Li Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Li Liu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Huiliang Cao
Beijing Institute of Technology
2 shared publications - Hongqiao Huang
Key Laboratory of Instrumentation Science & Dynamic Measurement, Ministry of Education, North University of China, Taiyuan 030051, China
1 shared publication - Huimin Tian
Key Laboratory of Instrumentation Science & Dynamic Measurement, Ministry of Education, North University of China, Taiyuan 030051, China
1 shared publication - Wen Ye
National Institute of Metrology, China, 18 North Third Ring East Road, Chaoyang District, Beijing 100029, China
1 shared publication - Wenjing Wang
School of Microelectronics, University of Science and Technology of China, Hefei 230022, China
1 shared publication - Wenqiang Wei
School of Instrument and Electronics, North University of China, Taiyuan, China
1 shared publication
Latest Publications
- Open Access
- 26 April 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (5) , 507
Temperature Compensation Method for MEMS Ring Gyroscope Based on PSO-TVFEMD-SE-TFPF and FTTA-LSTM
This study proposes a novel parallel denoising and temperature compensation fusion algorithm for MEMS ring gyroscopes. First, the particle swarm optimization (PSO) algorithm is used to optimize the time-varying filter-based empirical mode decomposition (TVFEMD), obtaining optimal decomposition parameters. Then, TVFEMD decomposes the gyroscope output signal into a series of product function (PF) signals and a residual signal. Next, sample entropy (SE) is employed to classify the decomposed signals into three categories: noise segment, mixed segment, and feature segment. According to the parallel model structure, the noise segment is directly discarded. Meanwhile, time–frequency peak filtering (TFPF) is applied to denoise the mixed segment, while the feature segment undergoes compensation. For compensation, the football team training algorithm (FTTA) is used to optimize the parameters of the long short-term memory (LSTM) neural network, forming a novel FTTA-LSTM architecture. Both simulations and experimental results validate the effectiveness of the proposed algorithm. After processing the MEMS gyroscope output signal using the PSO-TVFEMD-SE-TFPF denoising algorithm and the FTTA-LSTM temperature drift compensation model, the angular random walk (ARW) of the MEMS gyroscope is reduced to 0.02°/√h, while the bias instability (BI) decreases to 2.23°/h. Compared to the original signal, ARW and BI are reduced by 99.43% and 97.69%, respectively. The proposed fusion-based temperature compensation method significantly enhances the temperature stability and noise performance of the gyroscope.
- 26 April 2025
- Published by MDPI AG in Micromachines
- Vol. 16 (5) , 507
Open AccessTemperature Compensation Method for MEMS Ring Gyroscope Based on PSO-TVFEMD-SE-TFPF and FTTA-LSTM
This study proposes a novel parallel denoising and temperature compensation fusion algorithm for MEMS ring gyroscopes. First, the particle swarm optimization (PSO) algorithm is used to optimize the time-varying filter-based empirical mode decomposition (TVFEMD), obtaining optimal decomposition parameters. Then, TVFEMD decomposes the gyroscope output signal into a series of product function (PF) signals and a residual signal. Next, sample entropy (SE) is employed to classify the decomposed signals into three categories: noise segment, mixed segment, and feature segment. According to the parallel model structure, the noise segment is directly discarded. Meanwhile, time–frequency peak filtering (TFPF) is applied to denoise the mixed segment, while the feature segment undergoes compensation. For compensation, the football team training algorithm (FTTA) is used to optimize the parameters of the long short-term memory (LSTM) neural network, forming a novel FTTA-LSTM architecture. Both simulations and experimental results validate the effectiveness of the proposed algorithm. After processing the MEMS gyroscope output signal using the PSO-TVFEMD-SE-TFPF denoising algorithm and the FTTA-LSTM temperature drift compensation model, the angular random walk (ARW) of the MEMS gyroscope is reduced to 0.02°/√h, while the bias instability (BI) decreases to 2.23°/h. Compared to the original signal, ARW and BI are reduced by 99.43% and 97.69%, respectively. The proposed fusion-based temperature compensation method significantly enhances the temperature stability and noise performance of the gyroscope.
- Open Access
- 10 December 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (12) , 1484
Design and Implementation of a CMOS-MEMS Out-of-Plane Detection Gyroscope
A MEMS gyroscope is a critical sensor in attitude control platforms and inertial navigation systems, which has the advantages of small size, light weight, low energy consumption, high reliability and strong anti-interference capability. This paper presents the design, simulation and fabrication of a Y-axis gyroscope with out-of-plane detection developed using CMOS-MEMS technology. The structural dimensions of the gyroscope were optimized through a multi-objective genetic algorithm, and modal, harmonic response and range simulation analyses were carried out to verify the reasonableness of the design. The chip measured 1.2 mm × 1.3 mm. The simulation results indicate that the driving and detecting frequencies of the gyroscope were 9215.5 Hz and 9243.5 Hz, respectively; the Q-factors were 83,790 and 46,085; the mechanical sensitivity was 4.87 × 10−11 m/°/s; and the operational range was ±600°/s. Chip testing shows that the static capacitance was consistent with the preset value. The error between the measured frequency characteristics and the simulation results was 1.9%. This design establishes a foundation for the integration of the gyroscope’s structure and circuitry.
- 10 December 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (12) , 1484
Open AccessDesign and Implementation of a CMOS-MEMS Out-of-Plane Detection Gyroscope
A MEMS gyroscope is a critical sensor in attitude control platforms and inertial navigation systems, which has the advantages of small size, light weight, low energy consumption, high reliability and strong anti-interference capability. This paper presents the design, simulation and fabrication of a Y-axis gyroscope with out-of-plane detection developed using CMOS-MEMS technology. The structural dimensions of the gyroscope were optimized through a multi-objective genetic algorithm, and modal, harmonic response and range simulation analyses were carried out to verify the reasonableness of the design. The chip measured 1.2 mm × 1.3 mm. The simulation results indicate that the driving and detecting frequencies of the gyroscope were 9215.5 Hz and 9243.5 Hz, respectively; the Q-factors were 83,790 and 46,085; the mechanical sensitivity was 4.87 × 10−11 m/°/s; and the operational range was ±600°/s. Chip testing shows that the static capacitance was consistent with the preset value. The error between the measured frequency characteristics and the simulation results was 1.9%. This design establishes a foundation for the integration of the gyroscope’s structure and circuitry.