Shiqi Fan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Shiqi Fan has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Guihui Ma
College of Shipbuilding Engineering, Harbin Engineering University 1 , Harbin 150001
6 shared publications - Bin Zhao4 shared publications
Xiongliang Yao
4 shared publications- Chenxin Lu2 shared publications
- Jiaxing Lu
College of Shipbuilding Engineering, Harbin Engineering University, Harbin, China
2 shared publications Yuanyang Zhao
2 shared publications
Latest Publications
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Experimental study on pressure oscillation characteristics of muzzle bubble of water-exit projectile
Water-exit projectiles with high-pressure gas ejection usually form bubbles at the muzzle of the launch tube and are non-spherical. The dynamic evolution of non-spherical bubbles in the muzzle involves complex multiphase flow, which affects the pressure load distribution in the launch tube. It is found that the muzzle bubble is affected by the water body's viscous resistance, and the pressure in the bubble shows a periodic attenuation. In this paper, the damped vibration equation is introduced, and the periodic oscillation prediction model of gas pressure in the launch tube is established, which can accurately predict the periodic change of pressure in the launch tube. When the ambient pressure is constant, the increase in muzzle pressure ratio increases the bubble's internal pressure. As the internal pressure of the bubble increases, the bubble pressure oscillation frequency decreases. In addition, the muzzle bubble is affected by high turbulence, and the bubble size has high degree of uncertainty, which introduces significant dispersion in its Strouhal number. This work can serve as a reference for the structural strength design of underwater launch vehicles.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Experimental study on pressure oscillation characteristics of muzzle bubble of water-exit projectile
Water-exit projectiles with high-pressure gas ejection usually form bubbles at the muzzle of the launch tube and are non-spherical. The dynamic evolution of non-spherical bubbles in the muzzle involves complex multiphase flow, which affects the pressure load distribution in the launch tube. It is found that the muzzle bubble is affected by the water body's viscous resistance, and the pressure in the bubble shows a periodic attenuation. In this paper, the damped vibration equation is introduced, and the periodic oscillation prediction model of gas pressure in the launch tube is established, which can accurately predict the periodic change of pressure in the launch tube. When the ambient pressure is constant, the increase in muzzle pressure ratio increases the bubble's internal pressure. As the internal pressure of the bubble increases, the bubble pressure oscillation frequency decreases. In addition, the muzzle bubble is affected by high turbulence, and the bubble size has high degree of uncertainty, which introduces significant dispersion in its Strouhal number. This work can serve as a reference for the structural strength design of underwater launch vehicles.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Tail cavity kinematic characteristics and in-tube pressure behavior induced by pressure difference and pressure ratio
The development of the tail cavity is recognized as a critical factor affecting motion stability during vehicle water-exit. Investigations on tail cavity evolution and in-tube pressure characteristics under varying conditions are essential for water-exit studies. Based on experimental studies of high-pressure gas-ejected vehicles during water-exit, research was conducted on free water-exit tail cavity evolution and in-tube pressure characteristics under varying front pressure, pressure difference, and pressure ratio conditions. The pull-off formation mechanism of the tail cavity was revealed to be jointly influenced by the entrainment effects of starting vortices and necking effects during vehicle axial motion. Results indicate that tail cavity development was found to be influenced by two competing mechanisms: reentrant jet suppression effects and environmental pressure enhancement effects. Specifically, increased front pressure was observed to elevate vehicle velocity while intensifying in-tube pressure oscillations. Vehicle velocity showed a negative correlation with pressure ratio but a positive correlation with pressure difference. A positive correlation was also identified with gas average flow velocity in the gas chamber. When either pressure difference or pressure ratio was maintained constant, equivalent changes in pressure difference demonstrated a greater impact on vehicle motion velocity compared to pressure ratio adjustments.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Tail cavity kinematic characteristics and in-tube pressure behavior induced by pressure difference and pressure ratio
The development of the tail cavity is recognized as a critical factor affecting motion stability during vehicle water-exit. Investigations on tail cavity evolution and in-tube pressure characteristics under varying conditions are essential for water-exit studies. Based on experimental studies of high-pressure gas-ejected vehicles during water-exit, research was conducted on free water-exit tail cavity evolution and in-tube pressure characteristics under varying front pressure, pressure difference, and pressure ratio conditions. The pull-off formation mechanism of the tail cavity was revealed to be jointly influenced by the entrainment effects of starting vortices and necking effects during vehicle axial motion. Results indicate that tail cavity development was found to be influenced by two competing mechanisms: reentrant jet suppression effects and environmental pressure enhancement effects. Specifically, increased front pressure was observed to elevate vehicle velocity while intensifying in-tube pressure oscillations. Vehicle velocity showed a negative correlation with pressure ratio but a positive correlation with pressure difference. A positive correlation was also identified with gas average flow velocity in the gas chamber. When either pressure difference or pressure ratio was maintained constant, equivalent changes in pressure difference demonstrated a greater impact on vehicle motion velocity compared to pressure ratio adjustments.
