Deyanira Angeles-Beltrán
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Deyanira Angeles-Beltrán has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Edgar Oswaldo Leyva Cruz
Centro de Investigación y Estudios Avanzados del Instituto Politécnico Nacional, Doctorado en Ciencias (Nanociencias y Nanotecnología)
3 shared publications Refugio Rodríguez-Vázquez
Instituto Politécnico Nacional
2 shared publications- Gerardo Chavez-Esquivel
Ciencias basicas, Universidad Autonoma Metropolitana Azcapotzalco, Azcapotzalco, Cuidad de Mexico, MEXICO
1 shared publication - Jesús Andrés Tavizón-Pozos
Investigadores por México-SECIHTI, Universidad Autónoma del Estado de Hidalgo, Pachuca de Soto, México
1 shared publication - O A Luévano-Rivas
Centro de Innovación Aplicada en Tecnologías Competitivas, Omega no. 201 Col. Industrial Delta, León, Guanajuato, 37545, México
1 shared publication Refugio RodrígUez-VázQuez
Centro de Investigación y Estudios Avanzados del Instituto Politécnico Nacional Av. Instituto Politécnico Nacional 2508, Col. San Pedro Zacatenco, Delegación Gustavo A. Madero
1 shared publication
Latest Publications
- Open Access
- 18 November 2026
- Published by IOP Publishing in Materials Research Express
Role of Transition-Metal Centers in the Capture and Activation of Toxic and Greenhouse Gases on ZnO Nanoclusters: A DFT Study
The capture and molecular activation of atmospheric pollutants remain critical challenges in environmental catalysis and gas-sensing technologies. In this work, Density Functional Theory (DFT) calculations were performed to systematically investigate the interaction between transition metal-loaded (Cu²⁺, Ni²⁺, Fe²⁺, Pt²⁺, and Mn²⁺) (ZnO)₈ nanoclusters and key gaseous pollutants (CO₂, NO₂, and H₂S). The electronic influence of each transition metal was evaluated through HOMO-LUMO gap modifications, charge transfer analysis (Q), and structural deformations, including bond length and angle variations upon adsorption. Thermochemical analysis revealed spontaneous and energetically favorable adsorption for all studied gases. Notably, Fe- and Mn-loaded nanoclusters induced a dramatic narrowing of the HOMO-LUMO gap (to 0.421 eV and 0.478 eV, respectively), pointing to enhanced surface reactivity and conductivity. Furthermore, Fe-ZnO exhibited the strongest affinity for NO₂ capture (ΔG_"ads" =-40.98" kcal/mol" ), while Mn-ZnO demonstrated exceptional, highly stable, and versatile adsorption performance across all three gases. These atomistic insights position Fe and, remarkably, the underexplored Mn active centers as highly effective, low-cost alternatives to noble metals for the rational design of ZnO-based materials in gas capture and environmental remediation technologies.
- 18 November 2026
- Published by IOP Publishing in Materials Research Express
Open AccessRole of Transition-Metal Centers in the Capture and Activation of Toxic and Greenhouse Gases on ZnO Nanoclusters: A DFT Study
The capture and molecular activation of atmospheric pollutants remain critical challenges in environmental catalysis and gas-sensing technologies. In this work, Density Functional Theory (DFT) calculations were performed to systematically investigate the interaction between transition metal-loaded (Cu²⁺, Ni²⁺, Fe²⁺, Pt²⁺, and Mn²⁺) (ZnO)₈ nanoclusters and key gaseous pollutants (CO₂, NO₂, and H₂S). The electronic influence of each transition metal was evaluated through HOMO-LUMO gap modifications, charge transfer analysis (Q), and structural deformations, including bond length and angle variations upon adsorption. Thermochemical analysis revealed spontaneous and energetically favorable adsorption for all studied gases. Notably, Fe- and Mn-loaded nanoclusters induced a dramatic narrowing of the HOMO-LUMO gap (to 0.421 eV and 0.478 eV, respectively), pointing to enhanced surface reactivity and conductivity. Furthermore, Fe-ZnO exhibited the strongest affinity for NO₂ capture (ΔG_"ads" =-40.98" kcal/mol" ), while Mn-ZnO demonstrated exceptional, highly stable, and versatile adsorption performance across all three gases. These atomistic insights position Fe and, remarkably, the underexplored Mn active centers as highly effective, low-cost alternatives to noble metals for the rational design of ZnO-based materials in gas capture and environmental remediation technologies.
