AMAlexandre Simas de Medeiros

Alexandre Simas de Medeiros

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alexandre Simas de Medeiros has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of Asphalt Emulsion Stabilization on Pavement Structural Behavior and Life Cycle Assessment (LCA)

    by Alexandre Simas de Medeiros, Marina Donato, Marcelino Aurélio Vieira da Silva

    Assessing pavement sustainability requires jointly evaluating structural performance and environmental impacts, yet these dimensions are often analyzed separately. This study proposes an integrated framework combining mechanistic–empirical pavement design and life cycle assessment (LCA) to quantify the structural–environmental trade‐off associated with asphalt‐emulsion stabilization of subbase soils. Structural performance was assessed in MeDiNa using fatigue cracking and rutting criteria, while a cradle‐to‐construction LCA was conducted in SimaPro based on ISO 14040/14044, using Ecoinvent and SICRO (2023) data. Four subbase scenarios were compared: natural soil at optimum moisture and the same soil stabilized with 1%, 2%, and 3% asphalt emulsion. Stabilization substantially increased subbase stiffness and allowed a reduction in asphalt surface thickness. However, although all scenarios satisfied the structural criteria over the 10‐year design period, the thinner asphalt layer increased wheel‐path rutting, while fatigue remained the governing design criterion. From the environmental perspective, higher emulsion contents led to progressively higher CO 2 ‐equivalent emissions and water consumption, with emulsion production and transport emerging as the dominant hotspot. The results show that structural optimization does not necessarily translate into lower environmental impacts. Therefore, no single optimum solution was identified, and pavement design should adopt a multi‐criteria perspective to explicitly balance structural gains against environmental burdens.

  • Open Access

    Evaluating Urban Mobility Resilience in Petrópolis Through a Multicriteria Approach

    by Alexandre Simas de Medeiros, Marcelino Aurélio Vieira da Silva, Marcus Hugo Sant’anna Cardoso, Tálita Floriano Santos, Catalina Toro, Gonzalo Rojas, Vicente Aprigliano

    Urban mobility resilience plays a central role in sustainable urban planning discussions, especially considering the challenges of extreme events, climate change, and the increasing scarcity of fossil fuels. This study evaluates urban mobility resilience in Petrópolis (RJ), incorporating socio-spatial heterogeneity and energy vulnerability. This research fills methodological gaps in the literature by proposing a composite resilience index that integrates technical, socioeconomic, and fossil fuel dependency variables within a robust multicriteria framework. We selected eleven variables relevant to urban mobility and organized them into inference blocks. We normalized the variables using Gaussian functions, respecting their maximization or minimization characteristics. We applied the Analytic Hierarchy Process (AHP) to assign weights to the criteria and then aggregated and ranked the results using multicriteria analysis. The final index represents the adaptive capacity of urban territories facing the energy crisis, and we applied it spatially to the neighborhoods of Petrópolis. The analysis identified a significant concentration of neighborhoods with low resilience, particularly in quadrants, combining deficiencies in public transportation, high dependence on fossil fuels, and socioeconomic constraints. Factors such as limited pedestrian access, insufficient motorized public transport coverage, and a high proportion of elderly residents emerged as significant constraints on urban resilience. Intervention strategies that promote active mobility, improve accessibility, and diversify transportation modes proved essential for strengthening local resilience. The results emphasize the urgent need for public policies to reduce energy vulnerability, foster active mobility, and promote equity in access to transportation infrastructure.


  • Open Access

    Influence of Emulsion Type and Moisture on the Stiffness of Stabilized Granular Soil

    by Alexandre S. De Medeiros, Marcelino A. V. Da Silva

    The objective of this study is to investigate how moisture content affects the stiffness of a gravelly-sandy soil stabilized with asphalt emulsion, considering different types of emulsion (medium- and slow-setting) and modified compaction energy. Dynamic triaxial tests were carried out to determine the stiffness of specimens at different moisture contents, considering the dry and wet branches of the compaction curve, all stabilized with 2% asphalt emulsion. The influence of moisture content and emulsion type was assessed using robust analysis of variance (ANOVA), allowing the evaluation of statistical significance and the interaction between factors. The results showed that the stiffness of the stabilized soil is strongly influenced by moisture content, with a peak value observed near the optimum moisture (~8.2%). The slow-setting (SS) emulsion achieved the best performance, reaching 938.94 MPa, representing a 452.32% increase compared to the untreated soil. The medium-setting (MS) emulsion also produced a significant stiffness gain (375.29%). Statistical analysis indicated that emulsion type was the most influential factor (Q = 1747; p = 0.001). This study contributes to the literature by experimentally and statistically demonstrating how moisture content and emulsion type affect the stiffness of stabilized soils.


