Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rysgul N. Tuleyeva has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    EFFECTS OF CULTIVATION PARAMETERS ON BACTERIAL NANOCELLULOSE PRODUCTION BY KOMAGATAEIBACTER XYLINUS DSM 2325

    by Ayaz Belkozhayev, Pavel Neumyvakin, Rysgul Tuleyeva, Madina Mussalimova, Gauhargul Yelemessova, Nargiz Gizatullina, Gaukhar Toleutay

    Bacterial nanocellulose (BNC) is a high-value biopolymer with promising applications in biomedical engineering, food technology, packaging, and advanced materials. However, industrial implementation remains constrained by relatively low production yields and the sensitivity of cellulose biosynthesis to cultivation conditions. In the present study, the combined effects of temperature, initial pH, ethanol concentration, and sodium lactate concentration on BNC production by Komagataeibacter xylinus (K. xylinus) DSM 2325 under agitated cultivation conditions were investigated using a four-factor Box–Behnken design coupled with Response Surface Methodology (RSM). Twenty-nine experimental runs were conducted, and BNC yield was evaluated as dry cellulose production. The highest experimental yield (0.446 g/L) was obtained at 30 °C, pH 6, 2% (v/v) ethanol, and without sodium lactate supplementation. Analysis of variance demonstrated that temperature, pH, and sodium lactate significantly affected BNC production, whereas ethanol showed no statistically significant linear effect. The developed quadratic model was significant (p = 0.0001) with an R² value of 0.7752. Numerical optimization predicted optimal cultivation conditions of 24.4 °C, pH 4.57, 2% ethanol, and 0.04% sodium lactate, corresponding to a predicted yield of 0.767 g/L. However, experimental validation revealed lower cellulose production under optimized conditions than under the standard medium. Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analyses confirmed the successful synthesis of chemically pure BNC with a characteristic cellulose I crystalline structure. Scanning electron microscopy (SEM) was used to evaluate the surface morphology and fibrillar network structure of the bacterial nanocellulose samples. These findings demonstrate the importance of experimental validation when applying statistical optimization approaches to BNC production systems. Keywords: bacterial nanocellulose; Komagataeibacter xylinus; response surface methodology; Box–Behnken design; ethanol; sodium lactate; optimization.

  • Open Access

    Dynamic Schiff Base Chitosan–Lignin Bioplastics with Thermally Assisted Repair and a Reprocessable Network

    by Rysgul Tuleyeva, Nargiz Gizatullina, Madina Mussalimova, Zhanserik Shynykul, Gaukhar Toleutay

    The development of renewable polymer networks combining mechanical performance with repairability and reprocessability is important for advancing sustainable materials. In this study, chitosan-dialdehyde lignin (Ch-DAL) bioplastic films were fabricated through dynamic Schiff base cross-linking between tartaric acid-protonated chitosan and periodate-oxidized lignin, with glycerol as a plasticizer. Films with Ch:DAL ratios of 1:1, 2:1, and 1:2 were characterized by Fourier-transform infrared (FTIR) spectroscopy, tensile testing, qualitative solvent-resistance assessment, a thermally assisted repair test, and two successive thermo-mechanical reprocessing cycles. FTIR analysis was consistent with the possible formation of imine (C=N) linkages and the contribution of hydrogen-bonding interactions, although aldehyde content, degree of conversion, and cross-link density were not quantitatively determined. The mechanical properties were composition-dependent, with the 1:1 formulation exhibiting the highest tensile strength (8.85 ± 0.09 MPa) and Young’s modulus (118.7 ± 0.7 MPa), whereas the 2:1 formulation exhibited the highest elongation at break (238 ± 0.1%). Thermogravimetric analysis (TGA) and derivative thermogravimetry (DTG) showed distinct thermal-degradation profiles for alkali lignin, DAL, and the 1:1 Ch–DAL film, with residual masses of approximately 17%, 57%, and 33% at 600 °C, respectively. Qualitative assessment showed that the films retained structural integrity in water, 1 M sodium hydroxide (NaOH), and the investigated organic solvents but underwent visible fragmentation in 1 M hydrochloric acid (HCl). Following hot pressing of the cut 1:1 film at 50 °C, macroscopic continuity was re-established and tensile strength increased to 12.9 ± 0.11 MPa; however, elongation at break decreased from 19.0 ± 0.1% to 4.3 ± 0.05%, indicating a mechanically distinct repaired state rather than recovery of the original properties. Fragmented films could also be remolded through two successive thermo-mechanical reprocessing cycles, although tensile strength decreased substantially after the first cycle and recovered only partially during the second cycle. These findings demonstrate composition-dependent mechanical behavior, thermally assisted repair, and remolding capability in Ch-DAL films, while further quantitative characterization, durability testing, and environmental assessment are required before claims regarding long-term performance or sustainability can be established.

