Kunal Arora
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kunal Arora has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
Zepeng Chen
Shandong University of Technology Department of Mechanical Engineering Zibo
4 shared publicationsGuangyi Wu
3 shared publications- Anant Kumar Singh
Department of Mechanical Engineering, Thapar Institute of Engineering and Technology, Patiala, India
2 shared publications Cheng Qian
2 shared publicationsXiangyu Yuan
2 shared publicationsYebing Tian
2 shared publications
Latest Publications
- 17 November 2026
- Published by Emerald Publishing in Rapid Prototyping Journal
- p. 1-23
Surface-state-driven post-processing framework for additively manufactured titanium tubes using sustainable magnetorheological finishing
Purpose: Additive manufacturing of titanium alloys enables intricate part designs, yet this comes at the cost of poor surface quality, characterized by stair-step artifacts, partially fused particles and high roughness, which ultimately limits their practical applicability. This study aims to propose a surface-state-driven post-processing framework using sustainable magnetorheological polishing (S-MRP) to address AM-induced surface defects while preserving process sustainability. Design/methodology/approach: Selective laser melting (SLM) was used to fabricate Ti6Al4V titanium alloy microtubes using powder feedstock with an average particle size of 50 µm. A novel eco-friendly Sustainable Magnetorheological Polishing (S-MRP) fluid was subsequently developed and applied as a mechanical, rheology-based surface finishing technique for post-processing the additively manufactured specimens. The study establishes explicit correlations among SLM-fabricated surface characteristics, magnetorheological fluid behaviour and material removal mechanisms, thereby enabling controlled mechanical shear-based finishing without inducing thermal or chemical surface alterations. A response surface methodology (RSM) is used to optimize the interactive effects of tool rotation, workpiece rotation and tool reciprocation on surface evolution. The sustainability of the process is evaluated through life cycle assessment, comparing the developed fluid with a conventional formulation. Findings: Results demonstrate that the proposed framework enables deterministic surface-state transformation, reducing surface roughness from 2.4 to 0.28 µm (87 % improvement), while ensuring uniform defect removal and significantly improved surface morphology, reduced surface roughness and establishing a controlled surface-state transformation suitable for subsequent functional applications. The S-MRP fluid exhibits improved rheological stability, magnetic responsiveness and reduced sedimentation, contributing to consistent finishing performance. In addition, a cradle-to-gate life cycle assessment confirms that the sustainable formulation reduces global warming potential and fossil resource consumption compared to conventional fluids. Originality/value: This study advances additive manufacturing (AM) post-processing by integrating surface engineering, process optimization and sustainability, thereby offering a scalable pathway to enhance the functional performance of AM components. The proposed process significantly improves the surface quality of additively manufactured Ti-6Al-4V tubes and provides a promising post-processing strategy for components intended for demanding engineering applications. Application-specific qualification, however, requires further investigation.
- 17 November 2026
- Published by Emerald Publishing in Rapid Prototyping Journal
- p. 1-23
Surface-state-driven post-processing framework for additively manufactured titanium tubes using sustainable magnetorheological finishing
Purpose: Additive manufacturing of titanium alloys enables intricate part designs, yet this comes at the cost of poor surface quality, characterized by stair-step artifacts, partially fused particles and high roughness, which ultimately limits their practical applicability. This study aims to propose a surface-state-driven post-processing framework using sustainable magnetorheological polishing (S-MRP) to address AM-induced surface defects while preserving process sustainability. Design/methodology/approach: Selective laser melting (SLM) was used to fabricate Ti6Al4V titanium alloy microtubes using powder feedstock with an average particle size of 50 µm. A novel eco-friendly Sustainable Magnetorheological Polishing (S-MRP) fluid was subsequently developed and applied as a mechanical, rheology-based surface finishing technique for post-processing the additively manufactured specimens. The study establishes explicit correlations among SLM-fabricated surface characteristics, magnetorheological fluid behaviour and material removal mechanisms, thereby enabling controlled mechanical shear-based finishing without inducing thermal or chemical surface alterations. A response surface methodology (RSM) is used to optimize the interactive effects of tool rotation, workpiece rotation and tool reciprocation on surface evolution. The sustainability of the process is evaluated through life cycle assessment, comparing the developed fluid with a conventional formulation. Findings: Results demonstrate that the proposed framework enables deterministic surface-state transformation, reducing surface roughness from 2.4 to 0.28 µm (87 % improvement), while ensuring uniform defect removal and significantly improved surface morphology, reduced surface roughness and establishing a controlled surface-state transformation suitable for subsequent functional applications. The S-MRP fluid exhibits improved rheological stability, magnetic responsiveness and reduced sedimentation, contributing to consistent finishing performance. In addition, a cradle-to-gate life cycle assessment confirms that the sustainable formulation reduces global warming potential and fossil resource consumption compared to conventional fluids. Originality/value: This study advances additive manufacturing (AM) post-processing by integrating surface engineering, process optimization and sustainability, thereby offering a scalable pathway to enhance the functional performance of AM components. The proposed process significantly improves the surface quality of additively manufactured Ti-6Al-4V tubes and provides a promising post-processing strategy for components intended for demanding engineering applications. Application-specific qualification, however, requires further investigation.