- Top Cited Papers
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
The interaction characteristics of shoulder-tail cavities under different pressure ratios and hole ratios
The formation and development of attached cavities on the surfaces of underwater moving vehicles involve complex multiphase flows, which are critical for determining the load characteristics and motion stability of the vehicles. This study utilized experimental methods to investigate the formation process and motion characteristics of these attached cavities. Pressure sensors mounted inside the acceleration tube captured the relationship between cavity evolution and transient pressures. High-speed cameras were employed to observe the shedding morphology of the ventilated shoulder cavity, analyzing the mechanism behind its gas cutoff. The findings reveal that the negative pressure impact during the vehicle's tail exit from the tube is crucial for the gas cutoff of the shoulder ventilated cavity. Additionally, increasing the internal cavity pressure ratio significantly influences the size development of the shoulder cavity. At a constant pressure ratio, different hole ratios have a negligible effect on the axial development of the shoulder cavity. When the number of holes increases and the hole ratio decreases, it promotes the circumferential fusion of the enlarged shoulder cavity and enhances the coverage of gas on the vehicle's surface.
- 1 February 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (2)
Top Cited PapersThe interaction characteristics of shoulder-tail cavities under different pressure ratios and hole ratios
The formation and development of attached cavities on the surfaces of underwater moving vehicles involve complex multiphase flows, which are critical for determining the load characteristics and motion stability of the vehicles. This study utilized experimental methods to investigate the formation process and motion characteristics of these attached cavities. Pressure sensors mounted inside the acceleration tube captured the relationship between cavity evolution and transient pressures. High-speed cameras were employed to observe the shedding morphology of the ventilated shoulder cavity, analyzing the mechanism behind its gas cutoff. The findings reveal that the negative pressure impact during the vehicle's tail exit from the tube is crucial for the gas cutoff of the shoulder ventilated cavity. Additionally, increasing the internal cavity pressure ratio significantly influences the size development of the shoulder cavity. At a constant pressure ratio, different hole ratios have a negligible effect on the axial development of the shoulder cavity. When the number of holes increases and the hole ratio decreases, it promotes the circumferential fusion of the enlarged shoulder cavity and enhances the coverage of gas on the vehicle's surface.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Research on high-speed water entry similarity of multiscale vehicle based on two-parameter compensation of atmospheric pressure–density
The atmospheric pressure and density are important factors affecting the water entry cavity and load characteristics of the vehicle. However, it is difficult to take into account the equivalent simulation of the two in the scaled-down test. The use of atmospheric pressure–density two-parameter compensation may become a key means to achieve accurate scale similarity. In this paper, the evolution of the water entry cavity and the similarity of impact loads for multiscale models in different environments are studied. Aiming at the problem that the similarity conditions are difficult to meet in small-scale model test, a distortion compensation correction method is proposed. The results show that under normal pressure environment, as the scale ratio decreases, the cavity surface closes in advance, and the slamming load gradually decreases. Under reduced pressure environment, the influence of the “scale effect” is significantly reduced. As the pressure decreases, the cavity surface closure phenomenon is weakened, and the cushioning effect of the air cushion is reduced, resulting in an increase in the slamming load. Quantitative analysis shows that the atmospheric pressure mainly affects the pressure disturbance trend in the cavity, while the atmospheric density determines the scale of the cavity and the size of the model load. By adjusting the pressure and density parameters, the prediction deviation of the small-scale model test on the disturbance time of the prototype reentrant jet pressure can be controlled within 2.4%.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Research on high-speed water entry similarity of multiscale vehicle based on two-parameter compensation of atmospheric pressure–density
The atmospheric pressure and density are important factors affecting the water entry cavity and load characteristics of the vehicle. However, it is difficult to take into account the equivalent simulation of the two in the scaled-down test. The use of atmospheric pressure–density two-parameter compensation may become a key means to achieve accurate scale similarity. In this paper, the evolution of the water entry cavity and the similarity of impact loads for multiscale models in different environments are studied. Aiming at the problem that the similarity conditions are difficult to meet in small-scale model test, a distortion compensation correction method is proposed. The results show that under normal pressure environment, as the scale ratio decreases, the cavity surface closes in advance, and the slamming load gradually decreases. Under reduced pressure environment, the influence of the “scale effect” is significantly reduced. As the pressure decreases, the cavity surface closure phenomenon is weakened, and the cushioning effect of the air cushion is reduced, resulting in an increase in the slamming load. Quantitative analysis shows that the atmospheric pressure mainly affects the pressure disturbance trend in the cavity, while the atmospheric density determines the scale of the cavity and the size of the model load. By adjusting the pressure and density parameters, the prediction deviation of the small-scale model test on the disturbance time of the prototype reentrant jet pressure can be controlled within 2.4%.
