Svetlana Polavder
Svetlana Polavder has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Dragan Milošević
Rudarski institut d.o.o. Beograd
3 shared publications - Tanja Miladinović
Rudarski institut d.o.o. Beograd
3 shared publications - Dragana Savić
Rudarski institut Beograd
2 shared publications - Jasmina Nešković
Mining Institute, Batajnicki Put 2, 11080 Belgrade, Serbia
2 shared publications - Sandra Petković Papalazarou
Mining Institute Belgrade, 11080 Belgrade, Serbia
2 shared publications - Sanja Grujičić2 shared publications
Latest Publications
- 26 May 2025
- Published by Association of Metallurgical Engineers of Serbia in Metallurgical & Materials Engineering Congress of South-East Europe
- Vol. 6 (1)
RESOURCE FROM RECOVERY FGD GYPSUM: ADDRESSING ENVIRONMENTAL RISKS OF HAZARDOUS TRACE ELEMENTS FOR SAFER REUSE
Flue gas desulfurization (FGD) gypsum, a by-product of coal-fired power plants, offers potential for recycling, particularly in the construction industry and agricultural applications. Its abundant availability and favorable physical properties make it an attractive alternative to natural gypsum. However, the presence of hazardous trace elements (HTEs) such as arsenic (As), cadmium (Cd), chromium (Cr), and zinc (Zn) can pose significant challenges for safe reuse. These elements may leach into the environment, especially under certain chemical or physical conditions, leading to contamination of soil and groundwater. This study explores the speciation and leaching behavior of ten HTEs (As, Cd, Cr, Pb, Cu, Ni, V, Zn, Sb, and Co) in FGD gypsum samples collected from power plants in Serbia, aiming to inform strategies for safer recycling and more sustainable waste management. The results indicate that certain elements, notably As, Cd, and Cr, exist in forms that are highly soluble and bioavailable, suggesting a considerable risk of leaching during use, storage, or landfilling. For instance, As is found in easily soluble fractions in concentrations ranging from 19.8% to 32.5%, while Cr shows a particularly high proportion (70.6%–91.3%) in fractions susceptible to release under environmental conditions. Cd also exhibits a high share in soluble form (31.3%–49.4%), further increasing its environmental mobility. While overall leaching tests suggest that FGD gypsum can be classified as non-hazardous waste, the variability in the mobility of individual elements highlights the importance of targeted risk management. Elements such as Cd, As, and Cr fall within medium to high environmental risk categories and require careful monitoring in any recycling or reuse context.
- 26 May 2025
- Published by Association of Metallurgical Engineers of Serbia in Metallurgical & Materials Engineering Congress of South-East Europe
- Vol. 6 (1)
RESOURCE FROM RECOVERY FGD GYPSUM: ADDRESSING ENVIRONMENTAL RISKS OF HAZARDOUS TRACE ELEMENTS FOR SAFER REUSE
Flue gas desulfurization (FGD) gypsum, a by-product of coal-fired power plants, offers potential for recycling, particularly in the construction industry and agricultural applications. Its abundant availability and favorable physical properties make it an attractive alternative to natural gypsum. However, the presence of hazardous trace elements (HTEs) such as arsenic (As), cadmium (Cd), chromium (Cr), and zinc (Zn) can pose significant challenges for safe reuse. These elements may leach into the environment, especially under certain chemical or physical conditions, leading to contamination of soil and groundwater. This study explores the speciation and leaching behavior of ten HTEs (As, Cd, Cr, Pb, Cu, Ni, V, Zn, Sb, and Co) in FGD gypsum samples collected from power plants in Serbia, aiming to inform strategies for safer recycling and more sustainable waste management. The results indicate that certain elements, notably As, Cd, and Cr, exist in forms that are highly soluble and bioavailable, suggesting a considerable risk of leaching during use, storage, or landfilling. For instance, As is found in easily soluble fractions in concentrations ranging from 19.8% to 32.5%, while Cr shows a particularly high proportion (70.6%–91.3%) in fractions susceptible to release under environmental conditions. Cd also exhibits a high share in soluble form (31.3%–49.4%), further increasing its environmental mobility. While overall leaching tests suggest that FGD gypsum can be classified as non-hazardous waste, the variability in the mobility of individual elements highlights the importance of targeted risk management. Elements such as Cd, As, and Cr fall within medium to high environmental risk categories and require careful monitoring in any recycling or reuse context.
