Yunan Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yunan Sun has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Hongwen Yang
Beijing University of Posts and Telecommunications
7 shared publications - Hao Xu
Beijing University of Posts and Telecommunications
5 shared publications - Chongjun Ouyang
School of Electrical and Electronic Engineering, University College Dublin, Dublin, Ireland
4 shared publications - Boyu Ning
National Key Laboratory of Wireless Communications, University of Electronic Science and Technology of China (UESTC), Chengdu, China
2 shared publications - Zequan Wang
Beijing University of Posts and Telecommunications
2 shared publications - Jiayi Li
School of Information and Communication Engineering, Beijing University of Posts and Telecommunications, Beijing, China
1 shared publication
Latest Publications
- 29 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (7) , 14364-14377
Rotatable Array-Aided Hybrid Beamforming for Integrated Sensing and Communication
Six-dimensional movable antenna (6-DMA) technology has been proposed to enhance the performance of integrated sensing and communication (ISAC) systems, but its increased implementation complexity poses significant challenges due to the extensive modifications required to existing base station infrastructures. In recent years, rotatable antenna has emerged as a promising technology, offering great potential for improving both wireless communication and sensing performance by flexibly adjusting the directional antenna’s pointing. However, current research on rotatable antennas is still in its infancy, with the focus primarily on wireless communication systems, and its application has not yet been extended to ISAC systems. As a representative application of a rotatable antenna, the rotatable array (RA) is more practically meaningful and implementable in engineering practice. In addition, the subconnected structure in hybrid beamforming, where each radio frequency chain is connected to only a subset of antenna elements, offers higher energy efficiency and is easier to realize in practice. Given this, this article focuses on a channel model that accounts for the efficiency of the antenna radiation pattern and studies the subconnected hybrid beamforming design for a multiuser RA-aided ISAC system, aiming to reduce hardware cost and complexity while improving communication rate and sensing accuracy. Aiming at the nonconvex nature with coupled variables in this problem, this article transforms the complex fractional objective function using the fractional programming (FP) method, and then proposes an algorithm based on the alternating optimization (AO) framework, which achieves optimization by alternately solving five subproblems. Extensive simulation results demonstrate the effectiveness of the proposed RA-aided hybrid beamforming design method. It not only significantly improves the overall system performance while reducing hardware costs, but also achieves performance comparable to that of the fully digital beamforming design with fixed-position antennas (FPAs) under specific parameter configurations.
- 29 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (7) , 14364-14377
Rotatable Array-Aided Hybrid Beamforming for Integrated Sensing and Communication
Six-dimensional movable antenna (6-DMA) technology has been proposed to enhance the performance of integrated sensing and communication (ISAC) systems, but its increased implementation complexity poses significant challenges due to the extensive modifications required to existing base station infrastructures. In recent years, rotatable antenna has emerged as a promising technology, offering great potential for improving both wireless communication and sensing performance by flexibly adjusting the directional antenna’s pointing. However, current research on rotatable antennas is still in its infancy, with the focus primarily on wireless communication systems, and its application has not yet been extended to ISAC systems. As a representative application of a rotatable antenna, the rotatable array (RA) is more practically meaningful and implementable in engineering practice. In addition, the subconnected structure in hybrid beamforming, where each radio frequency chain is connected to only a subset of antenna elements, offers higher energy efficiency and is easier to realize in practice. Given this, this article focuses on a channel model that accounts for the efficiency of the antenna radiation pattern and studies the subconnected hybrid beamforming design for a multiuser RA-aided ISAC system, aiming to reduce hardware cost and complexity while improving communication rate and sensing accuracy. Aiming at the nonconvex nature with coupled variables in this problem, this article transforms the complex fractional objective function using the fractional programming (FP) method, and then proposes an algorithm based on the alternating optimization (AO) framework, which achieves optimization by alternately solving five subproblems. Extensive simulation results demonstrate the effectiveness of the proposed RA-aided hybrid beamforming design method. It not only significantly improves the overall system performance while reducing hardware costs, but also achieves performance comparable to that of the fully digital beamforming design with fixed-position antennas (FPAs) under specific parameter configurations.