- Open Access
- 21 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (43) , 67251-67264
Beyond Redox Synergy: Role of Trivalent Cations in Ni-Based Layered Double Hydroxides for Peroxydisulfate Activation
The persistence of fluoroquinolone antibiotics in aquatic environments represents a growing environmental concern and requires efficient and scalable treatment strategies. In this study, ciprofloxacin degradation was investigated through persulfate activation by using Ni-based layered double hydroxides (LDHs). NiFe-LDHs with different molar ratios (1:1, 2:1, and 3:1) were synthesized and compared with NiAl-LDH to elucidate the role of the trivalent metal in the catalytic performance. A 22 factorial design was employed to evaluate the influence of the catalyst dosage and persulfate volume. All catalysts exhibited rapid removal, reaching approximately 57% removal within 20 min and up to 87% removal after 120 min. Increasing the Ni content did not improve the overall removal performance, indicating that activity is not directly governed by the amount of Ni present. Kinetic analysis followed pseudo-second-order behavior, while factorial results indicated that catalyst dosage had a stronger influence than the persulfate concentration. Mass spectrometry confirmed the disappearance of the parent ion (m/z 332), indicating an effective transformation of ciprofloxacin. Radical scavenger experiments indicated a greater contribution of radical species in the Fe-containing materials, whereas NiAl-LDH showed a more adsorption-driven removal pathway. No synergistic enhancement between Ni and Fe was observed, as NiAl-LDH exhibited comparable or superior performance despite containing the non-redox-active Al3+ center. Density functional theory (DFT) calculations revealed that Ni centers play a dominant role in persulfate activation, whereas the trivalent metal primarily modulates the electronic structure and the reaction pathway of the catalyst. These findings challenge the conventional assumption that the presence of multiple redox-active metal centers necessarily enhances the catalytic performance in LDH systems and highlight the critical role of the local electronic environment in designing efficient catalysts for environmental applications.
- 21 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (43) , 67251-67264
Open AccessBeyond Redox Synergy: Role of Trivalent Cations in Ni-Based Layered Double Hydroxides for Peroxydisulfate Activation
The persistence of fluoroquinolone antibiotics in aquatic environments represents a growing environmental concern and requires efficient and scalable treatment strategies. In this study, ciprofloxacin degradation was investigated through persulfate activation by using Ni-based layered double hydroxides (LDHs). NiFe-LDHs with different molar ratios (1:1, 2:1, and 3:1) were synthesized and compared with NiAl-LDH to elucidate the role of the trivalent metal in the catalytic performance. A 22 factorial design was employed to evaluate the influence of the catalyst dosage and persulfate volume. All catalysts exhibited rapid removal, reaching approximately 57% removal within 20 min and up to 87% removal after 120 min. Increasing the Ni content did not improve the overall removal performance, indicating that activity is not directly governed by the amount of Ni present. Kinetic analysis followed pseudo-second-order behavior, while factorial results indicated that catalyst dosage had a stronger influence than the persulfate concentration. Mass spectrometry confirmed the disappearance of the parent ion (m/z 332), indicating an effective transformation of ciprofloxacin. Radical scavenger experiments indicated a greater contribution of radical species in the Fe-containing materials, whereas NiAl-LDH showed a more adsorption-driven removal pathway. No synergistic enhancement between Ni and Fe was observed, as NiAl-LDH exhibited comparable or superior performance despite containing the non-redox-active Al3+ center. Density functional theory (DFT) calculations revealed that Ni centers play a dominant role in persulfate activation, whereas the trivalent metal primarily modulates the electronic structure and the reaction pathway of the catalyst. These findings challenge the conventional assumption that the presence of multiple redox-active metal centers necessarily enhances the catalytic performance in LDH systems and highlight the critical role of the local electronic environment in designing efficient catalysts for environmental applications.
- Open Access
- 11 August 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (15) , 155503
From metal adsorption to oxidant activation: a DFT study of Cu-, Co-, and Ni-loaded ZnO clusters
Density functional theory (DFT) calculations were employed to investigate the adsorption of Cu 2+ , Co 2+ , and Ni 2+ on ZnO and the subsequent interaction of persulfate (S 2 O 8 2− ) and hydrogen peroxide (H 2 O 2 ) with the resulting metal-loaded systems. A Zn 8 O 8 cluster was used as a model of the ZnO surface to evaluate adsorption thermodynamics, charge transfer, and structural changes induced by oxidant adsorption. Surface adsorption was thermodynamically preferred over substitutional incorporation for all transition metals. Metal loading significantly enhanced the interaction with persulfate compared with pristine ZnO. Co–ZnO exhibited the most favorable adsorption Gibbs free energy. In contrast, Cu–ZnO showed the largest charge transfer to the oxidant, indicating that different factors govern adsorption strength and electronic redistribution. Structural analysis revealed only minor variations in the O–O bond length of persulfate, suggesting that this parameter should be considered together with adsorption thermodynamics and electronic descriptors. For H 2 O 2 , distinct adsorption modes were identified depending on the incorporated metal. Cu- and Ni-loaded systems retained molecularly adsorbed H 2 O 2 , whereas Co–ZnO spontaneously formed a coordinated hydroperoxo (Co–OOH) intermediate through proton transfer. These results demonstrate that transition-metal adsorption modifies both the electronic properties and oxidant affinity of ZnO, supporting the potential reuse of metal-loaded ZnO materials as multifunctional catalysts for water remediation.
