Z. Ansar Ali
Research Subjects
Z. Ansar Ali has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Parappurath Narayanan Sudha
Department of Physiology, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai, Tamil Nadu, India
3 shared publications - P. Supriya Prasad
Department of Chemistry, Muthurangam Government Arts College, Vellore, Tamil Nadu, India
2 shared publications - R. Suresh
Department of Chemistry, Government Polytechnic College, Nagapadi, Tiruvannamalai, Tamil Nadu, India
2 shared publications T. N. Balaji
Department of Chemistry, PERI Institute of Technology, Mannivakkam, Chennai, Tamil Nadu, India
2 shared publications- A. Rekha
Department of Microbiology, DKM College for Women (Autonomous), Vellore-632001, India
1 shared publication - G. Lavanya
Department of Chemistry, Department of Chemistry, Saveetha Engineering College, Tandalam, Chennai-602105, India
1 shared publication
Latest Publications
- Open Access
- 31 August 2026
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 4 (42) , 1325
Development of a Novel CMC/f-GO-Glu Composite for Heavy Metal Remediation: Antioxidant, Antimicrobial, and Adsorption Studies
The present study focuses on the development of a carboxymethyl chitosan-functionalized graphene oxide (CMC/f-GO-Glu) composite for the enhanced removal of heavy metals like copper and chromium from aqueous solutions. Graphene oxide (GO) was synthesized using a modified Hummers' method and further functionalized with carboxylic acid groups. The CMC/f-GO-Glu composite was prepared by crosslinking carboxymethyl chitosan with functionalized graphene oxide using glutaraldehyde. The synthesized composite was characterized using FT-IR, XRD, and SEM techniques. The adsorption capacity of the CMC/f-GO-Glu composite towards copper and chromium was investigated through batch adsorption studies under optimized conditions. The composite exhibited excellent antioxidant and antimicrobial properties. Batch adsorption experiments revealed that the adsorption of both metals was highly dependent on pH, adsorbent dosage, contact time, and initial metal ion concentration. The Freundlich isotherm model fit the equilibrium data quite well, indicating multilayer adsorption. The Freundlich isotherm model fit the equilibrium data quite well. The adsorption mechanism was found to be dominated by chemical interactions such as electrostatic forces and coordinate bonding, along with the influence of the composite's chemical structure and intermolecular interactions. Desorption studies confirmed the reusability of the CMC/f-GO-Glu composite without significant loss in adsorption efficiency. The results demonstrate the potential of the CMC/f-GO-Glu composite as an excellent adsorbent to extract heavy metals from aqueous solutions, with promising applications in environmental remediation.
- 31 August 2026
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 4 (42) , 1325
Open AccessDevelopment of a Novel CMC/f-GO-Glu Composite for Heavy Metal Remediation: Antioxidant, Antimicrobial, and Adsorption Studies
The present study focuses on the development of a carboxymethyl chitosan-functionalized graphene oxide (CMC/f-GO-Glu) composite for the enhanced removal of heavy metals like copper and chromium from aqueous solutions. Graphene oxide (GO) was synthesized using a modified Hummers' method and further functionalized with carboxylic acid groups. The CMC/f-GO-Glu composite was prepared by crosslinking carboxymethyl chitosan with functionalized graphene oxide using glutaraldehyde. The synthesized composite was characterized using FT-IR, XRD, and SEM techniques. The adsorption capacity of the CMC/f-GO-Glu composite towards copper and chromium was investigated through batch adsorption studies under optimized conditions. The composite exhibited excellent antioxidant and antimicrobial properties. Batch adsorption experiments revealed that the adsorption of both metals was highly dependent on pH, adsorbent dosage, contact time, and initial metal ion concentration. The Freundlich isotherm model fit the equilibrium data quite well, indicating multilayer adsorption. The Freundlich isotherm model fit the equilibrium data quite well. The adsorption mechanism was found to be dominated by chemical interactions such as electrostatic forces and coordinate bonding, along with the influence of the composite's chemical structure and intermolecular interactions. Desorption studies confirmed the reusability of the CMC/f-GO-Glu composite without significant loss in adsorption efficiency. The results demonstrate the potential of the CMC/f-GO-Glu composite as an excellent adsorbent to extract heavy metals from aqueous solutions, with promising applications in environmental remediation.
