Dib Djalel
Dib Djalel has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Abdelghani Djeddi
Larbi Tebessi University
2 shared publications - Billel Meghni
Badji Mokhtar University of Annaba
1 shared publication - Dib Nour Elhouda
University of Sfax
1 shared publication - Houria Ababsia
Larbi Tebessi University
1 shared publication - Kadir Erkan
Department of Mechatronics Engineering, Yildiz Technical University, Istanbul, Turkey
1 shared publication - Moufida Saadi
University of Tebessa
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 15 (3) , 1180-1189
Sliding-mode assisted direct torque control for reliable wind turbine operation
This paper investigates and compares the performance of two advanced control strategies, direct torque control (DTC) and sliding mode control (SMC), applied to a permanent magnet synchronous generator (PMSG) used in wind energy conversion systems. The control schemes aim to ensure efficient energy conversion and stable operation under variable wind conditions. The comparison is carried out through detailed simulations considering electromagnetic torque response, stator flux behavior, speed regulation, and robustness to disturbances and parameter variations. The results show that DTC provides a fast dynamic response with a relatively simple control structure, but suffers from torque and flux ripples and sensitivity to parameter variations. In contrast, SMC demonstrates higher robustness against uncertainties and disturbances, with smoother torque characteristics and improved speed regulation. Overall, the study indicates that SMC is a promising approach for enhancing the stability and performance of PMSG-based wind energy systems. Future work may explore hybrid strategies combining the fast response of DTC with the robustness of SMC, as well as intelligent control techniques to further optimize energy extraction.
- 1 September 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 15 (3) , 1180-1189
Open AccessSliding-mode assisted direct torque control for reliable wind turbine operation
This paper investigates and compares the performance of two advanced control strategies, direct torque control (DTC) and sliding mode control (SMC), applied to a permanent magnet synchronous generator (PMSG) used in wind energy conversion systems. The control schemes aim to ensure efficient energy conversion and stable operation under variable wind conditions. The comparison is carried out through detailed simulations considering electromagnetic torque response, stator flux behavior, speed regulation, and robustness to disturbances and parameter variations. The results show that DTC provides a fast dynamic response with a relatively simple control structure, but suffers from torque and flux ripples and sensitivity to parameter variations. In contrast, SMC demonstrates higher robustness against uncertainties and disturbances, with smoother torque characteristics and improved speed regulation. Overall, the study indicates that SMC is a promising approach for enhancing the stability and performance of PMSG-based wind energy systems. Future work may explore hybrid strategies combining the fast response of DTC with the robustness of SMC, as well as intelligent control techniques to further optimize energy extraction.
- Open Access
- 1 March 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 15 (1) , 46-58
Robust SOC estimation for lithium-ion batteries under faulty charging scenarios using sliding mode observer techniques
With the growing demand for electric vehicles, embedded electronics, and renewable energy applications, lithium-ion batteries have become an essential component in modern energy storage systems. Accurate state of charge (SOC) estimation is crucial for ensuring battery reliability, longevity, and safety, particularly under faulty charging conditions—a challenge where many conventional estimation techniques fall short due to model limitations or lack of robustness. In this study, we propose an advanced SOC estimation approach based on a sliding mode observer (SMO) integrated with a third-order equivalent circuit model (ECM). Unlike conventional methods, which either focus on SOC estimation without considering battery voltage or apply SMO techniques only to second-order models, our approach enhances estimation accuracy by incorporating a higher-order model that better captures the complex battery dynamics. The proposed methodology is tested under both normal and faulty charging conditions, demonstrating superior performance in estimating both SOC and terminal voltage over extended periods. The simulation results confirm the robustness of the method, with accurate SOC tracking even in the presence of charging current faults, making it a viable solution for real-world applications in battery management systems (BMS). This work contributes to improving fault-tolerant SOC estimation strategies, advancing the development of safer and more efficient energy storage technologies.
- 1 March 2026
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 15 (1) , 46-58
Open AccessRobust SOC estimation for lithium-ion batteries under faulty charging scenarios using sliding mode observer techniques
With the growing demand for electric vehicles, embedded electronics, and renewable energy applications, lithium-ion batteries have become an essential component in modern energy storage systems. Accurate state of charge (SOC) estimation is crucial for ensuring battery reliability, longevity, and safety, particularly under faulty charging conditions—a challenge where many conventional estimation techniques fall short due to model limitations or lack of robustness. In this study, we propose an advanced SOC estimation approach based on a sliding mode observer (SMO) integrated with a third-order equivalent circuit model (ECM). Unlike conventional methods, which either focus on SOC estimation without considering battery voltage or apply SMO techniques only to second-order models, our approach enhances estimation accuracy by incorporating a higher-order model that better captures the complex battery dynamics. The proposed methodology is tested under both normal and faulty charging conditions, demonstrating superior performance in estimating both SOC and terminal voltage over extended periods. The simulation results confirm the robustness of the method, with accurate SOC tracking even in the presence of charging current faults, making it a viable solution for real-world applications in battery management systems (BMS). This work contributes to improving fault-tolerant SOC estimation strategies, advancing the development of safer and more efficient energy storage technologies.