  • Open Access

    Bacterial Cellulose- and Laponite-Reinforced Corn Starch Bioplastics for Sustainable Packaging

    by Rysgul Tuleyeva, Nargiz Gizatullina, Alexey Shakhvorostov, Zhanserik Shynykul, Gaukhar Toleutay

    Growing environmental concerns associated with petroleum-based plastics have stimulated the development of renewable and biodegradable alternatives. In this study, corn-starch-based composite films were prepared with bacterial cellulose (BC), α-cellulose (α-C), or carboxylated cellulose nanofibers (CNC) in the presence of laponite and glycerol. The films were characterized using Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis, optical measurements at 600 nm, tensile testing, qualitative solvent-exposure tests, and thermally induced repair experiments. Among the films containing different cellulose types, the bacterial-cellulose-containing bioplastic (BC-BP) exhibited the highest tensile strength and Young’s modulus, reaching 4.47 and 0.229 MPa, respectively. The carboxylated-cellulose-nanofiber-containing bioplastic (CNC-BP) showed the highest elongation at break (100%) and the lowest thickness-normalized optical attenuation (0.38 mm−1), whereas the α-cellulose-containing bioplastic (α-C-BP) exhibited the highest maximum degradation-rate temperature (approximately 315 °C). Increasing the BC content from 0.25 to 1.0 g increased tensile strength from 3.17 ± 0.13 to 7.78 ± 0.31 MPa and Young’s modulus from 0.260 ± 0.002 to 0.996 ± 0.009 MPa. This increase was accompanied by a reduction in elongation at break from 41 ± 1.6% to 16 ± 0.6%. The BC-BP films retained their visible integrity after exposure to selected organic solvents but underwent substantial changes under strongly acidic and alkaline conditions. Following thermally induced repair, the BC-BP film recovered approximately 55% of its tensile strength and 45% of its Young’s modulus while retaining an elongation at break close to that of the original film. These results demonstrate that cellulose type and BC content can be used to adjust the measured thermal, optical, mechanical, and repair properties of starch–cellulose–Laponite films. Further structural, barrier, migration, and food-contact safety evaluations are required to establish their suitability for packaging applications.

  • Open Access

    Recent Advances in Lignin-Based Coatings for Sustainable and Biodegradable Materials

    by Ayaz Belkozhayev, Rysgul Tuleyeva, Nargiz Gizatullina, Gaukhargul Yelemessova, Madina Mussalimova, Gaukhar Toleutay

