ESEvgeny N. Smirnov

Evgeny N. Smirnov

*This is an algorithmically generated author record based on publicly available information.

Evgeny N. Smirnov has a total of 49 co-authors. Here are the top co-authors by number of shared publications:

  • V. A. Sklyar

    Ugarov Technological University, Stary Oskol, Russia

    6 shared publications
  • South Ural State Humanitarian Pedagogical University

    5 shared publications
  • A. N. Smirnov

    Physical and Technological Institute of Metals and Alloys, National Academy of Sciences of Ukraine, Kiev, Ukraine

    4 shared publications
  • Vladimir Belevitin

    Южно-уральский государственный гуманитарно-педагогический университет

    4 shared publications
  • Physico-Technological Institute of Metals and Alloys of National Academy of Sciences of Ukraine

    3 shared publications
  • Stary Oskol Technological Iinstitute n.a. A.A. Ugarov (branch) National University of Science and Technology "MISiS"

    3 shared publications

Latest Publications

  • Application of Four-roll Passes upon Rolling of Nonsymmetrical Flange Channel Sections

    by I. K. Oginskii, E. N. Smirnov, V. V. Kukhar’, A. N. Smirnov, V. A. Sklyar

    This article describes the operation of four-roll passes for rolling of nonsymmetrical flange channel sections. Transformation reasonability of existing tw


  • Technological Aspects of Minimization of the Sizes of a Continuous Casting-Rolling Unit in the Production of Wire Rods from Fire-Refined Copper

    by E. N. Smirnov, V. A. Skliar, A. S. Gorozhankin, A. N. Smirnov, V. A. Belevitin, G. A. Orlov


  • Qualimetric Assessment of the Level of Formation of Professional Competencies of University Graduates in the Field of Information Technologies

    by Vladimir A. Belevitin, South Ural State Humanitarian Pedagogical University, Evgeny N. Smirnov, Dmitry N. Korneev, Ekaterina V. Evplova


  • The Exploration of the Possibility of Using Continuous-Cast 55 Grade Steel in the Manufacturing of 40-mm-in-Diameter Grinding Balls of IV and V Hardness Class

    by E. N. Smirnov, A. N. Smirnov, V. V. Mikheev, V. A. Sklyar, V. A. Belevitin, A. P. Verzilov, G. A. Orlov

    Results of a field–experimental study on the applicability of continuous-cast medium-carbon 55 grade steel sparingly alloyed with chromium to th


  • Open Access

    Additional shearing impact on the effectiveness of MSR technology in conditions of billet CCM

    by E. N. Smirnov, V. A. Sklyar, D. I. Bogadevich, A. N. Smirnov, V. A. Belevitin

    Помимо электромагнитного перемешивания, разливки стали с низким перегревом, интенсивного теплоотбора в верхней части зоны вторичного охлаждения, технология Mechanical Soft Reduction (MSR) оказалась очень эффективным технологическим приемом, обеспечивающим уменьшение ликвации и осевой пористости в непрерывнолитой заготовке. Реализация технологии MSR при производстве непрерывнолитых сортовых заготовок имеет ряд особенностей, которые обусловлены их квадратной формой. В этом случае особенно перспективным является использование блоков сегментной конструкции, которые получили название pinch-rollsegment. Наличие в линии МНЛЗ блока MSR такой конструкции позволяет реализовать двухстадийную схему деформации. В работе предложена новая двухстадийная схема технологии MSR, которая позволяет реализовать на первой стадии комбинированное деформационное воздействие на основе сжатия в вертикальной плоскости и сдвигового относительного смещения граней, а на второй стадии – деформационное воздействие на основе сжатия в вертикальной плоскости. Такой подход дает возможность дополнительно исправлять деформации поперечного сечения профиля, а именно дефект «ромбовидность». Представлены результаты сопоставительного исследования с использованием методов физического моделирования по оценке вклада в общую эффективность технологии MSR сортовых непрерывнолитых заготовок дополнительного сдвигового относительного смещения граней в горизонтальной плоскости. Использование плоской модели в совокупности с предложенной формой деформирующих валков и сочетания моделирующих материалов позволили достичь хорошего подобия по геометрическому критерию, а также по критерию эквивалентности отношения напряжений, возникающих на границе фронта кристаллизации. Полученные экспериментальные данные дали возможность развить представления о механизмах дополнительных положительных эффектов от приложения сдвигового воздействия. В частности, деформация металла поверхностных и прилегающих к ним слоев заготовки в валках со специальным вышеописанным профилированием будет способствовать повышению их качества за счет возникновения сдвиговых деформаций, интенсифицирующих процесс схлопывания подкорковых пузырей, «залечивания» микротрещин и т.д. В свою очередь, искусственное создание крутящего момента в сечении заготовки будет способствовать возникновению сдвиговых деформаций в закристаллизовавшихся «мостах» осевой жидко-твердой области слитка, тем самым интенсифицируя процесс их разрушения и повышая качество макроструктуры заготовки.

