Elahe Soltanaghai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Elahe Soltanaghai has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Abhi Nayak
Department of Computer Science, University of Illinois Urbana-Champaign, Urbana, IL 61801, USA
2 shared publications - Adam C. Watts
Pacific Wildland Fire Sciences Laboratory, United States Forest Service, Wenatchee, WA, USA
2 shared publications - Derek Houtz
Microwave Remote Sensing, Swiss Federal Institute for Forest, Snow, and Landscape Research, 8903 Birmensdorf, Switzerland
2 shared publications - Mohamad Alipour
University of Illinois Urbana-Champaign
2 shared publications - Runze Zhang
Department of Civil and Environmental Engineering, University of Illinois Urbana-Champaign, Urbana, IL, USA
2 shared publications Akarsh Prabhakara
1 shared publication
Latest Publications
- Open Access
- 6 December 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (23) , 4596
Evaluation of Soil Moisture Retrievals from a Portable L-Band Microwave Radiometer
A novel Portable L-band radiometer (PoLRa), compatible with tower-, vehicle- and drone-based platforms, can provide gridded soil moisture estimations from a few meters to several hundred meters yet its retrieval accuracy has rarely been examined. This study aims to provide an initial assessment of the performance of PoLRa-derived soil moisture at a spatial resolution of approximately 0.7 m × 0.7 m at a set of sampling pixels in central Illinois, USA. This preliminary evaluation focuses on (1) the consistency of PoLRa-measured brightness temperatures from different viewing directions over the same area and (2) whether PoLRa-derived soil moisture retrievals are within an acceptable accuracy range. As PoLRa shares many aspects of the L-band radiometer onboard NASA’s Soil Moisture Active Passive (SMAP) mission, two SMAP operational algorithms and the conventional dual-channel algorithm (DCA) were applied to calculate volumetric soil moisture from the measured brightness temperatures. The vertically polarized brightness temperatures from the PoLRa are typically more stable than their horizontally polarized counterparts across all four directions. In each test period, the standard deviations of observed dual-polarization brightness temperatures are generally less than 5 K. By comparing PoLRa-based soil moisture retrievals against the simultaneous moisture values obtained by a handheld capacitance probe, the unbiased root mean square error (ubRMSE) and the Pearson correlation coefficient (R) are mostly below 0.05 m3/m3 and above 0.7 for various algorithms adopted here. While SMAP models and the DCA algorithm can derive soil moisture from PoLRa observations, no single algorithm consistently outperforms the others. These findings highlight the significant potential of ground- or drone-based PoLRa measurements as a standalone reference for the calibration and validation of spaceborne L-band synthetic aperture radars and radiometers. The accuracy of PoLRa-yielded high-resolution soil moisture can be further improved via standardized operational procedures and appropriate tau-omega parameters.
- 6 December 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (23) , 4596
Open AccessEvaluation of Soil Moisture Retrievals from a Portable L-Band Microwave Radiometer
A novel Portable L-band radiometer (PoLRa), compatible with tower-, vehicle- and drone-based platforms, can provide gridded soil moisture estimations from a few meters to several hundred meters yet its retrieval accuracy has rarely been examined. This study aims to provide an initial assessment of the performance of PoLRa-derived soil moisture at a spatial resolution of approximately 0.7 m × 0.7 m at a set of sampling pixels in central Illinois, USA. This preliminary evaluation focuses on (1) the consistency of PoLRa-measured brightness temperatures from different viewing directions over the same area and (2) whether PoLRa-derived soil moisture retrievals are within an acceptable accuracy range. As PoLRa shares many aspects of the L-band radiometer onboard NASA’s Soil Moisture Active Passive (SMAP) mission, two SMAP operational algorithms and the conventional dual-channel algorithm (DCA) were applied to calculate volumetric soil moisture from the measured brightness temperatures. The vertically polarized brightness temperatures from the PoLRa are typically more stable than their horizontally polarized counterparts across all four directions. In each test period, the standard deviations of observed dual-polarization brightness temperatures are generally less than 5 K. By comparing PoLRa-based soil moisture retrievals against the simultaneous moisture values obtained by a handheld capacitance probe, the unbiased root mean square error (ubRMSE) and the Pearson correlation coefficient (R) are mostly below 0.05 m3/m3 and above 0.7 for various algorithms adopted here. While SMAP models and the DCA algorithm can derive soil moisture from PoLRa observations, no single algorithm consistently outperforms the others. These findings highlight the significant potential of ground- or drone-based PoLRa measurements as a standalone reference for the calibration and validation of spaceborne L-band synthetic aperture radars and radiometers. The accuracy of PoLRa-yielded high-resolution soil moisture can be further improved via standardized operational procedures and appropriate tau-omega parameters.
