Sajid Hossain has a total of 89 co-authors. Here are the top co-authors by number of shared publications:

  • Abu Shufian

    American International University-Bangladesh,Dept. of Electrical and Electronic Engineering,Dhaka,Bangladesh

    6 shared publications
  • Durjoy Roy Dipto

    American International University-Bangladesh,Dept. of Electrical Electronic Engg.,Dhaka,Bangladesh

    3 shared publications
  • Rinku Basak

    3 shared publications
  • Shameem Ahmad

    American International University-Bangladesh,Electrical and Electronic Engineering,Dhaka,Bangladesh,1229

    3 shared publications
  • Sowrov Komar Shib

    American International University-Bangladesh,Dept. of Electrical Electronic Engg.,Dhaka,Bangladesh

    3 shared publications
  • Tanvir Rahman

    American International University-Bangladesh,Dept. of Electrical Electronic Engg.,Dhaka,Bangladesh

    3 shared publications

Latest Publications

  • Sustainable Water Quality Monitoring for Efficient Industrial Water Management

    by Shusmita Anjum Aziz, Tasnia Ahmed, Progga Patowary, Kamruzzamn Jubo, Gazi Korbanul Islam, Sajid Hossain

    The rapid growth of industrialization has led to significant environmental pollution, particularly due to the discharge of untreated wastewater into rivers. This paper presented a microcontroller-based system designed to monitor and manage industrial effluents efficiently. The system incorporated pH, total dissolved solids (TDS), and temperature sensors to assess water quality and used solenoid valves controlled via a relay module to regulate water flow. When the pollution levels exceeded predefined thresholds, the system automatically diverted the contaminated water to a storage unit for recycling. If the water quality remained within acceptable limits, it was either released into natural water bodies or stored for future use. The prototype was tested using both clean and artificially polluted water samples, and in both cases, the system demonstrated accurate sensor readings and reliable valve control. Although the current version did not include a turbidity sensor, which would further enhance the detection of suspended particles, future improvements aimed to integrate this feature along with a purification mechanism for the stored water. Additionally, the system’s modularity and real-time operation make it adaptable to various industrial settings. This project offered a low-cost, automated, and scalable solution to help reduce water pollution, support better water resource management, and promote compliance with environmental regulations, making it particularly beneficial for industries aiming to implement sustainable wastewater management.

  • Intelligent Power Harvesting in Grid-tied PV Systems Using Adaptive Grey Wolf Optimization Based MPPT Control Under Partial Shading Conditions

    by Nasif Hannan, Tashawar Muhammad Rasha, Debashish Kumar Ghosh, Ismail Hossain, Abu Shufian, Sajid Hossain

    In this paper, a Grey Wolf Optimization (GWO)-based Maximum Power Point Tracking (MPPT) controller is proposed for real-time power optimization in a residential on-grid photovoltaic (PV) system. The developed approach addresses the challenges posed by partial shading conditions (PSC), which often lead to multiple local maxima in the power-voltage curve. Unlike traditional MPPT methods, the GWO algorithm demonstrates a highly efficient and adaptive search mechanism that accurately identifies the Global Maximum Power Point (GMPP). The system achieves a peak power output of 395 – 400 W with a rapid tracking time of ⩽0.20 seconds and MPPT efficiency exceeding 97.3%. Voltage stability is maintained within ±1.2%, and the duty cycle converges within a tight range of 0.55–0.62, minimizing switching losses and ensuring consistent performance. This research presents a comprehensive performance evaluation, confirming that the proposed GWO-based MPPT not only enhances energy extraction but also improves overall system responsiveness and reliability under dynamic environmental conditions.


  • Advanced Neural Networks for Plant Leaf Disease Diagnosis and Classification

    by Tanvir Rahman, Durjoy Roy Dipto, Sowrov Komar Shib, Abu Shufian, Sajid Hossain

    Plant diseases pose significant threats to crop quality and yield, making early detection critical for ensuring agricultural productivity and public health. Traditional manual inspection methods are inefficient for large-scale farming and prone to human error. This study introduces a Convolutional Neural Network (CNN) model for automated plant disease diagnosis using leaf images. The model incorporates advanced architectures, including EfficientNet, ResNet, and Inception, and leverages transfer learning to enhance performance on limited datasets, reducing the need for extensive labeled data. By integrating deep learning with machine vision, the system enables real-time monitoring, offering actionable insights for timely intervention. The model, tested on a system equipped with a 12th Gen Intel(R) Core (TM) i5-12450HX CPU, 24 GB of RAM, and a 64-bit operating system, achieves a computation time of just 40 seconds. It delivers an overall accuracy of 97%, with precision rates of 95.39% for Healthy, 98.89% for Rust-Affected, and 97.06% for Scab-Affected leaves, and recall rates between 96.49% and 98.33%. These results demonstrate the potential of deep learning to improve plant disease detection, minimize chemical use, and support sustainable agriculture, with reproducibility ensured through hardware documentation.