  • Technical Feasibility Assessment for Roll Pass Designs in Three-High Shape-Mill Stands in Modern Mini-Mills

    by E. N. Smirnov, A. N. Smirnov, V. A. Sklyar, V. A. Belevitin, S. V. Kuberskii


  • Open Access

    Influence of thermal state of the end area of multiple continuous-cast billet on cracking of the ends of hot-rolled breakdown at rolling

    by E. N. Smirnov, V. A. Sklyar, A. N. Smirnov, V. A. Belevitin, R. E. Pivovarov

    The authors have made an analysis of problems arising in the rolling of continuous-cast billets in the modern mini-metallurgical and rerolling plants. It is shown that the use of trio stands in rolling mills of these plants makes it necessary to obtain billets of multiple lengths from bars (most often of 12-meter length) produced in the rolling shop. The subsequent rolling of such multiple billets has revealed increased cracking of the front edge and, as a result, increased metal consumption. Analysis of the causes of these cracks has been made. It was indicated that this defect can appear as a result of a certain stress-strain state formed at the end of hot-rolled breakdown. It is caused by the presence of an uneven temperature field due to more intensive end cooling, to reduction mode in the trio stand and to the presence of axial defects in the continuous-cast billet. The study was conducted on the industrial medium-grade mill 500/370, as well as using mathematical modeling by finite element method. The influence of a set of technological factors, such as temperature of the billets heating before rolling, the time interval of their transportation on the site “heating furnace – first stand of the rolling mill” and parameters of the macrostructure of axial area of the metal were investigated. Calculations by the developed mathematical model have indicated the need to take into account the presence of a scale layer on the heated continuous-cast billet. It is shown that depending on the heating temperature and transport time, the temperature difference at the billet’s end compared to the heating temperature can be from 45 to 100 °C. It will lead to an uneven distribution of deformation resistance and unfavorable stress-strain state at the billet’s end. In addition, the presence of an axial defect can affect the cracking because of its shape and its transformation during reduction. Obtained experimental data allowed hypothesizing the mechanism of transformation of discontinuity defects into cracks at the billet’s end due to the conditions of continuous casting and cutting of billets during rolling in the reduction stand.


  • Numerical Analysis and Design of an Efficient System of Unloading of Lime from a Shaft Burning Furnace

    by S. P. Eron’ko, M. Yu. Tkachev, E. V. Oshovskaya, E. N. Smirnov, V. A. Sklyar

  • Technological aspects of quality formation of welding wire in technological system «steel—wire rod rolling—drawing»

    by Stary Oskol Technological Iinstitute n.a. A.A. Ugarov (branch) National University of Science and Technology ", Ye. N. Smirnov, M I Si S, V. A. Sklyar, Stary Oskol Technological Iinstitute n.a. A.A. Ugarov (branch) National University of Science and Technology "MISiS", V. A. Belevitin, South Ural State Humanitarian Pedagogical University, A. N Smirnov, Physico-Technological Institute of Metals and Alloys of National Academy of Sciences of Ukraine, S. P Yeronko, et al.

    ????? ??????????, ?????????? ??????????????, ?????????? ??????????, ??????? ???????, ?????? ?? ????????, ?????????? ????????, ???????? ??????????, ??????????? ???????, ????? ? ??????????, ?????????? ??????????, ??????? ??????????

  • Minimization influence of technologies’ system of small and medium-sized regional producers of extruded aluminium profiles on development of corrosion processes of finished products

    by Federal State-Funded Educational Institution of Higher Education (FGBOU VO) “Starooskolskiy Technological Institute Named after A.A. Ugarov (Branch) of Federal State Autonomous Educational Institution of Higher Education (FGAOU VO) “National University of, Ye.N. Smirnov, V.B. Shchukin, Co Ltd. “Altek”, V.A. Sklyar, M.V. Mitrofanov, V.A. Belevitin, South Ural State Humanitarian Pedagogical University, A.N. Smirnov, Physical-Tecnological Institute of Metals and Alloys of Ukraine’s NAS (FTIMS NAN U)

    ????? ??????????, ?????????? ??????????????, ?????????? ??????????, ??????? ???????, ?????? ?? ????????, ?????????? ????????, ???????? ??????????, ??????????? ???????, ????? ? ??????????, ?????????? ??????????, ??????? ??????????