- Open Access
Sub-Meter Remote Sensing of Soil Moisture Using Portable L-band Microwave Radiometer
Spaceborne microwave passive soil moisture products are known for their accuracy but are often limited by coarse spatial resolutions. This limits their ability to capture finer soil moisture gradients and hinders their applications. The Portable L band radiometer (PoLRa) offers soil moisture measurements from submeter to tens of meters depending on the altitude of measurement. Given that the assessments of soil moisture derived from this sensor are notably lacking, this study aims to evaluate the performance of submeter soil moisture retrieved from PoLRa mounted on poles at four different locations in central Illinois, USA. The evaluation focuses on the consistency of PoLRa measured brightness temperatures from different directions relative to the same area, and the accuracy of PoLRa derived soil moisture. As PoLRa shares many aspects of the L band radiometer onboard the NASA Soil Moisture Active Passive (SMAP) mission, two SMAP operational algorithms and the conventional dual channel algorithm were applied to calculate soil moisture from the measured brightness temperatures. The vertically polarized brightness temperatures from the PoLRa are typically more stable than their horizontally polarized counterparts. In each test period, the standard deviations of observed dual polarization brightness temperatures are generally less than 5 K. By comparing PoLRa based soil moisture retrievals against the moisture values obtained by handheld time domain reflectometry, the unbiased root mean square error and the Pearson correlation coefficient are mostly below 0.04 and above 0.75, confirming the high accuracy of PoLRa derived soil moisture retrievals and the feasibility of utilizing SMAP algorithms for PoLRa data. These findings highlight the significant potential of ground or drone based PoLRa measurements as a standalone reference for future spaceborne L band sensors.
Open AccessSub-Meter Remote Sensing of Soil Moisture Using Portable L-band Microwave Radiometer
Spaceborne microwave passive soil moisture products are known for their accuracy but are often limited by coarse spatial resolutions. This limits their ability to capture finer soil moisture gradients and hinders their applications. The Portable L band radiometer (PoLRa) offers soil moisture measurements from submeter to tens of meters depending on the altitude of measurement. Given that the assessments of soil moisture derived from this sensor are notably lacking, this study aims to evaluate the performance of submeter soil moisture retrieved from PoLRa mounted on poles at four different locations in central Illinois, USA. The evaluation focuses on the consistency of PoLRa measured brightness temperatures from different directions relative to the same area, and the accuracy of PoLRa derived soil moisture. As PoLRa shares many aspects of the L band radiometer onboard the NASA Soil Moisture Active Passive (SMAP) mission, two SMAP operational algorithms and the conventional dual channel algorithm were applied to calculate soil moisture from the measured brightness temperatures. The vertically polarized brightness temperatures from the PoLRa are typically more stable than their horizontally polarized counterparts. In each test period, the standard deviations of observed dual polarization brightness temperatures are generally less than 5 K. By comparing PoLRa based soil moisture retrievals against the moisture values obtained by handheld time domain reflectometry, the unbiased root mean square error and the Pearson correlation coefficient are mostly below 0.04 and above 0.75, confirming the high accuracy of PoLRa derived soil moisture retrievals and the feasibility of utilizing SMAP algorithms for PoLRa data. These findings highlight the significant potential of ground or drone based PoLRa measurements as a standalone reference for future spaceborne L band sensors.
- Open Access
High Resolution Point Clouds from mmWave Radar
This paper explores a machine learning approach for generating high resolution point clouds from a single-chip mmWave radar. Unlike lidar and vision-based systems, mmWave radar can operate in harsh environments and see through occlusions like smoke, fog, and dust. Unfortunately, current mmWave processing techniques offer poor spatial resolution compared to lidar point clouds. This paper presents RadarHD, an end-to-end neural network that constructs lidar-like point clouds from low resolution radar input. Enhancing radar images is challenging due to the presence of specular and spurious reflections. Radar data also doesn't map well to traditional image processing techniques due to the signal's sinc-like spreading pattern. We overcome these challenges by training RadarHD on a large volume of raw I/Q radar data paired with lidar point clouds across diverse indoor settings. Our experiments show the ability to generate rich point clouds even in scenes unobserved during training and in the presence of heavy smoke occlusion. Further, RadarHD's point clouds are high-quality enough to work with existing lidar odometry and mapping workflows.
Open AccessHigh Resolution Point Clouds from mmWave Radar
This paper explores a machine learning approach for generating high resolution point clouds from a single-chip mmWave radar. Unlike lidar and vision-based systems, mmWave radar can operate in harsh environments and see through occlusions like smoke, fog, and dust. Unfortunately, current mmWave processing techniques offer poor spatial resolution compared to lidar point clouds. This paper presents RadarHD, an end-to-end neural network that constructs lidar-like point clouds from low resolution radar input. Enhancing radar images is challenging due to the presence of specular and spurious reflections. Radar data also doesn't map well to traditional image processing techniques due to the signal's sinc-like spreading pattern. We overcome these challenges by training RadarHD on a large volume of raw I/Q radar data paired with lidar point clouds across diverse indoor settings. Our experiments show the ability to generate rich point clouds even in scenes unobserved during training and in the presence of heavy smoke occlusion. Further, RadarHD's point clouds are high-quality enough to work with existing lidar odometry and mapping workflows.