  • Open Access

    Active break program: an evidencebased review for the promotion of occupational health

    by Wagner Vieira Sant’aNa, Alexandre Simas de Medeiros

    The objective of this study is to scientifically organize research on the impacts of short active breaks on employees’ physical and mental health, with the aim of proposing a model adapted to the Brazilian work environment. The narrative analysis is structured around five main themes: (1) types of exercises recommended in the workplace context; (2) evidence of cholesterol reduction and physiological benefits; (3) differentiation by age group and biotype; (4) effects on stress and mental health; and (5) additional benefits associated with outdoor physical activity. Clinical trials and longitudinal studies published between 2010 and 2024 were analyzed. Active breaks proved effective in lowering LDL, improving HDL, and controlling stress (variabilidade da frequência cardíaca and cortisol), relieving musculoskeletal pain, and increasing physical and emotional vitality. Activities performed outdoors intensified the positive psychophysiological effects. The findings highlight the feasibility of implementing short breaks, guided by specialists and tailored to employee profiles, as an ergonomic and preventive strategy, in accordance with Regulatory Standard No. 17 and the Occupational Health Medical Control Program. The regular adoption of active breaks is a low-cost, high- impact measure for promoting health in the workplace.

  • Open Access

    Análise de emissões de gases de efeito estufa considerando o serviço de pavimentação em via urbana

    by Claudeny Simone Alves Santana, Alexandre Simas de Medeiros, Marcelino Aurélio Vieira da Silva

    Este estudo avalia as emissões de gases de efeito estufa (GEE) associadas à construção de pavimentos rodoviários com concreto asfáltico usinado a quente. Utilizando a metodologia de Avaliação do Ciclo de Vida (ACV), conforme as normas ISO 14040 e 14044. A unidade funcional analisada foi de 1 km de pavimento com 7 metros de largura, considerando variações no tipo de solo utilizado na base. As principais etapas avaliadas foram a produção de materiais, transporte, usinagem e execução do pavimento. O estudo integrou dados de ferramentas como MeDiNa®, Ecoinvent®, SimaPro® e SICRO 3 para quantificar as emissões de CO2 equivalente. Os resultados indicam que a produção de materiais (Etapa A1) e a usinagem da mistura asfáltica (Etapa A3) são as principais fontes de emissões. As variações nos tipos de solo influenciam diretamente a espessura do pavimento e as emissões totais, com diferenças que chegam a 16.828,94 kg de CO2 eq/km. Como solução, o estudo sugere a adoção de práticas sustentáveis, como o uso de pavimentos reciclados e a modernização dos equipamentos, para minimizar os impactos ambientais na construção de rodovias.

  • Open Access

    Avaliação do comportamento mecânico do solo estabilizado com asfalto utilizando emulsão asfáltica

    by Alexandre Simas de Medeiros, Claudeny Simone Alves Santana, Marcelino Aurélio Vieira da Silva

    A estabilização do solo com asfalto é uma técnica que pode melhorar as características mecânicas do solo, sendo uma opção viável tanto do ponto de vista econômico (reduzindo os custos com transporte de materiais) quanto ambiental (principalmente na fase construtiva, diminuindo as emissões relacionadas ao transporte e utilizando materiais locais, o que também reduz a exaustão de jazidas). Nesta pesquisa, foi utilizado um método de estabilização com baixos teores de asfalto e uma emulsão asfáltica de ruptura lenta. Analisou-se a influência da estabilização na ocorrência de shakedown. Os resultados demonstraram uma melhora no módulo resiliente (MR) e uma redução da deformação permanente (DP) do solo em comparação com o solo in natura, mas observou-se uma piora da DP em relação ao solo controle. O MR alcançou valores de 600 MPa no último ciclo de carregamento, enquanto a DP foi reduzida em aproximadamente 189%. Esses resultados indicam que a estabilização do solo com asfalto é uma técnica promissora para aplicações em pavimentação.

  • Open Access

    Evaluation of the Mechanical Behavior of Soil Stabilized with Asphalt Emulsion Using Multi-Stage Loading

    by A. S. De Medeiros, M. Hugo Sant’aNna Cardoso, M. Aurélio Vieira Da Silva

    The objective of this research was to assess the mechanical response (resilient and plastic) of soil stabilized with petroleum asphalt concrete using asphalt emulsion under multi-stage loading. To enhance the adhesion of the asphalt film to the soil grains, the stabilized soil underwent air-drying curing for seven days. Dosage was conducted through the indirect tensile strength test using diametral compression. With the optimum content determined in the dosage (2% emulsion), additions and removals of 0.5% asphalt emulsion from this content were performed. Consequently, three specimens were molded with concentrations of 1.5%, 2%, and 2.5% of slow-setting cationic asphalt emulsion. These specimens were then subjected to drained triaxial tests under multi-stage loading, using 5 different stress pairs, totaling 50,000 cycles. Analyzing the regions defined by the total and permanent deformation curves allowed studying the plastic and elastic response, the proportionality between these regions, and the increase in elastic and plastic regions of the soil and stabilized soil in a single test, providing a more accurate interpretation. Regarding the measured deformations, as the deviator stress was increased with each loading cycle, the stabilized samples exhibited an increase in plastic deformations compared to the natural soil (control). It was also observed a proportional increase in the resilient region, indicating that the addition of asphalt made the soil less rigid but provided cohesion that was absent before stabilization. Doi: 10.28991/CEJ-2024-010-01-02 Full Text: PDF