Yude Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yude Jiang has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Minan Tang
Lanzhou Jiaotong University
6 shared publications - Wenxin Sheng
School of Automation and Electrical Engineering, Lanzhou Jiaotong University Lanzhou China
5 shared publications - Chuntao Rao
School of Automation and Electrical Engineering, Lanzhou Jiaotong University Lanzhou China
4 shared publications - Zhongcheng Bai
School of Automation and Electrical Engineering, Lanzhou Jiaotong University Lanzhou China
4 shared publications - Changyou Wang
College of Automation and Electrical Engineering, Lanzhou Jiaotong University , Lanzhou 730070, Gansu
3 shared publications - Hanting Li
School of Automation and Electrical Engineering, Lanzhou Jiaotong University, Lanzhou, China
3 shared publications
Latest Publications
- 1 May 2026
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 18 (3)
BN–LSSVM–BO model prediction of the impact of time-of-use electricity pricing strategies for electric vehicle charging demand
Electric vehicle charging behavior exhibits strong randomness, resulting in complex and uncertain factors influencing charging demand. To accurately characterize the multidimensional and dynamic variations of these factors, this research proposes a Bayesian network–least squares support vector machine (BN–LSSVM) ensemble model under Bayesian optimization (BO). This approach enables comprehensive multi-factor analysis while specifically highlighting the impact of time-of-use pricing on charging demand. First, considering the differences in charging demand among people on different dates and under different weather conditions, a multi-factor joint probability modeling—BN model was constructed to analyze the probability distribution parameters of charging demand under different combinations of factors. Subsequently, the LSSVM model is employed to integrate the probability characteristics of charging demand, constructing a nonlinear relationship between electricity prices and demand, and realizing the different effects of different strategies on charging demand. Furthermore, employing BO to optimize the regularization parameters and kernel parameters of LSSVM, thereby achieving hyperparameter adaptive global optimization. Finally, the article takes the historical data from the Honghai Technology Charging Station in Qilihe District, Lanzhou, over a 1-month period as a case study; the results show that the combined model BN–LSSVM–BO has the smallest mean absolute error of 1.66 and root mean square error of 2.76 compared to independent, unoptimized models, demonstrating better demand forecasting capabilities. The BN–LSSVM–BO peak-time floating strategy reduced peak-time demand by 29.4%, while the valley time discount increased valley time demand by 12.2%, verified the significant impact of time-of-use pricing strategies on charging demand.
- 1 May 2026
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 18 (3)
BN–LSSVM–BO model prediction of the impact of time-of-use electricity pricing strategies for electric vehicle charging demand
Electric vehicle charging behavior exhibits strong randomness, resulting in complex and uncertain factors influencing charging demand. To accurately characterize the multidimensional and dynamic variations of these factors, this research proposes a Bayesian network–least squares support vector machine (BN–LSSVM) ensemble model under Bayesian optimization (BO). This approach enables comprehensive multi-factor analysis while specifically highlighting the impact of time-of-use pricing on charging demand. First, considering the differences in charging demand among people on different dates and under different weather conditions, a multi-factor joint probability modeling—BN model was constructed to analyze the probability distribution parameters of charging demand under different combinations of factors. Subsequently, the LSSVM model is employed to integrate the probability characteristics of charging demand, constructing a nonlinear relationship between electricity prices and demand, and realizing the different effects of different strategies on charging demand. Furthermore, employing BO to optimize the regularization parameters and kernel parameters of LSSVM, thereby achieving hyperparameter adaptive global optimization. Finally, the article takes the historical data from the Honghai Technology Charging Station in Qilihe District, Lanzhou, over a 1-month period as a case study; the results show that the combined model BN–LSSVM–BO has the smallest mean absolute error of 1.66 and root mean square error of 2.76 compared to independent, unoptimized models, demonstrating better demand forecasting capabilities. The BN–LSSVM–BO peak-time floating strategy reduced peak-time demand by 29.4%, while the valley time discount increased valley time demand by 12.2%, verified the significant impact of time-of-use pricing strategies on charging demand.
- 2 January 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 104 (7) , 3527-3545
Model predictive control of coal‐fired power plant desulphurization system based on GJO ‐ TCN ‐ BiGRU ‐attention
The wet flue gas desulphurization (WFGD) system is characterized by nonlinearity, strong coupling, time‐varying, and input–output delays, which make it difficult for traditional control methods to accurately control the WFGD system. In this paper, a combination of neural network (NN) predictive model and model predictive control (MPC) is proposed to be used for the optimal control of the WFGD system. Firstly, the prediction model of the WFGD system is established by temporal convolutional network (TCN)‐bidirectional gated recurrent unit (BiGRU)‐attention. Secondly, the hyperparameters of the prediction model are optimized using the golden jackal optimization (GJO). Then, the WFGD system is controlled by MPC. Meanwhile, in this paper, the original dataset of the WFGD system is screened to remove outliers using a local outlier factor (LOF) detection algorithm. Finally, based on the Matlab R2023a platform, this method is compared with the PID algorithm, and the actual effect is improved by about 28%. The experimental results show that the GJO‐TCN‐BiGRU‐attention model can predict the desulphurization system well, and the control effect of the MPC method on the desulphurization system is better than PID algorithm.
