Sridhar Kannan
Sridhar Kannan has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Ashish Kumar Singh
Department of Orthodontics and Dentofacial Orthopedics, Manav Rachna Dental College, Manav Rachna International Institute of Research and Studies, Faridabad, Haryana, India
2 shared publications - Abhita Malhotra
Manav Rachna Dental College, Manav Rachna International Institute of Research and Studies (MRIIRS), Faridabad, Haryana, India
1 shared publication - Aditya Talwar
Department of Orthodontics and Dentofacial Orthopaedics Manav Rachna Dental College, MRIIRS Faridabad India
1 shared publication - Amit Vasant Mahuli
Public Health Dentistry and Preventive Dentistry, Dental College, Rajendra Institute of Medical Sciences, Ranchi, IND
1 shared publication - Anita Parushetti
Malla Reddy Institute of Dental Sciences
1 shared publication - Anka Sharma
Department of Oral Medicine and Radiology Ranjeet Deshmukh Dental College and Research Centre Nagpur Maharashtra India
1 shared publication
Latest Publications
- Open Access
- 3 May 2025
- Published by Universidade Estadual de Campinas in Brazilian Journal of Oral Sciences
- Vol. 24, e254954
Performance of ChatGPT in dentistry
Artificial Intelligence-based language model, ChatGPT, has gained significant traction due to its communicative interface and the relevance of the responses generated. This tool exhibits tremendous potential to be utilized in dentistry for dental education, and possibly as a clinical decision support system. Hence, it is imperative to evaluate the accuracy of the model in relation to the responses generated for dental-related queries and outline the limitations for its use in clinical practice. This study aims to evaluate the performance of ChatGPT-generated responses to questions from multiple dental specialties for their accuracy, completeness, and relevance. Methods: This multi-centric study involved 27 subject experts from nine dental specialties of various institutions and 2 heads of institutions. A total of 243 questions were formulated and the answers generated by ChatGPT (version: 3.5) were rated in terms of accuracy (6-point Likert), completeness (4-point Likert), and relevance (5-point Likert). Results: The mean accuracy of the ChatGPT-generated answers was 4.61 (SD 1.575), with a median of 5.33. For completeness, the mean score was 2.01 (SD 0.793), and the median was 2.33. Regarding relevance, a mean of 3.13 (SD 1.590) and a median of 3.67 were obtained. The highest ratings were observed for answers related to Oral Medicine and Radiology, as well as for open-ended questions, and questions labelled as easy in terms of difficulty. Conclusion: The promising results observed in the study promote the application of ChatGPT for retrieving dental information. However, it is crucial to exercise caution and seek advice from a qualified healthcare for dental health-related queries. Further large-scale testing of the model is necessary before incorporating it into dental clinical practice.
- 3 May 2025
- Published by Universidade Estadual de Campinas in Brazilian Journal of Oral Sciences
- Vol. 24, e254954
Open AccessPerformance of ChatGPT in dentistry
Artificial Intelligence-based language model, ChatGPT, has gained significant traction due to its communicative interface and the relevance of the responses generated. This tool exhibits tremendous potential to be utilized in dentistry for dental education, and possibly as a clinical decision support system. Hence, it is imperative to evaluate the accuracy of the model in relation to the responses generated for dental-related queries and outline the limitations for its use in clinical practice. This study aims to evaluate the performance of ChatGPT-generated responses to questions from multiple dental specialties for their accuracy, completeness, and relevance. Methods: This multi-centric study involved 27 subject experts from nine dental specialties of various institutions and 2 heads of institutions. A total of 243 questions were formulated and the answers generated by ChatGPT (version: 3.5) were rated in terms of accuracy (6-point Likert), completeness (4-point Likert), and relevance (5-point Likert). Results: The mean accuracy of the ChatGPT-generated answers was 4.61 (SD 1.575), with a median of 5.33. For completeness, the mean score was 2.01 (SD 0.793), and the median was 2.33. Regarding relevance, a mean of 3.13 (SD 1.590) and a median of 3.67 were obtained. The highest ratings were observed for answers related to Oral Medicine and Radiology, as well as for open-ended questions, and questions labelled as easy in terms of difficulty. Conclusion: The promising results observed in the study promote the application of ChatGPT for retrieving dental information. However, it is crucial to exercise caution and seek advice from a qualified healthcare for dental health-related queries. Further large-scale testing of the model is necessary before incorporating it into dental clinical practice.
