Faxin Li
Research Subjects
Faxin Li has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Qianqian Xue
Department of Earth Resources Engineering, Graduate School of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
2 shared publications Gaoyuan Lyu
1 shared publicationHaiyang Yu
1 shared publicationHaotian Chu
1 shared publicationJialin Lu
1 shared publication- Jicheng Zhang
College of Energy and Mining Engineering, Shandong University of Science and Technology, Qingdao 266590, China
1 shared publication
Latest Publications
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Flow field optimization and pollutant control in ventilation of coal mine excavation faces: A study on a novel air distribution system
With the advancement of mechanization and the deepening of mining operations, safety hazards at excavation faces, especially those related to elevated dust and methane concentrations, have become increasingly prominent and pose serious threats to miners' health and operational safety. To address these issues, a novel ventilation system was developed by improving traditional airflow strategies. This system integrates a specialized air distribution device and a dust removal fan to enhance the control of dust and methane levels. This study combines numerical simulation and orthogonal testing, using data and operational parameters from an actual fully mechanized coal mine excavation face. The optimization focuses on three key parameters of the air distribution device: air volume (50%, 60%, 70%, 80%, 90%), installation distance from the pressure outlet (10, 15, 20, 30, 40 m), and air outlet angle (−30°, −15°, 0°, 15°, 30°). The results show that the optimal configuration consists of a 70% air volume, a 10 m installation distance from the pressure outlet, and a 0° outlet angle. Under these conditions, the average dust concentration at the driver's breathing zone within approximately 5 m of the excavation face remains below 10 mg/m3, while methane concentrations stay under 0.5%, both meeting safety standards. This optimized ventilation arrangement improves the air velocity distribution and effectively reduces dust and methane concentrations at the excavation face, providing a practical reference for cleaner and safer underground operations.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Flow field optimization and pollutant control in ventilation of coal mine excavation faces: A study on a novel air distribution system
With the advancement of mechanization and the deepening of mining operations, safety hazards at excavation faces, especially those related to elevated dust and methane concentrations, have become increasingly prominent and pose serious threats to miners' health and operational safety. To address these issues, a novel ventilation system was developed by improving traditional airflow strategies. This system integrates a specialized air distribution device and a dust removal fan to enhance the control of dust and methane levels. This study combines numerical simulation and orthogonal testing, using data and operational parameters from an actual fully mechanized coal mine excavation face. The optimization focuses on three key parameters of the air distribution device: air volume (50%, 60%, 70%, 80%, 90%), installation distance from the pressure outlet (10, 15, 20, 30, 40 m), and air outlet angle (−30°, −15°, 0°, 15°, 30°). The results show that the optimal configuration consists of a 70% air volume, a 10 m installation distance from the pressure outlet, and a 0° outlet angle. Under these conditions, the average dust concentration at the driver's breathing zone within approximately 5 m of the excavation face remains below 10 mg/m3, while methane concentrations stay under 0.5%, both meeting safety standards. This optimized ventilation arrangement improves the air velocity distribution and effectively reduces dust and methane concentrations at the excavation face, providing a practical reference for cleaner and safer underground operations.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Mechanical behavior of rock-like samples with preexisting flaws: Influence of crack geometry on crack evolution and stress distribution
Underground engineering plays an important role in modern urban construction, transportation infrastructure, and resource extraction. The influence of the geometric characteristics of cracks in rock masses on their mechanical behavior and failure modes is a key scientific issue for ensuring the safety of underground structures. This study systematically investigates the effects of prefabricated crack angle and length on the mechanical response, crack propagation, and stress distribution of rock-like samples through uniaxial compression tests and particle flow code in two dimension (PFC2D) numerical simulations. The results show that crack angle significantly affects the sample strength, exhibiting a nonlinear trend of initially weakening and then strengthening. Increasing crack length exacerbates stress concentration, leading to a gradual reduction in peak strength and ultimately to saturation. Crack angle and length jointly influence the crack propagation path and failure mode. As the crack angle increases, the failure region shifts from the sample edge to the center. Longer cracks enhance the dominance of crack-induced failure and reduce the influence of preexisting holes. When the crack angle approaches 45°, acoustic emission (AE) energy release becomes more concentrated and abrupt. Moreover, longer cracks lead to earlier AE onset and faster energy accumulation. At the high-stress stage, the influence of crack geometry on stress distribution becomes more pronounced. The highest stress concentration occurs at a crack angle of 22.5°, and increasing crack length results in more complex damage evolution. Numerical simulations further validate these findings, revealing that both crack angle and length play dominant roles in stress redistribution.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Mechanical behavior of rock-like samples with preexisting flaws: Influence of crack geometry on crack evolution and stress distribution