- 2 January 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 104 (7) , 3527-3545
Model predictive control of coal‐fired power plant desulphurization system based on GJO ‐ TCN ‐ BiGRU ‐attention
The wet flue gas desulphurization (WFGD) system is characterized by nonlinearity, strong coupling, time‐varying, and input–output delays, which make it difficult for traditional control methods to accurately control the WFGD system. In this paper, a combination of neural network (NN) predictive model and model predictive control (MPC) is proposed to be used for the optimal control of the WFGD system. Firstly, the prediction model of the WFGD system is established by temporal convolutional network (TCN)‐bidirectional gated recurrent unit (BiGRU)‐attention. Secondly, the hyperparameters of the prediction model are optimized using the golden jackal optimization (GJO). Then, the WFGD system is controlled by MPC. Meanwhile, in this paper, the original dataset of the WFGD system is screened to remove outliers using a local outlier factor (LOF) detection algorithm. Finally, based on the Matlab R2023a platform, this method is compared with the PID algorithm, and the actual effect is improved by about 28%. The experimental results show that the GJO‐TCN‐BiGRU‐attention model can predict the desulphurization system well, and the control effect of the MPC method on the desulphurization system is better than PID algorithm.
- 26 August 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 104 (3) , 1314-1333
Optimal control of carbon capture system in coal‐fired power plant based on fusion of CNN ‐ LSTM and EMPC for MOGWO optimization
Coal‐fired power plants remain a major source of global CO 2 emissions, posing urgent challenges for climate mitigation. This study proposes an AI‐enabled optimal control strategy for solvent‐based post‐combustion CO 2 capture (PCC), aiming to reduce energy consumption and enhance environmental performance. A deep learning model combining convolutional neural networks and long short‐term memory (CNN‐LSTM) is developed to predict multi‐step CO 2 capture rates. This model is integrated with a multi‐objective grey wolf optimizer (MOGWO)‐based economic model predictive controller (EMPC), which dynamically adjusts key operating variables. Simulation results demonstrate that the proposed control scheme achieves a 12.4% reduction in capture cost and a 10.6% decrease in energy consumption, while maintaining a high CO 2 capture efficiency of 95.3%. These improvements not only optimize process economics while significantly lowering the environmental impact of carbon capture systems. These improvements contribute directly to carbon mitigation, offering a promising pathway for cleaner and more sustainable operation of coal‐based power generation under dynamic industrial conditions.
- 26 August 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 104 (3) , 1314-1333
Optimal control of carbon capture system in coal‐fired power plant based on fusion of CNN ‐ LSTM and EMPC for MOGWO optimization
Coal‐fired power plants remain a major source of global CO 2 emissions, posing urgent challenges for climate mitigation. This study proposes an AI‐enabled optimal control strategy for solvent‐based post‐combustion CO 2 capture (PCC), aiming to reduce energy consumption and enhance environmental performance. A deep learning model combining convolutional neural networks and long short‐term memory (CNN‐LSTM) is developed to predict multi‐step CO 2 capture rates. This model is integrated with a multi‐objective grey wolf optimizer (MOGWO)‐based economic model predictive controller (EMPC), which dynamically adjusts key operating variables. Simulation results demonstrate that the proposed control scheme achieves a 12.4% reduction in capture cost and a 10.6% decrease in energy consumption, while maintaining a high CO 2 capture efficiency of 95.3%. These improvements not only optimize process economics while significantly lowering the environmental impact of carbon capture systems. These improvements contribute directly to carbon mitigation, offering a promising pathway for cleaner and more sustainable operation of coal‐based power generation under dynamic industrial conditions.
- 19 March 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (10) , 4904-4924
Prediction control of CO2 capture in coal‐fired power plants based on ERIME‐optimized CNN‐LSTM‐multi‐head‐attention
Predicting CO2 concentration in post‐combustion carbon capture (PCC) systems is challenging due to complex operating conditions and multivariate interactions. This study proposes an enhanced RIME algorithm (ERIME) optimization‐based convolutional neural network (CNN)‐long short‐term memory (LSTM)‐multi‐head‐attention (ECLMA) model to improve prediction accuracy. The local outlier factor (LOF) algorithm was used to remove noise from the data, while mutual information (MI) determined time lags, and the smoothed clipped absolute deviation (SCAD) method optimized feature selection. The CNN‐LSTM‐multi‐head‐attention model extracts meaningful features from time series data, and parameters are optimized using the ERIME algorithm. Using a simulated dataset from a 600 MW supercritical coal‐fired power plant, the results showed that after LOF outlier removal, root mean square error (RMSE) and mean absolute error (MAE) improved by 10%–13%. Post‐MI delay reconstruction reduced RMSE to 0.00999 and MAE to 11.6937, with R2 rising to 0.9929. After variable selection, RMSE and MAE further reduced to 0.00907 and 9.9697, with R2 increasing to 0.9983. After ERIME optimization, the ECLMA model outperformed traditional models, reducing RMSE and MAE by up to 91.55% and 84.94%, respectively, compared to CNN, and by 85.91% and 69.47%, respectively, compared to LSTM. These results confirm the model's superior accuracy and stability.