    The growing demand for environmentally sustainable materials has accelerated the development of bio-based coatings as alternatives to conventional petroleum-derived surface treatments. Among renewable biopolymers, lignin has emerged as a particularly attractive candidate owing to its abundance, renewable origin, aromatic structure, antioxidant activity, ultraviolet shielding capability, and diverse functional groups suitable for chemical modification. As a major by-product of the pulp, paper, and biorefinery industries, lignin represents an underutilized renewable resource with significant potential for value-added coating applications. This review provides an overview of recent advances in lignin-based coatings for sustainable and biodegradable materials. The chemical structure, physicochemical properties, industrial sources, extraction technologies, purification methods, and functionalization strategies of lignin are discussed. Particular attention is given to nanostructured lignin systems, including lignin nanoparticles (LNPs) and chemically modified derivatives, which have demonstrated improved compatibility and performance in coating formulations. Fabrication technologies such as solution casting, dip coating, spray coating, layer-by-layer (LbL) assembly, extrusion processing, and nanocomposite approaches are examined. Mechanical, barrier, thermal, UV-shielding, antioxidant, antimicrobial, hydrophobic, and environmental performance are comparatively assessed. Lignin nanoparticles and chemically modified lignins generally show improved functionality, while waterborne coatings for paper and fiber-based packaging appear closest to practical application. However, lignin heterogeneity, durability, scalability, and limited regulatory evaluation and end-of-life assessment remain major barriers to commercialization.


  • БАКТЕРИЯЛЫҚ ЦЕЛЛЮЛОЗАНЫ АЛУ ЖӘНЕ ТАЗАРТУ ӘДІСТЕРІНІҢ ТИІМДІЛІГІ, ЭКОЛОГИЯЛЫҚ ӘСЕРІ ЖӘНЕ ҚОЛДАНБАЛАРЫ ТҰРҒЫСЫНАН САЛЫСТЫРМАЛЫ ШОЛУ

    by Ронагуль Турганова, Рысгуль Тулеева

    Бактериялық целлюлоза өсімдік текті целлюлозаға балама болып табылатын, жоғары тазалығы, кристалдылығы және биосәйкестілігімен ерекшеленетін микробтық биополимер. Бұл материалдың құрылымдық және функционалдық қасиеттері оны медицина, тағам қаптамасы, тоқыма және композиттік материалдар сияқты әртүрлі салаларда қолдануға мүмкіндік береді. Зерттеуде бактериялық целлюлоза өндіруде қолданылатын негізгі микробтық штаммдар мен қоректік орталар, сондай-ақ ауылшаруашылық және өнеркәсіптік қалдықтарды көміртек көзі ретінде пайдалану мүмкіндіктері сипатталады. Тазарту әдістері (сілтілік өңдеу, беттік-белсенді заттар, ферменттік және физикалық тәсілдер) тиімділік, экологиялық жүктеме және соңғы қолдану саласына сәйкестік тұрғысынан салыстырмалы түрде қарастырылады. Салыстырмалы талдау нәтижелері көміртек көзі мен штамм таңдау, сондай-ақ тазарту әдісін бейімдеу арқылы өндіріс өнімділігі мен тазалық деңгейін арттыруға болатынын көрсетеді. Биоыдырайтын реагенттер мен қалдықсыз технологияларды енгізу бактериялық целлюлоза өндірісінің тұрақтылығын арттыруда маңызды рөл атқарады. Шолу мақаласында өмірлік циклдік бағалау, экологиялық қауіпсіздік, өндіріс шығындары мен соңғы қолдану талаптарын ескере отырып, бактериялық целлюлозаны өнеркәсіптік деңгейде қолдану үшін қажетті технологиялық шешімдер мен болашақ бағыттар жүйелі түрде қарастырылады. Кілттік сөздер: бактериялық целлюлоза; тазарту әдістері; өндіріс тиімділігі; экологиялық тұрақтылық; қолдану салалары

  • Open Access

    Bacterial Cellulose for Sustainable Food Packaging: Production Pathways, Structural Design, and Functional Modification Strategies

    by Ronagul Turganova, Rysgul Tuleyeva, Ayaz Belkozhayev, Nargiz Gizatullina, Gaukhargul Yelemessova, Anel Taubatyrova, Madina Mussalimova, Zhanserik Shynykul, Gaukhar Toleutay