- Open Access
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 80 (2) , 161-167
Geotechnical research for wind turbine locations on the site of the "Crni vrh" wind power plant
With the increase in the production of "green" energy in the world, that trend has also arrived in Serbia, so "WPP Crni vrh" is a high-capacity wind power plant where electricity will be produced and delivered to end consumers via the planned transmission lines, which will increase the reliability and security in suppling electricity to consumers in the territory of the municipalities of Žagubica and Majdanpek and the city of Bor. When designing a wind power plant, it is very important to determine the geomechanical structure of the terrain, which determines the method of foundation (shallow or deep) of the wind turbine. Due to the high height of the column (125 m), the effect of wind is the dominant load on wind turbines. Due to its stochastic nature, as well as due to the frequent absence of a primary direction of action, the foundation rates are intended to be circular for the largest number of wind turbine positions. In addition, the circular shape is significantly more practical from the point of view of execution, and generally superior from the aspect of behavior (performance). In two locations, due to the combination of the relatively unfavorable position of the wind turbine in relation to the slope of the slope, the stratigraphy of the terrain and the geotechnical characteristics of the lithological layers represented, the solution of deep foundations on "standing" piles was adopted. The paper shows the way of presenting the results of geological, geomorphological, engineering geological and geomechanical laboratory tests, using the example of the selected location of the TI-12 wind turbine within the "wind power plant "Crni vrh.
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Tehnika
- Vol. 80 (2) , 161-167
Open AccessGeotechnical research for wind turbine locations on the site of the "Crni vrh" wind power plant
With the increase in the production of "green" energy in the world, that trend has also arrived in Serbia, so "WPP Crni vrh" is a high-capacity wind power plant where electricity will be produced and delivered to end consumers via the planned transmission lines, which will increase the reliability and security in suppling electricity to consumers in the territory of the municipalities of Žagubica and Majdanpek and the city of Bor. When designing a wind power plant, it is very important to determine the geomechanical structure of the terrain, which determines the method of foundation (shallow or deep) of the wind turbine. Due to the high height of the column (125 m), the effect of wind is the dominant load on wind turbines. Due to its stochastic nature, as well as due to the frequent absence of a primary direction of action, the foundation rates are intended to be circular for the largest number of wind turbine positions. In addition, the circular shape is significantly more practical from the point of view of execution, and generally superior from the aspect of behavior (performance). In two locations, due to the combination of the relatively unfavorable position of the wind turbine in relation to the slope of the slope, the stratigraphy of the terrain and the geotechnical characteristics of the lithological layers represented, the solution of deep foundations on "standing" piles was adopted. The paper shows the way of presenting the results of geological, geomorphological, engineering geological and geomechanical laboratory tests, using the example of the selected location of the TI-12 wind turbine within the "wind power plant "Crni vrh.
- Open Access
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Papers,p. 190-195
Landfill for combustion products from the Kostolac thermoelectron
The implementation of measures and activities aimed at preserving the environment is preceded by the categorization of products created by the application of technological processes. The emission of harmful substances within the limit prescribed values is defined by the valid legislation of the Republic of Serbia. The development of project documentation for the disposal of ash, slag and gypsum from the technological process of flue gas desulphurization (FGD) must be based on the application of modern technologies in order to preserve the surrounding ecosystem. The planning of the landfill space for the accommodation of combustion and desulfurization products requires the analysis of all input parameters of the technological process of electricity production. The use of ash, slag and gypsum as products of the production process of thermal power plants is not adequately accepted in the domestic industry. The role of new technologies should be directed towards the greatest possible utilization of stored products in order to produce new products, thus preserving mineral resources and protecting the conditions of the living environment.
- 1 January 2025
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Papers,p. 190-195
Open AccessLandfill for combustion products from the Kostolac thermoelectron
The implementation of measures and activities aimed at preserving the environment is preceded by the categorization of products created by the application of technological processes. The emission of harmful substances within the limit prescribed values is defined by the valid legislation of the Republic of Serbia. The development of project documentation for the disposal of ash, slag and gypsum from the technological process of flue gas desulphurization (FGD) must be based on the application of modern technologies in order to preserve the surrounding ecosystem. The planning of the landfill space for the accommodation of combustion and desulfurization products requires the analysis of all input parameters of the technological process of electricity production. The use of ash, slag and gypsum as products of the production process of thermal power plants is not adequately accepted in the domestic industry. The role of new technologies should be directed towards the greatest possible utilization of stored products in order to produce new products, thus preserving mineral resources and protecting the conditions of the living environment.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Papers,p. 243-249
Correlative analysis of geological exploration results for solar power plants at mine waste dumps
