWH error with the help of a numerical wave hindcast. These corrections significantly reduced the error in the estimated cut-off SWH, improving the bias, root-mean-square error, and correlation coefficient from 0.086 m, 0.111 m, and 0.9976 to 0 m, 0.039 m, and 0.9994, respectively.
- Open Access
- 5 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (13) , 7875
Special Issue on Advances in Applied Marine Sciences and Engineering
Marine Science and technology are the basis for human beings to understand, develop and protect the ocean
- 5 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (13) , 7875
Open AccessSpecial Issue on Advances in Applied Marine Sciences and Engineering
Marine Science and technology are the basis for human beings to understand, develop and protect the ocean
- Open Access
- 2 June 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (11) , 6791
Numerical Study on the Green-Water Loads and Structural Responses of Ship Bow Structures Caused by Freak Waves
In recent decades, freak waves, characterized by their unusual high amplitude, sharp crest, and concentrated energy, have attracted researchers’ attention due to their potential threat to marine structures. Green-water loads caused by freak waves can be significant and may lead to local damage to the ship structures. Therefore, this paper focuses on the study of green-water loads and examines the structural responses of ship bow structures under the influence of the green-water loads caused by freak waves. Firstly, a three-dimensional numerical wave tank is established in which the superposition model is used to generate freak waves. Validations on the freak-wave generation, ship motion response and the wave loading are carried out to verify the present solvers. The simulation on the interaction between the freak wave and the ship are conducted to obtain the interaction process and green-water loads. Secondly, a finite element (FEM) model of the ship bow is built, on which the green-water loads are applied to calculate the structural responses. Finally, the displacement and stress of the deck and breakwater structures are analyzed. It is found that green water events caused by freak waves can generate enormous impact forces on the bow deck and breakwater, resulting in severe structural responses and even possible damage to the structures. The local strength of structures under freak waves needs to be considered in practical engineering applications.
- 2 June 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (11) , 6791
Open AccessNumerical Study on the Green-Water Loads and Structural Responses of Ship Bow Structures Caused by Freak Waves
In recent decades, freak waves, characterized by their unusual high amplitude, sharp crest, and concentrated energy, have attracted researchers’ attention due to their potential threat to marine structures. Green-water loads caused by freak waves can be significant and may lead to local damage to the ship structures. Therefore, this paper focuses on the study of green-water loads and examines the structural responses of ship bow structures under the influence of the green-water loads caused by freak waves. Firstly, a three-dimensional numerical wave tank is established in which the superposition model is used to generate freak waves. Validations on the freak-wave generation, ship motion response and the wave loading are carried out to verify the present solvers. The simulation on the interaction between the freak wave and the ship are conducted to obtain the interaction process and green-water loads. Secondly, a finite element (FEM) model of the ship bow is built, on which the green-water loads are applied to calculate the structural responses. Finally, the displacement and stress of the deck and breakwater structures are analyzed. It is found that green water events caused by freak waves can generate enormous impact forces on the bow deck and breakwater, resulting in severe structural responses and even possible damage to the structures. The local strength of structures under freak waves needs to be considered in practical engineering applications.
- Open Access
- 7 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (3) , 565
Numerical Study on the Effects of the Multiple Porous Medium Breakwaters on the Propagation of the Solitary Wave
Submerged breakwater, as an important marine engineering structure, can effectively absorb wave energy and is widely used in marine engineering protection. As a new type of breakwater, porous medium breakwater has a certain influence on wave propagation. However, the influence of multiple porous medium submerged breakwaters on extreme waves remains to be studied. In the study, considering effects of extreme waves generated by hurricanes or tsunamis, the influence of the solitary wave on the multiple semi-circle porous medium breakwater is systematically investigated. According to the computational fluid dynamics theory, a numerical tank is established, in which the porous medium module is coupled. The computational capability of this model is verified first. Then, depending on the model, a series of cases are carried out to study the effects of different porous medium breakwaters on the propagation of the solitary wave. The results show that when the porosity is 0.8, the force on the submerged breakwaters is the smallest, and the water level and the velocity decrease seriously. With the increase in the diameter of the submerged breakwater, the wave profile gradually becomes flat. The higher the wave height, the more serious the wave deformation after passing through the submerged breakwater.
- 7 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (3) , 565
Open AccessNumerical Study on the Effects of the Multiple Porous Medium Breakwaters on the Propagation of the Solitary Wave
Submerged breakwater, as an important marine engineering structure, can effectively absorb wave energy and is widely used in marine engineering protection. As a new type of breakwater, porous medium breakwater has a certain influence on wave propagation. However, the influence of multiple porous medium submerged breakwaters on extreme waves remains to be studied. In the study, considering effects of extreme waves generated by hurricanes or tsunamis, the influence of the solitary wave on the multiple semi-circle porous medium breakwater is systematically investigated. According to the computational fluid dynamics theory, a numerical tank is established, in which the porous medium module is coupled. The computational capability of this model is verified first. Then, depending on the model, a series of cases are carried out to study the effects of different porous medium breakwaters on the propagation of the solitary wave. The results show that when the porosity is 0.8, the force on the submerged breakwaters is the smallest, and the water level and the velocity decrease seriously. With the increase in the diameter of the submerged breakwater, the wave profile gradually becomes flat. The higher the wave height, the more serious the wave deformation after passing through the submerged breakwater.