- 25 March 2026
- Published by Elsevier in Precision Engineering
- Vol. 100, 513-523
Modeling of material removal rate for elastic-enhanced magnetorheological shear thickening polishing
- 25 March 2026
- Published by Elsevier in Precision Engineering
- Vol. 100, 513-523
Modeling of material removal rate for elastic-enhanced magnetorheological shear thickening polishing
- 3 July 2024
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
EXPERIMENTAL INVESTIGATION INTO MAGNETORHEOLOGICAL FINISHING OF POLYMER VALVE SEAT SURFACE FOR BALL VALVE PERFORMANCE
A polymer valve seat is an essential component of ball valves. However, a gas pipeline valve leakage during the gas or oil transportation process causes major issues. Therefore, the fine finishing of the polymer valve seat is important. This work describes the effect of the magnetorheological finishing (MRF) process on the surface characteristics of the polymer valve seat. To achieve a finely finished polymer valve seat surface, the best process parametric combination of current, workpiece rotational, and tool rotational speed are obtained using the response surface methodology. The optimum process parameters are further used to enhance surface characteristics (including surface roughness, microhardness, and surface morphology) through fine finishing. Using the optimum process conditions, the surface roughness was reduced to 110[ ]nm from 570[ ]nm in 140[ ]min of finishing on a 4878[ ]mm2 surface area of the polymer valve seat. The circularity of the valve seat surface’s dimensional correctness is investigated further. The current MRF process can fine-finish the polymer valve seat surface consistently, resulting in improved surface characteristics and functional performance.
- 3 July 2024
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
EXPERIMENTAL INVESTIGATION INTO MAGNETORHEOLOGICAL FINISHING OF POLYMER VALVE SEAT SURFACE FOR BALL VALVE PERFORMANCE
A polymer valve seat is an essential component of ball valves. However, a gas pipeline valve leakage during the gas or oil transportation process causes major issues. Therefore, the fine finishing of the polymer valve seat is important. This work describes the effect of the magnetorheological finishing (MRF) process on the surface characteristics of the polymer valve seat. To achieve a finely finished polymer valve seat surface, the best process parametric combination of current, workpiece rotational, and tool rotational speed are obtained using the response surface methodology. The optimum process parameters are further used to enhance surface characteristics (including surface roughness, microhardness, and surface morphology) through fine finishing. Using the optimum process conditions, the surface roughness was reduced to 110[ ]nm from 570[ ]nm in 140[ ]min of finishing on a 4878[ ]mm2 surface area of the polymer valve seat. The circularity of the valve seat surface’s dimensional correctness is investigated further. The current MRF process can fine-finish the polymer valve seat surface consistently, resulting in improved surface characteristics and functional performance.
- 22 June 2022
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 144 (11) , 1-53
Investigation of Surface Roughness in Novel Magnetorheological Finishing of the Internal Hemispherical-Shaped Acetabular Cup Workpieces
In today’s world, the hemispherical-shaped component’s fine finishing with high wear resistance and dimensional accuracy is required in different applications such as shells, molds, and implants. The magnetorheological finishing (MRF) method using a novel hemispherical tip-based tool is used to finish the hemispherical cups. The study aims to develop a novel theoretical mathematical model to predict the surface roughness reduction of the hemispherical cups using the present MRF process. Because the magnetic field regulates forces in the MRF process, the effect of the magnetic flux density (MFD) in the fine finishing of the hemispherical acetabular cup workpiece has been examined theoretically and experimentally. The mathematical model for reducing surface roughness is next tested experimentally on a hemispherical acetabular cup workpiece surface. The results of the predicted roughness match well with the experimental values with the error ranging from 1.17% to 6.15%. Further, surface morphology, microhardness, and dimensional accuracy tests are done on the workpiece using scanning electron microscopy, a microhardness tester, and coordinate measuring equipment to evaluate the efficacy of the present process. The present mathematical model for the MRF process predicts fine finishing along with the overall enhancement in the surface quality of the hemispherical acetabular cup surface.