- Open Access
- 28 February 2025
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 41 (1) , 169-177
The Beneficial Effect of Chitosan - Biochar Blend on the Biosorptive Removal of Heavy Metal Copper from Aqueous Solution
The present study investigates the efficacy of a biochar-chitosan blend in biosorptive elimination of copper from an water. Biochar was prepared from corncob waste by pyrolysis at 600°C under a nitrogen atmosphere and blended with a chitosan solution. The prepared chitosan-biochar (CS-BC) blend was characterized using FTIR, XRD, BET, and SEM analyses. Adsorption tests in batches were carried out to evaluate the adsorption capacity of the CS-BC blend for Cu(II) ions, considering several variables, including pH, starting metal concentration, contact time, and adsorbent dose. The optimal pH for Cu(II) adsorption was found to be 5, having the highest sorption of 313.97mg/g. The adsorption capacity increased with increasing adsorbent dosage up to 4 grams and contact time up to 480 minutes. Adsorption isotherm studies revealed that the adsorption process was best explained by the Freundlich model indicating multilayer sorption. According to kinetic analyses, the pseudo-second-order adsorption process was followed. Desorption studies using 0.1M HCl demonstrated a high regeneration capacity of the CS-BC blend, with up to 99% recovery of Cu(II) ions. The results suggest that the chitosan-biochar blend is an effective and economically viable adsorbent for extracting copper, a heavy metal, from water-based solutions.
- 28 February 2025
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 41 (1) , 169-177
Open AccessThe Beneficial Effect of Chitosan - Biochar Blend on the Biosorptive Removal of Heavy Metal Copper from Aqueous Solution
The present study investigates the efficacy of a biochar-chitosan blend in biosorptive elimination of copper from an water. Biochar was prepared from corncob waste by pyrolysis at 600°C under a nitrogen atmosphere and blended with a chitosan solution. The prepared chitosan-biochar (CS-BC) blend was characterized using FTIR, XRD, BET, and SEM analyses. Adsorption tests in batches were carried out to evaluate the adsorption capacity of the CS-BC blend for Cu(II) ions, considering several variables, including pH, starting metal concentration, contact time, and adsorbent dose. The optimal pH for Cu(II) adsorption was found to be 5, having the highest sorption of 313.97mg/g. The adsorption capacity increased with increasing adsorbent dosage up to 4 grams and contact time up to 480 minutes. Adsorption isotherm studies revealed that the adsorption process was best explained by the Freundlich model indicating multilayer sorption. According to kinetic analyses, the pseudo-second-order adsorption process was followed. Desorption studies using 0.1M HCl demonstrated a high regeneration capacity of the CS-BC blend, with up to 99% recovery of Cu(II) ions. The results suggest that the chitosan-biochar blend is an effective and economically viable adsorbent for extracting copper, a heavy metal, from water-based solutions.
- Open Access
- 30 November 2024
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 36 (12) , 2961-2966
Phytoextraction of Heavy Metals: Assessing the Potential of Brassica juncea in Heavy Metals (Copper and Cadmium) from Contaminated Soils
This study investigated the phytoremediation potential of Brassica juncea in copper and cadmium contaminated soils. B. juncea, a fast-growing, high-biomass-producing plant, has been shown to tolerate and accumulate heavy metals. This study aimed to assess the effectiveness of B. juncea in removing copper and cadmium from contaminated soils and to evaluate the morphophysiological and biochemical responses of the plant to metal stress. Soil samples with varying concentrations of copper and cadmium were prepared and B. juncea was grown in these soils under controlled conditions. Plant growth parameters, metal accumulation in plant tissues and biochemical stress markers were analyzed. The results showed the potential use of B. juncea for the phytoremediation of copper and cadmium contaminated soils. The presence of heavy metals had a direct effect on the biochemical parameters, growth performance, and the antioxidant enzymes of the plant. At the same time, the plant seemed to tolerate the metal stress and accumulate, which helped in the extraction of metals from soils. The current study contributes to the development of sustainable strategies for the remediation of the metal-polluted sites.
- 30 November 2024
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 36 (12) , 2961-2966
Open AccessPhytoextraction of Heavy Metals: Assessing the Potential of Brassica juncea in Heavy Metals (Copper and Cadmium) from Contaminated Soils
This study investigated the phytoremediation potential of Brassica juncea in copper and cadmium contaminated soils. B. juncea, a fast-growing, high-biomass-producing plant, has been shown to tolerate and accumulate heavy metals. This study aimed to assess the effectiveness of B. juncea in removing copper and cadmium from contaminated soils and to evaluate the morphophysiological and biochemical responses of the plant to metal stress. Soil samples with varying concentrations of copper and cadmium were prepared and B. juncea was grown in these soils under controlled conditions. Plant growth parameters, metal accumulation in plant tissues and biochemical stress markers were analyzed. The results showed the potential use of B. juncea for the phytoremediation of copper and cadmium contaminated soils. The presence of heavy metals had a direct effect on the biochemical parameters, growth performance, and the antioxidant enzymes of the plant. At the same time, the plant seemed to tolerate the metal stress and accumulate, which helped in the extraction of metals from soils. The current study contributes to the development of sustainable strategies for the remediation of the metal-polluted sites.