Optimization of field geological, geotechnical exploration and laboratory tests in order to design solar power plants in areas larger than 10 ha and in anthropogenic environments (mine waste dumps or flotation waste dumps) is imposed as a primary goal for researchers, explorers and designers. How to cover with the required number of exploration and laboratory works, the exploration area for the construction of a solar power plant, which is in most cases heterogeneous, in terms of lithological composition, physical and mechanical properties and chemical characteristics? In these cases, geotechnical studies are very complex, with a multidisciplinary approach to the analysis of the subject site for construction, in compliance with the current legislation, regulations, norms and standards. In order to optimize the designed methods in exploration areas intended for the construction of photovoltaic plants, and bearing in mind the fact that thermal conductivity depends on the type of soil, humidity and temperature, the obtained results of geophysical tests were correlated with the results of chemical analyses performed on soil samples from exploration boreholes (pH and SO4 2 -) performed at mining waste dumps. The paper presents correlative analyses of the results of geophysical tests and chemical analyses from 5 locations of mine waste dumps in the vicinity of Bor and Majdanpek, which are intended for construction of solar power plants.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Papers,p. 243-249
Open AccessCorrelative analysis of geological exploration results for solar power plants at mine waste dumps
Optimization of field geological, geotechnical exploration and laboratory tests in order to design solar power plants in areas larger than 10 ha and in anthropogenic environments (mine waste dumps or flotation waste dumps) is imposed as a primary goal for researchers, explorers and designers. How to cover with the required number of exploration and laboratory works, the exploration area for the construction of a solar power plant, which is in most cases heterogeneous, in terms of lithological composition, physical and mechanical properties and chemical characteristics? In these cases, geotechnical studies are very complex, with a multidisciplinary approach to the analysis of the subject site for construction, in compliance with the current legislation, regulations, norms and standards. In order to optimize the designed methods in exploration areas intended for the construction of photovoltaic plants, and bearing in mind the fact that thermal conductivity depends on the type of soil, humidity and temperature, the obtained results of geophysical tests were correlated with the results of chemical analyses performed on soil samples from exploration boreholes (pH and SO4 2 -) performed at mining waste dumps. The paper presents correlative analyses of the results of geophysical tests and chemical analyses from 5 locations of mine waste dumps in the vicinity of Bor and Majdanpek, which are intended for construction of solar power plants.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Papers,p. 250-256
The significance of geological research in the function of surface exploitation of mineral raw materials
The exploration of mineral resources is carried out according to the current legislation, on the basis of which the potential of the area is determined. It is carried out using geological, hydrogeological methods, engineering - geological research, using surface and underground research works and other tests. Research, exploitation and primary processing of mineral raw materials takes place in a certain period of time and under the influence of very different influences. In modern conditions, mines are subject to purchase and sale, and deposits of mineral raw materials are subject to concessions, so their value is determined by the amount of profit, which is obtained by exploitation in a certain period of time. In this context, geological research represents one of the very important input parameters for the process of exploitation of mineral raw materials.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Papers,p. 250-256
Open AccessThe significance of geological research in the function of surface exploitation of mineral raw materials
The exploration of mineral resources is carried out according to the current legislation, on the basis of which the potential of the area is determined. It is carried out using geological, hydrogeological methods, engineering - geological research, using surface and underground research works and other tests. Research, exploitation and primary processing of mineral raw materials takes place in a certain period of time and under the influence of very different influences. In modern conditions, mines are subject to purchase and sale, and deposits of mineral raw materials are subject to concessions, so their value is determined by the amount of profit, which is obtained by exploitation in a certain period of time. In this context, geological research represents one of the very important input parameters for the process of exploitation of mineral raw materials.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Papers,p. 96-102
Modeling of the Kovin coal deposit in the function of making mining projects
Modern design of surface exploitation of mineral deposits is preceded by modeling (or digital representation) of the deposit, which in the form of defined terrain planes and geological layers, profiles and quantities is the basis for planning mining works. On the world market, there are many software packages intended for deposit modeling, with a similar working principle and end result. Based on the results of exploratory drilling, a deposit database is formed, which is further processed according to certain criteria and a deposit model is created. SOL or Deposit Processing System was developed at the Mining Institute in the 80s. The feature of this program package is that it models the deposit in a simple and efficient way from the database and provides designers with reliable bases, in the form of AutoCAD files, for further design.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Papers,p. 96-102
Open AccessModeling of the Kovin coal deposit in the function of making mining projects
Modern design of surface exploitation of mineral deposits is preceded by modeling (or digital representation) of the deposit, which in the form of defined terrain planes and geological layers, profiles and quantities is the basis for planning mining works. On the world market, there are many software packages intended for deposit modeling, with a similar working principle and end result. Based on the results of exploratory drilling, a deposit database is formed, which is further processed according to certain criteria and a deposit model is created. SOL or Deposit Processing System was developed at the Mining Institute in the 80s. The feature of this program package is that it models the deposit in a simple and efficient way from the database and provides designers with reliable bases, in the form of AutoCAD files, for further design.
- 1 January 2022
- Published by Scientific-Professional Society for Disaster Risk Management in Ecologica
- Vol. 29 (106) , 185-192
Potencijalni uslovi ekoturizma u industrijskoj oblasti Kostolca
- 1 January 2022
- Published by Scientific-Professional Society for Disaster Risk Management in Ecologica
- Vol. 29 (106) , 185-192
Potencijalni uslovi ekoturizma u industrijskoj oblasti Kostolca