    Global concern over food waste and plastic pollution highlights the urgent need for sustainable, high-performance materials that can replace petroleum-based plastics. Bacterial cellulose (BC), a biopolymer synthesized through microbial fermentation by Komagataeibacter and related genera, shows exceptional purity, mechanical strength, biodegradability, and structural tunability. Following PRISMA principles, this review analyzed studies from PubMed, Scopus, and Web of Science covering the period 1960–November 2025. Search terms included “bacterial cellulose”, “Komagataeibacter”, “Gluconacetobacter”, “static culture”, “agitated culture”, “in situ modification”, “ex situ modification”, “fermentation”, and “food packaging”. Inclusion and exclusion criteria ensured that only relevant and high-quality publications were considered. The article summarizes major developments in BC biosynthesis, structural organization, and modification approaches that enhance mechanical, barrier, antioxidant, and antimicrobial properties for food packaging. Recent advances in in situ and ex situ functionalization are discussed together with progress achieved through synthetic biology, green chemistry, and material engineering. Evidence shows that BC-based composites can reduce oxygen and moisture permeability, strengthen films, and prolong food shelf life while maintaining biodegradability. Remaining challenges such as high cost, lengthy fermentation, and regulatory uncertainty require coordinated strategies focused on metabolic optimization, circular bioeconomy integration, and standardized safety frameworks to unlock BC’s full industrial potential.


  • Open Access

    POLYSACCHARIDE-BASED BIOPLASTICS FOR SUSTAINABLE PACKAGING: ROLE OF NONCOVALENT INTERACTIONS AND TRANSESTERIFICATION

    by R. N. Tuleyeva, N. N. Gizatullina, R. A. Turganova, A. M. Belkozhayev, G. Toleutay

    The growing accumulation of plastic waste in ecosystems has catalyzed a global search for environmentally responsible packaging materials. Among biodegradable polymers, bioplastics derived from polysaccharides – especially from plant-based cellulose and its microbial analogue, bacterial cellulose (BC) – have attracted significant interest due to their renewability, biodegradability, and desirable mechanical attributes. Nevertheless, their practical application is frequently constrained by challenges such as hydrophilicity and vulnerability to environmental stressors. To overcome these issues, recent studies have explored structural modifications involving both noncovalent interactions (e.g., hydrogen bonding, ionic crosslinking) and covalent strategies such as transesterification. These approaches have been shown to improve mechanical integrity, flexibility and water resistance. This review discusses recent progress in engineering polysaccharide-based bioplastics, with a particular emphasis on how combined physical and chemical modifications can enhance performance. Special attention is given to hybrid systems incorporating BC, laponite, chitosan, and fatty acid esters, which demonstrate promising synergistic effects. Overall, the integration of noncovalent and covalent modifications offers a compelling strategy for developing next-generation sustainable packaging materials.

  • Open Access

    Development of Mucoadhesive Vaginal Films for Metronidazole Delivery Using Methacryloylated, Crotonoylated, and Itaconoylated Gelatin Blends with Poly(vinyl alcohol)

    by Elvira O. Shatabayeva, Daulet B. Kaldybekov, Zarina A. Kenessova, Rysgul N. Tuleyeva, Sarkyt E. Kudaibergenov, Vitaliy V. Khutoryanskiy

    Purpose: This work reports the development and characterisation of polymeric films composed of gelatin or its chemically modified derivatives (crotonoylated, itaconoylated, and methacryloylated gelatins) blended with polyvinyl alcohol (PVA). Metronidazole served as an antimicrobial drug in these formulations. Methods: The films were produced by casting aqueous solutions of polymers, followed by solvent evaporation. Their structure and physicochemical characteristics were studied using Fourier transform infrared spectroscopy, scanning electron microscopy, and mechanical testing. The thickness of the films, their folding endurance, the surface pH, and transparency were also evaluated. The mucoadhesive performance of the films was evaluated through an ex vivo detachment technique involving freshly excised sheep vaginal tissues. In vitro cumulative drug release studies were conducted using Franz diffusion cells. Results: The results demonstrate that incorporating unsaturated functional groups into gelatin improves its mucoadhesive properties compared to native gelatin. The drug release experiments conducted in vitro showed that the cumulative release from pure gelatin/PVA films was found to be 49 ± 2%, whereas modified gelatins/PVA (70:30) films released ~ 64–71%. Conclusion: These findings suggest that modified gelatins could serve as effective excipients in designing mucoadhesive formulations for vaginal administration, with potential applications extending to other transmucosal drug delivery systems. Graphical