- Open Access
- 1 June 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 14 (2) , 308-318
Optimization and dimensioning of stand-alone systems: enhancing MPPT efficiency through DLGA integration
This paper explores optimizing and sizing stand-alone solar power systems using an intelligent maximum power point tracking (MPPT) method, enhanced by artificial neural networks (ANN). The study focuses on both system sizing and energy optimization, integrating genetic algorithms (GA) with deep learning (DL) to optimize the architecture of the ANN for improved performance in predicting solar energy output. The hybrid method, deep learning genetic algorithms (DLGA), efficiently reduces computational complexity and enhances flexibility through parameter tuning, significantly improving the performance of multi-layer perceptron networks. Additionally, a precise sizing methodology based on solar irradiance data was implemented to ensure the system is neither oversized nor undersized. The system's performance was tested and validated using MATLAB/Simulink simulations, which demonstrated superior predictive accuracy, faster convergence, and optimized energy capture. This combined approach of intelligent MPPT and accurate sizing presents a highly effective solution for improving the efficiency and reliability of stand-alone solar energy systems under varying environmental conditions.
- 1 June 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 14 (2) , 308-318
Open AccessOptimization and dimensioning of stand-alone systems: enhancing MPPT efficiency through DLGA integration
This paper explores optimizing and sizing stand-alone solar power systems using an intelligent maximum power point tracking (MPPT) method, enhanced by artificial neural networks (ANN). The study focuses on both system sizing and energy optimization, integrating genetic algorithms (GA) with deep learning (DL) to optimize the architecture of the ANN for improved performance in predicting solar energy output. The hybrid method, deep learning genetic algorithms (DLGA), efficiently reduces computational complexity and enhances flexibility through parameter tuning, significantly improving the performance of multi-layer perceptron networks. Additionally, a precise sizing methodology based on solar irradiance data was implemented to ensure the system is neither oversized nor undersized. The system's performance was tested and validated using MATLAB/Simulink simulations, which demonstrated superior predictive accuracy, faster convergence, and optimized energy capture. This combined approach of intelligent MPPT and accurate sizing presents a highly effective solution for improving the efficiency and reliability of stand-alone solar energy systems under varying environmental conditions.
- Open Access
- 1 March 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 14 (1) , 180-187
Optimal control of the UPFC for the stability of electrical networks
The unified power flow controller (UPFC) is a crucial element in contemporary power systems, specifically engineered to augment the manageability and adaptability of power transmission in electrical networks. UPFC provides instantaneous modifications to voltage magnitude, phase angle, and line impedance by using sophisticated power electronics and control algorithms. This research examines the function of the unified power flow controller (UPFC) in enhancing the power quality of electrical networks. The UPFC's capacity to dynamically regulate and optimize power flow assists in minimizing voltage fluctuations, decreasing transmission line losses, and improving system stability. In addition, UPFC effectively addresses problems such as voltage sags, swells, and flickers, hence enhancing the resilience and dependability of the power supply. This research highlights the importance of unified power flow control (UPFC) technology in improving system performance and power quality of electrical networks via a thorough examination of its applications. This article presents research on the performance of the unified power flow controller (UPFC) device in a network, specifically focusing on the use of PID and FO-PID controllers for regulating active and passive power.
- 1 March 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Applied Power Engineering (IJAPE)
- Vol. 14 (1) , 180-187
Open AccessOptimal control of the UPFC for the stability of electrical networks
The unified power flow controller (UPFC) is a crucial element in contemporary power systems, specifically engineered to augment the manageability and adaptability of power transmission in electrical networks. UPFC provides instantaneous modifications to voltage magnitude, phase angle, and line impedance by using sophisticated power electronics and control algorithms. This research examines the function of the unified power flow controller (UPFC) in enhancing the power quality of electrical networks. The UPFC's capacity to dynamically regulate and optimize power flow assists in minimizing voltage fluctuations, decreasing transmission line losses, and improving system stability. In addition, UPFC effectively addresses problems such as voltage sags, swells, and flickers, hence enhancing the resilience and dependability of the power supply. This research highlights the importance of unified power flow control (UPFC) technology in improving system performance and power quality of electrical networks via a thorough examination of its applications. This article presents research on the performance of the unified power flow controller (UPFC) device in a network, specifically focusing on the use of PID and FO-PID controllers for regulating active and passive power.