  • Enhanced Dynamic Voltage Restorer (DVR) with Fuzzy Logic Control for Voltage Regulation

    by Tanvir Rahman, Sowrov Komar Shib, Durjoy Roy Dipto, Abu Shufian, Sajid Hossain

    Three-phase Dynamic Voltage Restorer (DVR) utilizing a Fuzzy Logic Controller (FLC) to improve power quality in electrical distribution systems. The DVR is designed to protect sensitive loads from voltage sags, swells, and harmonics by monitoring voltage levels and injecting compensating voltages to ensure a stable and reliable power supply. The system includes a three-phase supply connected to a transformer, with the DVR placed after the transformer to mitigate voltage disturbances. The fuzzy logic controller adjusts the DVR output based on reference and load voltage measurements, providing efficient voltage compensation. The proposed DVR system achieves 95 % efficiency in correcting voltage disturbances and reduces total harmonic distortion to 2.41%. Simulation results validate the effectiveness of the FLC-based DVR demonstrating faster response times and minimal steady-state error compared to traditional controllers. This integration enhances voltage regulation and fault resilience, making it a valuable contribution to renewable energy and power electronics fields, highlighting the potential of advanced control techniques in improving grid-connected system performance. The FLC-based DVR reduces voltage sag to 0.68 %and response time to <0.5 msec. The simulation for this research was carried out using MATLAB Simulink Optimization.


  • A Techno-Economic Feasibility Analysis of Solar Thermal System Installation for Sanitary Hot Water Requirements in a Residential Building

    by Sajid Hossain, Abu Shufian

    Existing studies on solar thermal systems for residential complexes often face challenges in achieving a balance between energy generation, cost-effectiveness, and environmental impact. This paper investigates the feasibility of a solar thermal system for meeting the Sanitary Hot Water (SHW) demand in a residential complex. The study addresses these challenges by evaluating the potential of solar thermal energy in comparison to other renewable energy sources. The analysis focuses on an existing residential complex located at Heriot Watt University, Edinburgh, where the roof space available for solar collectors is limited to 150 m2. The proposed system consists of 58 flat-plate vertical collectors, which were selected based on this available area. The system is projected to generate 8,217 kWh in June and 2,193 kWh in November, offsetting the energy demand in June and approximately half of the demand in November. A 30kW auxiliary boiler is proposed to cover the remaining energy deficit in November. The environmental benefits of the system include a reduction of 7.7 tons of CO2 emissions annually, by replacing gas-fired boilers. With an initial investment of £32,000, which includes the cost of collectors, heating system, and installation, the system offers a payback period of 12.5 years when factoring in annual savings from reduced gas consumption.


  • GreenScape: IoT Empowered Tree Advisor Device for Sustainable Land Management

    by Ammar Bin Mahmud, Sristi Paul, Sajid Hossain

    GreenScape is an intelligent tree plantation advisor device that combines air quality monitoring, soil analysis, and tree suitability assessments to improve sustainable land management. Driven by microcontroller technology, it provides real-time data on air quality metrics and soil qualities, enabling informed decision-making in tree-planting projects. Users can input land acreage and desired tree spacing, enhancing planning and resource utilization. GreenScape supports the Sustainable Development Goals, specifically Goal 13: Climate Action and Goal 15: Life on Land, by enhancing air quality and climate resilience. It optimizes tree species selection, design, and long-term monitoring, ensuring scalability and practicality. The device also conducts extensive environmental monitoring and long-term evaluation to build a greener future by protecting terrestrial ecosystems and minimizing climate change effects.

  • Respiratory Health Monitor: Innovating with a Compact Digital Spirometer

    by Iftear Hossain Ratul, Shahriar Soudeep, Most. Lilun Nahar Aurthy, Faisal, Abir Hasan, Sajid Hossain

    The purpose of this paper is to present a smart spirometer for calculating lungs capacity using a microcontroller and display the output on LCD display. The spirometer is the most common type of pulmonary function or breathing test. This test measures how much air one can breathe in and out of their lungs, as well as how easily and fast one can blow the air out of their lungs. This project is based on a simple design using readily available electronic components and sensors, which can be easily assembled and calibrated. Sometimes using a spirometer, users do not easily understand the output of the device. The device also has a display to overview the user’s lung capacity with the amount and the condition of their lungs is it good or bad. The final developed device has been tested several times to monitor its accuracy and reliability and make it suitable for use. We believe that this project can help make spirometers more accessible to a wider range of individuals and communities.

  • Open Access

    A Review of Hybrid Renewable and Sustainable Power Supply System: Unit Sizing, Optimization, Control, and Management

    by Shameem Ahmad, Sheikh Md. Nahid Hasan, Sajid Hossain, Raihan Uddin, Tofael Ahmed, A. G. M. B. Mustayen, Rifat Hazari, Mahamudul Hassan, Shahariar Parvez, Arghya Saha

    Since rising worldwide energy consumption is anticipated with increasing rapid industrialization and urbanization, green energy sources have become the ineluctable choice among energy engineers, power engineers, and researchers for carbon-free and sustainable electric power generation. By integrating several energy sources, a hybrid renewable and sustainable power supply system (HRSPSS) has been created to solve the global warming problem. HRSPSS aims to develop contemporary electricity grids that benefit society, the environment, and the economy. However, there is a need for thorough assessment of these complex HRSPSSs for making the most use of renewable energy potential and carefully crafting suitable solutions. This paper provides a thorough investigation of the most effective methods for sizing, optimizing, controlling, and managing energy, as well as how to combine different renewable energy sources to create a hybrid sustainable power supply system. Information on several software simulation tools and optimization methods that have been used to support HRSPSS development, research, and planning is presented in this study. Additionally, this study covers energy management and control strategies that have been used to ensure efficient and optimal operation of HRSPSS. Furthermore, this article presents an extensive comparison among various strategies utilized in each area (sizing, optimizing, controlling, and managing energy) to provide conclusive remarks on the suitable strategies for respective applications. The outcome of this study will help various stakeholders in the energy sector to make appropriate decisions during the design, development, and implementation phases of a hybrid sustainable power supply system.