  • Preparation and Characterization of Amphoteric Polysaccharides Derived From Chitosan and Gellan Gum

    by Rysgul N. Tuleyeva, Gulnur S. Tatykhanova, Nargiz N. Gizatullina, Daulet B. Kaldybekov, Yuliia V. Bardadym, Vladimir O. Aseyev, Sarkyt E. Kudaibergenov

    Polysaccharides such as chitosan (Ch) and gellan gum (GG) were chemically modified to produce water–soluble amphoteric polyelectrolytes. These derivatives were synthesized via carboxymethylation and quaternization reactions and characterized using techniques including 1H NMR, FTIR spectroscopies, elemental analysis, potentiometric titration, and thermogravimetric analysis (TGA). The degree of quaternization of gellan gum (QGG) with trimethylammonium groups was determined to be ~38% as by 1H NMR spectroscopy; ~35% based on potentiometric titration, and ~39% according to elemental analysis. Similarly, the degree of carboxymethylation of chitosan (CMCh) was calculated as ~37% according to 1H NMR data, while back potentiometric titration provided a value of ~35%. The modified polysaccharides exhibited distinct isoelectric points (pHIEP) as determined through electrophoretic mobility measurements and conventional viscometric analysis. The data collected from both techniques were in good agreement indicating pHIEP = 2.0–2.5 for the modified gellan gum and pHIEP = 7.0 for the modified chitosan. Amphoteric Ch and GG were used to stabilize spherical (AuNSs) and rod‐like (AuNRs) gold nanoparticles, synthesized using “one‐pot” and seed‐growth methods, respectively. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) confirmed particle binding to the modified polymers. The average diameters of AuNSs stabilized with QGG and CMCh were ~45 and 85 nm, respectively, whereas AuNRs stabilized by QGG and CMCh exhibited dimensions of ~50–55 nm (length) and ~12–14 nm (width). These findings suggest that amphoteric QGG and CMCh‐stabilized AuNSs and AuNRs could potentially be used as effective photothermal agents for treating Ehrlich cancer cells, as previously reported by our research group (Macromolecular Chemistry and Physics, 2024, 2400128).


  • Open Access

    Development and Investigation of Mucoadhesive Polymers Based on Chitosan for Intravesical Therapy

    by Daulet B. Kaldybekov, Elvira O. Shatabayeva, Aziza A. Polatkhan, Rysgul N. Tuleyeva, Galiya S. Irmukhametova, Vitaliy V. Khutoryanskiy

    Intravesical drug delivery (IDD) refers to the administration of therapeutic agents directly into the urinary bladder through a catheter. Low permeability of the urinary bladder epithelium, poor retention of the therapeutic agents due to dilution and periodic urine voiding as well as frequent catheterizations (with potential risk of infections) are the major limitations of IDD used in the treatment of bladder-related disorders, such as bladder cancer. In this work, the mucoadhesive properties of polymeric materials based on chitosan, chitosan-gellan gum, and chitosan-Carbopol™ 940 containing sodium fluorescein (NaFI) were investigated for their potential application in intravesical drug delivery. The evaluation of mucoadhesive properties was carried out using an in vitro flow-through method with fluorescent detection that simulates the interaction conditions of polymers with the urinary bladder mucosa. Additionally, the release kinetics of NaFI from polymer compositions under conditions mimicking the physiological environment of the bladder was studied using a fluorescence spectrometry. The acquired data confirm the promise of using chitosan-based mucoadhesive polymers in developing systems for intravesical drug delivery, which could significantly enhance the efficacy of IDD therapy to treat urinary bladder-related disorders.