Underground engineering plays an important role in modern urban construction, transportation infrastructure, and resource extraction. The influence of the geometric characteristics of cracks in rock masses on their mechanical behavior and failure modes is a key scientific issue for ensuring the safety of underground structures. This study systematically investigates the effects of prefabricated crack angle and length on the mechanical response, crack propagation, and stress distribution of rock-like samples through uniaxial compression tests and particle flow code in two dimension (PFC2D) numerical simulations. The results show that crack angle significantly affects the sample strength, exhibiting a nonlinear trend of initially weakening and then strengthening. Increasing crack length exacerbates stress concentration, leading to a gradual reduction in peak strength and ultimately to saturation. Crack angle and length jointly influence the crack propagation path and failure mode. As the crack angle increases, the failure region shifts from the sample edge to the center. Longer cracks enhance the dominance of crack-induced failure and reduce the influence of preexisting holes. When the crack angle approaches 45°, acoustic emission (AE) energy release becomes more concentrated and abrupt. Moreover, longer cracks lead to earlier AE onset and faster energy accumulation. At the high-stress stage, the influence of crack geometry on stress distribution becomes more pronounced. The highest stress concentration occurs at a crack angle of 22.5°, and increasing crack length results in more complex damage evolution. Numerical simulations further validate these findings, revealing that both crack angle and length play dominant roles in stress redistribution.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
Water invasion and residual gas distribution in partially filled fractures via phase-field method
Water invasion is a significant factor affecting the conductivity of fractures in coal seams. The partially contact characteristics of deep coal seam fractures are pronounced, and surface wettability varies significantly. However, there is a limited understanding of how water invasion behavior in partially filled fractures affects the gas produced by these fractures. In this study, a high-temperature and high-pressure contact angle testing device was employed to assess the wettability of coal seams under in situ conditions. The geometry of partially filled fractures was reconstructed using random functions, while the phase field method was employed to calculate the interactions at the two-phase interface during water invasion. The results indicate that the deep coal seams in the Ordos Basin demonstrate weak air-wetting properties under in situ conditions. The partially contact characteristics of the filled fractures in the deep coal seams categorize the fractures into distinct pore and throat regions. The variations in connectivity levels lead to the gas exhibiting uninvaded, clustered, and fully invaded characteristics following water invasion. The change in gas saturation during water invasion is more sensitive to larger values of lgCa and higher cos(θ). A larger displacement pressure difference and a smaller contact angle enable the invasion fluid to penetrate smaller throats, resulting in a higher number of clusters of residual gas and a smaller cluster radius. The results enhance our understanding of water invasion behavior, and the variability of fracture surface properties and gas-water two-phase flow in deep coal seams deserves further investigation.
- 1 November 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (11)
Water invasion and residual gas distribution in partially filled fractures via phase-field method
Water invasion is a significant factor affecting the conductivity of fractures in coal seams. The partially contact characteristics of deep coal seam fractures are pronounced, and surface wettability varies significantly. However, there is a limited understanding of how water invasion behavior in partially filled fractures affects the gas produced by these fractures. In this study, a high-temperature and high-pressure contact angle testing device was employed to assess the wettability of coal seams under in situ conditions. The geometry of partially filled fractures was reconstructed using random functions, while the phase field method was employed to calculate the interactions at the two-phase interface during water invasion. The results indicate that the deep coal seams in the Ordos Basin demonstrate weak air-wetting properties under in situ conditions. The partially contact characteristics of the filled fractures in the deep coal seams categorize the fractures into distinct pore and throat regions. The variations in connectivity levels lead to the gas exhibiting uninvaded, clustered, and fully invaded characteristics following water invasion. The change in gas saturation during water invasion is more sensitive to larger values of lgCa and higher cos(θ). A larger displacement pressure difference and a smaller contact angle enable the invasion fluid to penetrate smaller throats, resulting in a higher number of clusters of residual gas and a smaller cluster radius. The results enhance our understanding of water invasion behavior, and the variability of fracture surface properties and gas-water two-phase flow in deep coal seams deserves further investigation.