- Open Access
- 1 July 2024
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 37 (2) , 122-129
Effect of Aligning Forces by Two Preadjusted Edgewise Techniques on a Buccally Positioned Maxillary Canine at Varying Vertical Displacements: A Finite Element Study
Objective: To evaluate the effect of continuous arch and piggyback mechanics in a straight wire appliance (SWA) for the alignment of buccal and variably vertically positioned maxillary canines. Methods: A three-dimensional finite element model with near-normal occlusion and buccal and vertically displaced maxillary canines was used. Two groups were created to simulate two commonly used SWAs techniques, continuous archwire (Group 1) and piggyback models (Group 2). Each group had three subgroups with varying vertical displacement of the canine from 2 to 6 mm from the occlusal plane. The displacement and stress distribution were noted in each group. Results: As the vertical displacement increased in Group 1, the concentration of von Mises stress increased progressively at the incisal third (0.36, 0.41 and 0.44 MPa) at 2, 4, and 6 mm, respectively, with decreased maximum occlusal movement in the vertical plane with respect to the canine. Group 2 exhibited a similar pattern but greater occlusal movement of the canine compared with Group 1. Conclusion: A vertical displacement of 4 mm is the optimal level at which continuous arch mechanics should be considered. For displacements beyond 4 mm, the piggyback wire technique is a suitable alternative.
- 1 July 2024
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 37 (2) , 122-129
Open AccessEffect of Aligning Forces by Two Preadjusted Edgewise Techniques on a Buccally Positioned Maxillary Canine at Varying Vertical Displacements: A Finite Element Study
Objective: To evaluate the effect of continuous arch and piggyback mechanics in a straight wire appliance (SWA) for the alignment of buccal and variably vertically positioned maxillary canines. Methods: A three-dimensional finite element model with near-normal occlusion and buccal and vertically displaced maxillary canines was used. Two groups were created to simulate two commonly used SWAs techniques, continuous archwire (Group 1) and piggyback models (Group 2). Each group had three subgroups with varying vertical displacement of the canine from 2 to 6 mm from the occlusal plane. The displacement and stress distribution were noted in each group. Results: As the vertical displacement increased in Group 1, the concentration of von Mises stress increased progressively at the incisal third (0.36, 0.41 and 0.44 MPa) at 2, 4, and 6 mm, respectively, with decreased maximum occlusal movement in the vertical plane with respect to the canine. Group 2 exhibited a similar pattern but greater occlusal movement of the canine compared with Group 1. Conclusion: A vertical displacement of 4 mm is the optimal level at which continuous arch mechanics should be considered. For displacements beyond 4 mm, the piggyback wire technique is a suitable alternative.
- 1 January 2021
- Published by Medknow in International Journal of Orthodontic Rehabilitation
- Vol. 12 (1) , 19-25
Influence of smile and facial angulations on facial attractiveness: Perceptions of laypersons, dentists and orthodontists
Objective: To evaluate the facial profile view perceived as most attractive and whether this attractiveness was influenced in a neutral and smiling face. Methodology: Sixty participants (20 each of laypersons, dentists, and orthodontists) were chosen for the study. Their facial photos were taken along with professional models' with normal occlusion. Participants were asked to rate self and model photos using the Visual Analog Scale (VAS) based on attractiveness; select most attractive face by looking at panels with 0°, 30°, 45°, 60°, and 90° rotated facial photos of neutral and smiling for models and self; select most attractive photo from the combination panels of neutral and smiling photos of self and model. Results: VAS scores by orthodontists for both neutral and smiling faces for both self and model were more or less similar. Dentists and laypersons found smiling photographs more attractive. The 45 angle was perceived most attractive in self and model for both the neutral and smiling categories separately by all three groups. In the combination category, orthodontist perceived the 0° smiling (model) as the most attractive followed by 45° smiling, whereas dentists and laypersons found 45° smiling photographs most attractive. Conclusion: The 45° profile view was most preferred by all three groups when assessing self as well as models. Smiling photographs of both self and model are considered more attractive than neutral photographs.
- 1 January 2021
- Published by Medknow in International Journal of Orthodontic Rehabilitation
- Vol. 12 (1) , 19-25
Influence of smile and facial angulations on facial attractiveness: Perceptions of laypersons, dentists and orthodontists
Objective: To evaluate the facial profile view perceived as most attractive and whether this attractiveness was influenced in a neutral and smiling face. Methodology: Sixty participants (20 each of laypersons, dentists, and orthodontists) were chosen for the study. Their facial photos were taken along with professional models' with normal occlusion. Participants were asked to rate self and model photos using the Visual Analog Scale (VAS) based on attractiveness; select most attractive face by looking at panels with 0°, 30°, 45°, 60°, and 90° rotated facial photos of neutral and smiling for models and self; select most attractive photo from the combination panels of neutral and smiling photos of self and model. Results: VAS scores by orthodontists for both neutral and smiling faces for both self and model were more or less similar. Dentists and laypersons found smiling photographs more attractive. The 45 angle was perceived most attractive in self and model for both the neutral and smiling categories separately by all three groups. In the combination category, orthodontist perceived the 0° smiling (model) as the most attractive followed by 45° smiling, whereas dentists and laypersons found 45° smiling photographs most attractive. Conclusion: The 45° profile view was most preferred by all three groups when assessing self as well as models. Smiling photographs of both self and model are considered more attractive than neutral photographs.