- 4 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (11) , 2621-2625
Beam Selection for RIS-Aided Uplink mmWave MU-MIMO Systems
Conventional multi-antenna millimeter wave (mmWave) systems suffer from high hardware costs, high power consumption, and vulnerability to signal blockage. To address these issues, this letter investigates a reconfigurable intelligent surface (RIS)-aided mmWave multiuser multiple-input multiple-output (MU-MIMO) system incorporating beam selection, aiming to maximize the uplink sum-rate. An efficient algorithm based on the block coordinate descent (BCD) and weighted minimum mean square error (WMMSE) framework is proposed to jointly optimize the active beamforming at user terminals (UTs), the passive beamforming at the RIS, and the beam selection matrix at the base station (BS). Numerical results demonstrate that the proposed algorithm significantly outperforms existing baselines in sum-rate performance.
- 4 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (11) , 2621-2625
Beam Selection for RIS-Aided Uplink mmWave MU-MIMO Systems
Conventional multi-antenna millimeter wave (mmWave) systems suffer from high hardware costs, high power consumption, and vulnerability to signal blockage. To address these issues, this letter investigates a reconfigurable intelligent surface (RIS)-aided mmWave multiuser multiple-input multiple-output (MU-MIMO) system incorporating beam selection, aiming to maximize the uplink sum-rate. An efficient algorithm based on the block coordinate descent (BCD) and weighted minimum mean square error (WMMSE) framework is proposed to jointly optimize the active beamforming at user terminals (UTs), the passive beamforming at the RIS, and the beam selection matrix at the base station (BS). Numerical results demonstrate that the proposed algorithm significantly outperforms existing baselines in sum-rate performance.
- 15 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. PP, 1
Rotatable and Movable Antenna-Enabled Near-Field Integrated Sensing and Communication
The aim of this article is to investigate the performance of near-field integrated sensing and communication (ISAC) systems using rotatable movable antennas (RMAs). In the proposed RMA-enabled system, the positions and rotations of antennas at the base station (BS) are dynamically adjusted to enhance both communication and sensing capabilities. Two designs are explored: i) a sensing-centric design that minimizes the Cramér-Rao bound (CRB) with signal-to-interference-plus-noise ratio (SINR) constraints, and ii) a communication-centric design that maximizes the sum-rate with a CRB constraint. To solve the formulated optimization problems, two alternating optimization (AO)-based algorithms are proposed capitalizing on the semidefinite relaxation (SDR) method and the particle swarm optimization (PSO) method. Numerical results demonstrate that: i) the proposed RMA-enabled system outperforms the conventional fixed-position antenna and non-rotatable movable antenna systems in both sensing-centric and communication-centric designs and RMAs’ rotations show a higher performance gain in communication-centric design; ii) the proposed optimization methods achieve the Pareto boundary in both sensing-centric and communication-centric designs.
- 15 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. PP, 1
Rotatable and Movable Antenna-Enabled Near-Field Integrated Sensing and Communication
The aim of this article is to investigate the performance of near-field integrated sensing and communication (ISAC) systems using rotatable movable antennas (RMAs). In the proposed RMA-enabled system, the positions and rotations of antennas at the base station (BS) are dynamically adjusted to enhance both communication and sensing capabilities. Two designs are explored: i) a sensing-centric design that minimizes the Cramér-Rao bound (CRB) with signal-to-interference-plus-noise ratio (SINR) constraints, and ii) a communication-centric design that maximizes the sum-rate with a CRB constraint. To solve the formulated optimization problems, two alternating optimization (AO)-based algorithms are proposed capitalizing on the semidefinite relaxation (SDR) method and the particle swarm optimization (PSO) method. Numerical results demonstrate that: i) the proposed RMA-enabled system outperforms the conventional fixed-position antenna and non-rotatable movable antenna systems in both sensing-centric and communication-centric designs and RMAs’ rotations show a higher performance gain in communication-centric design; ii) the proposed optimization methods achieve the Pareto boundary in both sensing-centric and communication-centric designs.
- 20 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (4) , 824-828
STAR-RIS Aided Communication System With Movable Antennas Exploiting Statistical CSI
Simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) and movable antenna (MA) are two promising technologies to reshape wireless channels and improve communication performance. To reap their synergic gains, this letter investigates a STAR-RIS aided communication system with MAs to maximize the ergodic sum-rate of multiple users by exploiting statistical channel state information (CSI). To tackle this problem, an efficient algorithm based on the alternating optimization (AO) and fractional programming (FP) framework is proposed to jointly optimize the transmission and reflection coefficients (TRCs) at the STAR-RIS, the beamformer, and the positions of MAs at base station. Numerical results show that each individual technology has a limited control over the wireless channel conditions, but combining STAR-RIS and MA can further boost the ergodic sum-rate.