- Open Access
- 26 February 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (5) , 3011
Numerical Investigation on the Influence of Breakwater and the Sediment Transport in Shantou Offshore Area
The coastline of Shantou is tortuous, while the hydrodynamic environment is complicated. In this paper, the hydrodynamic model is established by the FVCOM (Finite Volume Coastal Ocean Model); the open boundary conditions such as water level, river, and wind field are the input; and the model is verified by tidal harmonic function. According to the previous research, the typhoon wind field with a 10-year return period is selected for storm surge simulation. When there is a bank, the accumulated water on the land cannot enter the ocean due to the block of the bank but accumulates on the inner side of the bank, resulting in higher accumulated water, but less than 0.5 m. In the aspect of sediment deposition, a sediment transport model is established to analyze the sediment deposition in Shantou Port and its surrounding waters. Some reasonable suggestions are put forward for the sediment deposition in Shantou. According to the simulation results, the following conclusions can be drawn: (1) In the case of typhoon storm surge in the return period of 10 years, the bank can effectively protect the inland. Still, accumulated water will collect near the bank. (2) The offshore water level will rise by 0.4 m after adding a bank. (3) The sediment in Shantou Bay mainly comes from the ocean sediment caused by tides, and the largest sedimentation occurs in the main channel.
- 26 February 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (5) , 3011
Open AccessNumerical Investigation on the Influence of Breakwater and the Sediment Transport in Shantou Offshore Area
The coastline of Shantou is tortuous, while the hydrodynamic environment is complicated. In this paper, the hydrodynamic model is established by the FVCOM (Finite Volume Coastal Ocean Model); the open boundary conditions such as water level, river, and wind field are the input; and the model is verified by tidal harmonic function. According to the previous research, the typhoon wind field with a 10-year return period is selected for storm surge simulation. When there is a bank, the accumulated water on the land cannot enter the ocean due to the block of the bank but accumulates on the inner side of the bank, resulting in higher accumulated water, but less than 0.5 m. In the aspect of sediment deposition, a sediment transport model is established to analyze the sediment deposition in Shantou Port and its surrounding waters. Some reasonable suggestions are put forward for the sediment deposition in Shantou. According to the simulation results, the following conclusions can be drawn: (1) In the case of typhoon storm surge in the return period of 10 years, the bank can effectively protect the inland. Still, accumulated water will collect near the bank. (2) The offshore water level will rise by 0.4 m after adding a bank. (3) The sediment in Shantou Bay mainly comes from the ocean sediment caused by tides, and the largest sedimentation occurs in the main channel.
- Open Access
- 8 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 98290-98308
A Model Coupling CFD and DRL: Investigation on Wave Dissipation by Actively Controlled Flat Plate
In order to protect structures along the offshore and off the coast, breakwaters are commonly applied to reduce the influence of waves. Flat plate breakwater is studied frequently due to its great performance near the water surface, however, traditional passive methods such as fixed and floating flat plate breakwaters usually fail to give full play of effective wave dissipation when encountering variable unknown incoming waves. Therefore, this paper develops an interdisciplinary model coupling computational fluid dynamics (CFD) and deep reinforcement learning (DRL) to study the wave dissipation of a submerged movable flat plate breakwater against regular waves. An in-house numerical wave tank (NWT) is built to simulate the fluid-structure interaction between the plate and regular waves. The fluid domain in NWT is regarded as environment while the flat plate breakwater is agent. In addition, the wave dissipation strategy is learned by the artificial neural network (ANN) through the continuous wave-plate interaction. It is excited to find that the coupling model is able to learn the control strategies automatically and exhibits good adaptability to the changes of environment.
- 8 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 98290-98308
Open AccessA Model Coupling CFD and DRL: Investigation on Wave Dissipation by Actively Controlled Flat Plate
In order to protect structures along the offshore and off the coast, breakwaters are commonly applied to reduce the influence of waves. Flat plate breakwater is studied frequently due to its great performance near the water surface, however, traditional passive methods such as fixed and floating flat plate breakwaters usually fail to give full play of effective wave dissipation when encountering variable unknown incoming waves. Therefore, this paper develops an interdisciplinary model coupling computational fluid dynamics (CFD) and deep reinforcement learning (DRL) to study the wave dissipation of a submerged movable flat plate breakwater against regular waves. An in-house numerical wave tank (NWT) is built to simulate the fluid-structure interaction between the plate and regular waves. The fluid domain in NWT is regarded as environment while the flat plate breakwater is agent. In addition, the wave dissipation strategy is learned by the artificial neural network (ANN) through the continuous wave-plate interaction. It is excited to find that the coupling model is able to learn the control strategies automatically and exhibits good adaptability to the changes of environment.