- 11 August 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (15) , 155503
Open AccessFrom metal adsorption to oxidant activation: a DFT study of Cu-, Co-, and Ni-loaded ZnO clusters
Density functional theory (DFT) calculations were employed to investigate the adsorption of Cu 2+ , Co 2+ , and Ni 2+ on ZnO and the subsequent interaction of persulfate (S 2 O 8 2− ) and hydrogen peroxide (H 2 O 2 ) with the resulting metal-loaded systems. A Zn 8 O 8 cluster was used as a model of the ZnO surface to evaluate adsorption thermodynamics, charge transfer, and structural changes induced by oxidant adsorption. Surface adsorption was thermodynamically preferred over substitutional incorporation for all transition metals. Metal loading significantly enhanced the interaction with persulfate compared with pristine ZnO. Co–ZnO exhibited the most favorable adsorption Gibbs free energy. In contrast, Cu–ZnO showed the largest charge transfer to the oxidant, indicating that different factors govern adsorption strength and electronic redistribution. Structural analysis revealed only minor variations in the O–O bond length of persulfate, suggesting that this parameter should be considered together with adsorption thermodynamics and electronic descriptors. For H 2 O 2 , distinct adsorption modes were identified depending on the incorporated metal. Cu- and Ni-loaded systems retained molecularly adsorbed H 2 O 2 , whereas Co–ZnO spontaneously formed a coordinated hydroperoxo (Co–OOH) intermediate through proton transfer. These results demonstrate that transition-metal adsorption modifies both the electronic properties and oxidant affinity of ZnO, supporting the potential reuse of metal-loaded ZnO materials as multifunctional catalysts for water remediation.
- Open Access
- 1 December 2024
- Published by IOP Publishing in Environmental Research Communications
- Vol. 6 (12) , 125014
Volcanic crop soil physicochemical characterization in semi-arid and temperate climates: two Mexican case studies
In this work, two crop soils were characterized: Querétaro (Bajío) and the State of Mexico (Edomex). Both states are part of the Sierra Madre Occidental, where temperate and subhumid climates are experienced. The surface soils are predominantly Leptosols in the Bajio and Andosols-Feozems in the Edomex. The dynamic mobility of water and fertilizers is associated with humic substances, mineralogical phases, metal dispersion, pore type, pore volume, and thermal behavior4 4 Behavior. . Both agricultural soils exhibited high porosity and surfaces with co-dispersion of Al3+/Si4+ and Ti4+/Fe2+,3+ ions and mixed mineralogical phases such as montmorillonite, anorthite, quartz, magnetite, goethite, hematite, and kaolinite. On the one hand, the C/N values for the Bajio-crop and Edomex-crop soils showed values of 15 and 11, respectively. On the other hand, the Bajio-crop and Edomex-crop soils showed C/O values of 0.38 and 0.42, respectively, indicating the accumulation of organic carbon and the presence of various humic substances. Finally, the Bajio-crop soil presented a higher surface area, pore diameter, and pore volume than the Edomex-crop soil, which is associated with high adsorption and nutrient retention. On the contrary, the Edomex-crop soil presented greater thermal resistance than the Bajio-crop soil, which is associated with a better capacity for heat dissipation during irrigation processes or fertilizer application.
- 1 December 2024
- Published by IOP Publishing in Environmental Research Communications
- Vol. 6 (12) , 125014
Open AccessVolcanic crop soil physicochemical characterization in semi-arid and temperate climates: two Mexican case studies
In this work, two crop soils were characterized: Querétaro (Bajío) and the State of Mexico (Edomex). Both states are part of the Sierra Madre Occidental, where temperate and subhumid climates are experienced. The surface soils are predominantly Leptosols in the Bajio and Andosols-Feozems in the Edomex. The dynamic mobility of water and fertilizers is associated with humic substances, mineralogical phases, metal dispersion, pore type, pore volume, and thermal behavior4 4 Behavior. . Both agricultural soils exhibited high porosity and surfaces with co-dispersion of Al3+/Si4+ and Ti4+/Fe2+,3+ ions and mixed mineralogical phases such as montmorillonite, anorthite, quartz, magnetite, goethite, hematite, and kaolinite. On the one hand, the C/N values for the Bajio-crop and Edomex-crop soils showed values of 15 and 11, respectively. On the other hand, the Bajio-crop and Edomex-crop soils showed C/O values of 0.38 and 0.42, respectively, indicating the accumulation of organic carbon and the presence of various humic substances. Finally, the Bajio-crop soil presented a higher surface area, pore diameter, and pore volume than the Edomex-crop soil, which is associated with high adsorption and nutrient retention. On the contrary, the Edomex-crop soil presented greater thermal resistance than the Bajio-crop soil, which is associated with a better capacity for heat dissipation during irrigation processes or fertilizer application.