AMArul Moorthy

Arul Moorthy

*This is an algorithmically generated author record based on publicly available information.

Arul Moorthy has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Deep learning-assisted multi-objective optimization and microstructure property correlation in rotary friction welding of dissimilar AA1100–AA2014 aluminium alloys

    by Premkumar Nagarajan, Dinesh Subbiah, Ravikumar Sm, Dinakaran Jeeva, Rajkumar Sivanraju, Arul Moorthy, Paranthaman Venkatesan, Arunprasad Jayaraman

  • Open Access

    Sustainable Hybrid Composites: Eggshell Nanoparticle-Reinforced Jute Fabric Epoxy for High-Performance Engineering Applications

    by Poyyathapan Kesavan, Dinesh Subbiah, Ganesh Kumar Arunachallam, Arul Moorthy

    This study investigates the fabrication and characterization of an innovative eggshell nanoparticle (ESNP)-reinforced hybrid composite integrating woven jute fabric and epoxy resin for advanced engineering applications. Incorporating 10 % ESNPs enhances mechanical and microstructural properties, presenting a high-performance, sustainable alternative to conventional composites. The hybrid composites were fabricated using a vacuum-assisted compression molding technique with three distinct fiber-stacking configurations: Sample 1 (glass-jute-glass-jute), Sample 2 (jute-glass-jute-glass), and Sample 3 (glass-jute-jute-glass). Comprehensive mechanical testing revealed that Sample 3 exhibited superior properties, achieving a tensile strength of 77.77 MPa, a flexural strength of 452 MPa, an impact strength of 4.6 J, and an interlaminar shear strength of 15.25 N/mm². Scanning Electron Microscopy (SEM) confirmed uniform ESNP dispersion, improved fiber-matrix interfacial bonding, and reduced void formation, contributing to enhanced load-bearing capacity and durability. By integrating bio-waste-derived nanoparticles into fiber-reinforced polymer composites, this research advances the development of eco-friendly, lightweight materials for high-performance applications in automotive body panels, aerospace structures, energy-absorbing components, and sustainable engineering solutions.


  • Open Access

    Optimization and prediction of machining parameters in nanoparticle-reinforced FMLs using AI techniques

    by Narasimharajan Mani, Dinesh Subbiah, Arul Moorthy, Adinarayanan Arunagiri

    This study focuses on optimizing and predicting the drilling performance of Fiber Metal Laminates (FMLs) reinforced with BaSO4 nanoparticles, achieved by adjusting parameters like spindle speed, feed rate, and tool diameter. Key responses—thrust force, torque, delamination, and surface roughness—were evaluated to enhance machinability. Using Central Composite Design, optimal parameters were identified: a spindle speed of 3000 rpm, feed rate of 10 mm/min, and tool diameter of 6 mm. Under these conditions, thrust force decreased by 51.92%, surface roughness improved to Ra = 2.3 µm, and delamination reduced by 21%. A two-layer feed-forward neural network in MATLAB 2023a accurately predicted outcomes with a Mean Square Error (MSE) of 1.4025e-05, demonstrating high correlation with experimental data. The inclusion of BaSO4 nanoparticles significantly improved the FMLs’ mechanical and thermal properties, enhancing machinability. This integrated approach of experimental optimization and predictive modeling provides a strong framework for precision machining of hybrid composites. The findings are especially promising for aerospace and automotive industries, where defect-free, high-quality FML machining is essential, positioning this method as a key advancement in nanoparticle-reinforced composite drilling.


  • Open Access

    Investigation of synthetic and natural cork fiber laminate polymer composite bending characteristics

    by Arul Moorthy, Kannakumar Kanagaraj, Muruganandhan Palanisamy, Girimurugan Ramasamy

    Cork is becoming recognized as a sustainable and renewable material owing to its low density, superior acoustic and thermal insulation properties, energy absorption capabilities, and environmental friendliness. Sustainability has catalyzed innovation in kayak production and several other industries. This project sought to develop an environmentally sustainable "sandwich" composite material including a cork agglomerate core, natural fiber facings, and bio-based epoxy resin. This study investigated several material combinations and produced laminate plates with a cork core, flax fiber skins (100–500 g/m2), and bio-epoxy resin. The composite was meticulously produced using vacuum pressing to ensure its integrity and functionality. The laminate plates were then subjected to extensive testing for mechanical qualities. Bending tests demonstrated favorable force-displacement characteristics for composites. Impact testing at 2.9 m/s recorded energy absorption of up to 1.99 J. The evaluation of several specimen orientations enabled a comprehensive assessment of composite performance. In bending tests, 500 g/m2 flax fiber laminates achieved a maximum load of 65 N and a displacement of 5.5 mm, comparable to standard fiberglass composites which recorded 60 N and 4 mm. Impact tests demonstrated that the cork core effectively absorbs energy, making it appropriate for rigorous applications. Density correlations indicated that flax laminates with a mass of 500 g/m2 exhibited the highest strength.