- 20 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 29 (4) , 824-828
STAR-RIS Aided Communication System With Movable Antennas Exploiting Statistical CSI
Simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) and movable antenna (MA) are two promising technologies to reshape wireless channels and improve communication performance. To reap their synergic gains, this letter investigates a STAR-RIS aided communication system with MAs to maximize the ergodic sum-rate of multiple users by exploiting statistical channel state information (CSI). To tackle this problem, an efficient algorithm based on the alternating optimization (AO) and fractional programming (FP) framework is proposed to jointly optimize the transmission and reflection coefficients (TRCs) at the STAR-RIS, the beamformer, and the positions of MAs at base station. Numerical results show that each individual technology has a limited control over the wireless channel conditions, but combining STAR-RIS and MA can further boost the ergodic sum-rate.
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (4) , 6773-6778
Reconfigurable Intelligent Surfaces Assisted Multicast Transmissions With Finite-Alphabet Inputs
Given its ability to intelligently modify the wireless propagation environment, reconfigurable intelligent surface (RIS) emerges as a promising technology to enhance the capacity of multicast systems. This paper analyzes the ergodic rate (ER) of a RIS-assisted multicast system with finite-alphabet inputs by exploiting only statistical channel state information. To reveal important insights for system design, asymptotic analyses are performed on the ER in the region of high signal-to-noise ratio (SNR). It is observed that the ER converges to some constant in the high-SNR regime and the convergence rate is influenced by the diversity order and the array gain. On this basis, a novel array gain maximization problem is formulated, and two efficient algorithms are proposed to improve the array gain and the ER. Numerical results are presented to verify the accuracy of the derived results and the effectiveness of the proposed methods.
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (4) , 6773-6778
Reconfigurable Intelligent Surfaces Assisted Multicast Transmissions With Finite-Alphabet Inputs
Given its ability to intelligently modify the wireless propagation environment, reconfigurable intelligent surface (RIS) emerges as a promising technology to enhance the capacity of multicast systems. This paper analyzes the ergodic rate (ER) of a RIS-assisted multicast system with finite-alphabet inputs by exploiting only statistical channel state information. To reveal important insights for system design, asymptotic analyses are performed on the ER in the region of high signal-to-noise ratio (SNR). It is observed that the ER converges to some constant in the high-SNR regime and the convergence rate is influenced by the diversity order and the array gain. On this basis, a novel array gain maximization problem is formulated, and two efficient algorithms are proposed to improve the array gain and the ER. Numerical results are presented to verify the accuracy of the derived results and the effectiveness of the proposed methods.
- Top Cited Papers
- 29 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 14 (2) , 450-454
Sum-Rate Optimization for RIS-Aided Multiuser Communications With Movable Antennas
Reconfigurable intelligent surfaces (RIS) are recognized as a promising technology for enhancing wireless communication network performance. Meanwhile, movable antennas (MAs) are recently an emerging technology that optimizes antennas’ positions to boost channel capacity. This letter considers a novel RIS-aided multiuser communication system empowered by MAs. Our goal is to characterize the performance of MA-based RIS-aided systems by jointly optimizing the reflection coefficients of the RIS, the positions of MAs, and the beamforming matrix at the base station (BS). To this end, an efficient algorithm is proposed to solve the resultant non-convex problem by fractional programming techniques. Numerical results are provided to validate the effectiveness of our proposed algorithm and demonstrate the superiority of the MA-based RIS-aided systems compared to the conventional RIS-aided ones with fixed-position antennas (FPAs).
- 29 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 14 (2) , 450-454
Top Cited PapersSum-Rate Optimization for RIS-Aided Multiuser Communications With Movable Antennas
Reconfigurable intelligent surfaces (RIS) are recognized as a promising technology for enhancing wireless communication network performance. Meanwhile, movable antennas (MAs) are recently an emerging technology that optimizes antennas’ positions to boost channel capacity. This letter considers a novel RIS-aided multiuser communication system empowered by MAs. Our goal is to characterize the performance of MA-based RIS-aided systems by jointly optimizing the reflection coefficients of the RIS, the positions of MAs, and the beamforming matrix at the base station (BS). To this end, an efficient algorithm is proposed to solve the resultant non-convex problem by fractional programming techniques. Numerical results are provided to validate the effectiveness of our proposed algorithm and demonstrate the superiority of the MA-based RIS-aided systems compared to the conventional RIS-aided ones with fixed-position antennas (FPAs).