- 22 June 2022
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 144 (11) , 1-53
Investigation of Surface Roughness in Novel Magnetorheological Finishing of the Internal Hemispherical-Shaped Acetabular Cup Workpieces
In today’s world, the hemispherical-shaped component’s fine finishing with high wear resistance and dimensional accuracy is required in different applications such as shells, molds, and implants. The magnetorheological finishing (MRF) method using a novel hemispherical tip-based tool is used to finish the hemispherical cups. The study aims to develop a novel theoretical mathematical model to predict the surface roughness reduction of the hemispherical cups using the present MRF process. Because the magnetic field regulates forces in the MRF process, the effect of the magnetic flux density (MFD) in the fine finishing of the hemispherical acetabular cup workpiece has been examined theoretically and experimentally. The mathematical model for reducing surface roughness is next tested experimentally on a hemispherical acetabular cup workpiece surface. The results of the predicted roughness match well with the experimental values with the error ranging from 1.17% to 6.15%. Further, surface morphology, microhardness, and dimensional accuracy tests are done on the workpiece using scanning electron microscopy, a microhardness tester, and coordinate measuring equipment to evaluate the efficacy of the present process. The present mathematical model for the MRF process predicts fine finishing along with the overall enhancement in the surface quality of the hemispherical acetabular cup surface.
- Open Access
- 30 December 2019
- Published by Current Research in Pharmaceutical Sciences in Current Research in Pharmaceutical Sciences
- Vol. 9 (4) , 63-66
A Review on Generic and Branded Drugs-Competence of Generic Drugs in Comparison to Branded Drugs
The use of generic or branded drug is a great matter of discussion in recent times globally. The government in different countries is also strictly promoting the use of generic drugs in place of branded ones. A generic drug consists of same active ingredient/ingredients as its branded counterpart and found to be equally efficient therapeutically. The cost of generic drugs are much lesser than the branded drugs as they do not need to go through the robust and costly pre-clinical or clinical studies as done in branded ones which increases the cost of them up to many folds. The present review enlightens the effectiveness of generic drugs as compared to branded drugs and how they work in body. An attempt is also made to highlight the cost comparison between both classes, the regulations and control pertaining to generic and branded drugs.
- 30 December 2019
- Published by Current Research in Pharmaceutical Sciences in Current Research in Pharmaceutical Sciences
- Vol. 9 (4) , 63-66
Open AccessA Review on Generic and Branded Drugs-Competence of Generic Drugs in Comparison to Branded Drugs
The use of generic or branded drug is a great matter of discussion in recent times globally. The government in different countries is also strictly promoting the use of generic drugs in place of branded ones. A generic drug consists of same active ingredient/ingredients as its branded counterpart and found to be equally efficient therapeutically. The cost of generic drugs are much lesser than the branded drugs as they do not need to go through the robust and costly pre-clinical or clinical studies as done in branded ones which increases the cost of them up to many folds. The present review enlightens the effectiveness of generic drugs as compared to branded drugs and how they work in body. An attempt is also made to highlight the cost comparison between both classes, the regulations and control pertaining to generic and branded drugs.
- 14 April 2015
- Published by SAE International in SAE International Journal of Engines
- Vol. 08 (4) , 1898-1905
Sizing of Coolant Passages in an IC Engine Using a Design of Experiments Approach
Determining coolant flow distribution in a topologically complex flow path for efficient heat rejection from the critical regions of the engine is a challenge. However, with the established computational methodology, thermal response of an engine (via conjugate heat transfer) can be accurately predicted [1, 2] and improved upon via Design of Experiment (DOE) study in a relatively short timeframe. This paper describes a method to effectively distribute the coolant flow in the engine coolant cavities and evenly remove the heat from various components using a novel technique of optimization based on an approximation model. The current methodology involves the usage of a sampling technique to screen the design space and generate the simulation matrix. Isight, a process automation and design exploration software, is used to set the framework of this study with the engine thermal simulation setup done in the CFD solver, STAR-CCM+. This is followed by the construction of a approximation model which aids in evaluating the interaction between the design variables (coolant passage dimensions). The methodology utilized here enables the prediction of the thermal map of the engine in the early stages of design and minimizes the need for expensive hardware testing, thus reducing the product development cycle time and cost.
- 14 April 2015
- Published by SAE International in SAE International Journal of Engines
- Vol. 08 (4) , 1898-1905
Sizing of Coolant Passages in an IC Engine Using a Design of Experiments Approach
Determining coolant flow distribution in a topologically complex flow path for efficient heat rejection from the critical regions of the engine is a challenge. However, with the established computational methodology, thermal response of an engine (via conjugate heat transfer) can be accurately predicted [1, 2] and improved upon via Design of Experiment (DOE) study in a relatively short timeframe. This paper describes a method to effectively distribute the coolant flow in the engine coolant cavities and evenly remove the heat from various components using a novel technique of optimization based on an approximation model. The current methodology involves the usage of a sampling technique to screen the design space and generate the simulation matrix. Isight, a process automation and design exploration software, is used to set the framework of this study with the engine thermal simulation setup done in the CFD solver, STAR-CCM+. This is followed by the construction of a approximation model which aids in evaluating the interaction between the design variables (coolant passage dimensions). The methodology utilized here enables the prediction of the thermal map of the engine in the early stages of design and minimizes the need for expensive hardware testing, thus reducing the product development cycle time and cost.