- 1 December 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (12)
Uncertainty quantification in the motion of a water-exit vehicle and analysis of the robustness enhancement characteristics of pressure-equalizing exhaust
In the presence of complex wave and current interactions, the carrying platform for a water-exit vehicle frequently exhibits random motions across all six degrees of freedom (6-DOF). The quantification of the robustness of the vehicle's motion under the perturbations induced by the platform's stochastic movements is of paramount importance. Additionally, it is crucial to conduct research into methods that may enhance the robustness of the vehicle's trajectory against such disturbances. In this study, we employ the non-intrusive polynomial chaos expansion for the uncertainty quantification analysis. We construct a sample space and utilize the least angle regression algorithm within the framework of compressed sensing to determine the polynomial chaos expansion coefficients. The research focuses on analyzing the uncertainties in the motion and attitude of a water-exit vehicle influenced by the random 6-DOF motions of the carrying platform. It also examines the mechanism by which pressure-equalizing exhaust contributes to the enhancement of robustness in multi-degree-of-freedom motions. The study performs a sensitivity analysis using the Sobol index to evaluate how the 6-DOF motions of the carrying platform affect the water-exit vehicle's attitude and the pressure inside the exhaust bubble. The study's results demonstrate that the water-exit vehicle undergoes pitch, yaw, and roll deviations attributed to the random 6-DOF motions of the platform. Importantly, the platform's pitch, heave, and forward velocity significantly influence the uncertainty bandwidth regarding the vehicle's pitch attitude. Upon water exit, the vehicle's pitch motion shows heightened sensitivity to the platform's forward velocity, whereas its sensitivity to the platform's heave and pitch motions declines. The roll, sway, and yaw motions of the carrying platform predominantly influence the radial dimension and shape of the exhaust bubble, explaining a significant portion of the variance in bubble pressure. The pressure-equalizing exhaust, which forms a gas film over the vehicle's surface, creates an “equal pressure and robustness” effect. This results in an ‘adaptive’ righting moment and enhances robustness against 6-DOF disturbances.
- 1 December 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (12)
Uncertainty quantification in the motion of a water-exit vehicle and analysis of the robustness enhancement characteristics of pressure-equalizing exhaust
In the presence of complex wave and current interactions, the carrying platform for a water-exit vehicle frequently exhibits random motions across all six degrees of freedom (6-DOF). The quantification of the robustness of the vehicle's motion under the perturbations induced by the platform's stochastic movements is of paramount importance. Additionally, it is crucial to conduct research into methods that may enhance the robustness of the vehicle's trajectory against such disturbances. In this study, we employ the non-intrusive polynomial chaos expansion for the uncertainty quantification analysis. We construct a sample space and utilize the least angle regression algorithm within the framework of compressed sensing to determine the polynomial chaos expansion coefficients. The research focuses on analyzing the uncertainties in the motion and attitude of a water-exit vehicle influenced by the random 6-DOF motions of the carrying platform. It also examines the mechanism by which pressure-equalizing exhaust contributes to the enhancement of robustness in multi-degree-of-freedom motions. The study performs a sensitivity analysis using the Sobol index to evaluate how the 6-DOF motions of the carrying platform affect the water-exit vehicle's attitude and the pressure inside the exhaust bubble. The study's results demonstrate that the water-exit vehicle undergoes pitch, yaw, and roll deviations attributed to the random 6-DOF motions of the platform. Importantly, the platform's pitch, heave, and forward velocity significantly influence the uncertainty bandwidth regarding the vehicle's pitch attitude. Upon water exit, the vehicle's pitch motion shows heightened sensitivity to the platform's forward velocity, whereas its sensitivity to the platform's heave and pitch motions declines. The roll, sway, and yaw motions of the carrying platform predominantly influence the radial dimension and shape of the exhaust bubble, explaining a significant portion of the variance in bubble pressure. The pressure-equalizing exhaust, which forms a gas film over the vehicle's surface, creates an “equal pressure and robustness” effect. This results in an ‘adaptive’ righting moment and enhances robustness against 6-DOF disturbances.