- 19 March 2025
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (10) , 4904-4924
Prediction control of CO2 capture in coal‐fired power plants based on ERIME‐optimized CNN‐LSTM‐multi‐head‐attention
Predicting CO2 concentration in post‐combustion carbon capture (PCC) systems is challenging due to complex operating conditions and multivariate interactions. This study proposes an enhanced RIME algorithm (ERIME) optimization‐based convolutional neural network (CNN)‐long short‐term memory (LSTM)‐multi‐head‐attention (ECLMA) model to improve prediction accuracy. The local outlier factor (LOF) algorithm was used to remove noise from the data, while mutual information (MI) determined time lags, and the smoothed clipped absolute deviation (SCAD) method optimized feature selection. The CNN‐LSTM‐multi‐head‐attention model extracts meaningful features from time series data, and parameters are optimized using the ERIME algorithm. Using a simulated dataset from a 600 MW supercritical coal‐fired power plant, the results showed that after LOF outlier removal, root mean square error (RMSE) and mean absolute error (MAE) improved by 10%–13%. Post‐MI delay reconstruction reduced RMSE to 0.00999 and MAE to 11.6937, with R2 rising to 0.9929. After variable selection, RMSE and MAE further reduced to 0.00907 and 9.9697, with R2 increasing to 0.9983. After ERIME optimization, the ECLMA model outperformed traditional models, reducing RMSE and MAE by up to 91.55% and 84.94%, respectively, compared to CNN, and by 85.91% and 69.47%, respectively, compared to LSTM. These results confirm the model's superior accuracy and stability.
- 20 February 2025
- Published by Elsevier in Electric Power Systems Research
- Vol. 244
Non-dominated sorting WOA electric vehicle charging station siting study based on dynamic trip chain
- 20 February 2025
- Published by Elsevier in Electric Power Systems Research
- Vol. 244
Non-dominated sorting WOA electric vehicle charging station siting study based on dynamic trip chain
- 18 November 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (7) , 3153-3170
Prediction of SO2 concentration in WFGD system based on GWO optimized CNN‐BiLSTM‐attention
Due to external disturbances, the parameters of the desulphurization system are uncertain, and their relationships are complex, which makes it difficult to predict the concentration of SO2 at the desulphurization system outlet. In this paper, grey wolf optimization (GWO) optimized convolutional neural network (CNN)‐bi‐directional long short‐term memory (BiLSTM)‐Attention algorithm was used for prediction, and the problem of low SO2 concentration prediction accuracy at outlet has been resolved. First, the outliers of the thermal power plant desulphurization data were processed using the local outlier factor (LOF) algorithm. Secondly, CNN‐BiLSTM model was constructed using CNN and BiLSTM, and attention module was added to realize feature extraction and better capture the regularity of input data. Then, the CNN‐BiLSTM‐Attention model was optimized using GWO and its hyperparameters were improved. Finally, based on the Matlab R2023a platform, the prediction comparison as well as the error analysis of the desulphurization data were carried out. In the prediction of SO2 concentration in low‐flow continuous slurry supply mode, the error of the combined model decreased by 23.2% on average compared to the CNN‐BiLSTM‐Attention model. In the prediction of SO2 concentration in the high‐flow intermittent slurry supply mode, the error of the combined model decreased by 20.8% on average. According to the results, the combined model surpasses both the single model and several other algorithmic combination models in terms of performance metrics, and the predictions are more accurate.
- 18 November 2024
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 103 (7) , 3153-3170
Prediction of SO2 concentration in WFGD system based on GWO optimized CNN‐BiLSTM‐attention
Due to external disturbances, the parameters of the desulphurization system are uncertain, and their relationships are complex, which makes it difficult to predict the concentration of SO2 at the desulphurization system outlet. In this paper, grey wolf optimization (GWO) optimized convolutional neural network (CNN)‐bi‐directional long short‐term memory (BiLSTM)‐Attention algorithm was used for prediction, and the problem of low SO2 concentration prediction accuracy at outlet has been resolved. First, the outliers of the thermal power plant desulphurization data were processed using the local outlier factor (LOF) algorithm. Secondly, CNN‐BiLSTM model was constructed using CNN and BiLSTM, and attention module was added to realize feature extraction and better capture the regularity of input data. Then, the CNN‐BiLSTM‐Attention model was optimized using GWO and its hyperparameters were improved. Finally, based on the Matlab R2023a platform, the prediction comparison as well as the error analysis of the desulphurization data were carried out. In the prediction of SO2 concentration in low‐flow continuous slurry supply mode, the error of the combined model decreased by 23.2% on average compared to the CNN‐BiLSTM‐Attention model. In the prediction of SO2 concentration in the high‐flow intermittent slurry supply mode, the error of the combined model decreased by 20.8% on average. According to the results, the combined model surpasses both the single model and several other algorithmic combination models in terms of performance metrics, and the predictions are more accurate.