- 1 December 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (12)
Similarity of scaled-down tests of water entry slamming considering the effects of atmospheric pressure and density
The water entry cavity and load characteristics obtained through scaled-down tests are correlated with the atmospheric pressure and density at the free surface. The evaluation of the influence of the cavitation number and atmospheric density coefficient is highly essential for scale tests to improve the prototype prediction accuracy. Focusing on the similarity criterion simulations and load prediction of the scaled-down tests, this study conducts the simulation tests of the water entry characteristics of the scaled-down model under different environments: normal pressure, reduced pressure, and reduced pressure and heavy gas replacement. Moreover, the influence of the cavitation number and atmospheric density coefficient on the multiphase flow, slamming load, and air cushion effect is discussed. The “air cushion effect” is formed at the top of the vehicle during water entry process, which affects the peak narrow pulse width slamming load. Furthermore, the “air cushion” experiences expansion–stability–rupture–escape with increasing water invasion depth. As the atmospheric pressure decreases, the gas tends to thin and the retention inertia weakens. The decrease in the “air cushion” buffering capacity leads to the increase in the slamming load and the expansion of the cavity scale formed by the liquid. Excessive simulation of the dynamic pressure results in the delayed closure of the cavity surface and the slow fall of the water curtain. As the atmospheric density increases, the retention inertia of gas increases because of the increase in the molecular mass, the slamming load gradually decreases, and the closure time of the cavitation and water curtain decreases. The research results of this paper provide some reference for the similarity transformation of the scaled-down test and the pre-research of the prototype.
- 1 December 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (12)
Similarity of scaled-down tests of water entry slamming considering the effects of atmospheric pressure and density
The water entry cavity and load characteristics obtained through scaled-down tests are correlated with the atmospheric pressure and density at the free surface. The evaluation of the influence of the cavitation number and atmospheric density coefficient is highly essential for scale tests to improve the prototype prediction accuracy. Focusing on the similarity criterion simulations and load prediction of the scaled-down tests, this study conducts the simulation tests of the water entry characteristics of the scaled-down model under different environments: normal pressure, reduced pressure, and reduced pressure and heavy gas replacement. Moreover, the influence of the cavitation number and atmospheric density coefficient on the multiphase flow, slamming load, and air cushion effect is discussed. The “air cushion effect” is formed at the top of the vehicle during water entry process, which affects the peak narrow pulse width slamming load. Furthermore, the “air cushion” experiences expansion–stability–rupture–escape with increasing water invasion depth. As the atmospheric pressure decreases, the gas tends to thin and the retention inertia weakens. The decrease in the “air cushion” buffering capacity leads to the increase in the slamming load and the expansion of the cavity scale formed by the liquid. Excessive simulation of the dynamic pressure results in the delayed closure of the cavity surface and the slow fall of the water curtain. As the atmospheric density increases, the retention inertia of gas increases because of the increase in the molecular mass, the slamming load gradually decreases, and the closure time of the cavitation and water curtain decreases. The research results of this paper provide some reference for the similarity transformation of the scaled-down test and the pre-research of the prototype.
- 1 May 2018
- Published by Elsevier in Computers & Mathematics with Applications
- Vol. 75 (10) , 3549-3557
Optimal investment problem under non-extensive statistical mechanics
- 1 May 2018
- Published by Elsevier in Computers & Mathematics with Applications
- Vol. 75 (10) , 3549-3557
Optimal investment problem under non-extensive statistical mechanics