Ke Zhan
Research Subjects
Ke Zhan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Yucheng Peng
College of Forestry, Wildlife and Environment, Auburn University, Auburn, AL 36849, USA
3 shared publications Brian Via
College of Forestry, Wildlife and Environment
2 shared publicationsThomas Elder
Southern Research Station USDA‐Forest Service Auburn Alabama USA
2 shared publications- Thomas Elder
Southern Research Station, USDA-Forest Service
2 shared publications - Bryan S. Beckingham
Department of Chemical Engineering, Auburn University, Auburn, AL 36849, USA
1 shared publication Chuanbing Tang
Department of Chemistry and Biochemistry University of South Carolina Columbia South Carolina USA
1 shared publication
Latest Publications
- 19 January 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (4) , 1858-1872
Reclaiming Polyethylene from Multilayer Plastic Packaging by Separating Oxygen Barrier Material Using Solvent-Based Selective Dissolution: Recycling Polyethylene for Property Characterization
- 19 January 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (4) , 1858-1872
Reclaiming Polyethylene from Multilayer Plastic Packaging by Separating Oxygen Barrier Material Using Solvent-Based Selective Dissolution: Recycling Polyethylene for Property Characterization
- 15 June 2025
- Published by Wiley in Macromolecular Chemistry and Physics
Morphology‐Controlled Rheological and Non‐Isothermal Crystallization Behaviors in Immiscible Polypropylene/High Density Polyethylene Blends
Understanding the correlation between morphology and the fundamental behavior of blends is crucial for tailoring their properties. This study investigated the effects of phase morphology on mechanical performance, rheology, and non‐isothermal crystallization kinetics of immiscible polypropylene (PP)/high‐density polyethylene (HDPE) blends. Nanometer‐scale HDPE phases dispersed within PP, co‐continuous phases, and micrometer‐scale PP phases dispersed within HDPE were formed at 75/25, 50/50, and 25/75 PP/HDPE weight ratios, respectively. Mechanical results indicated that the co‐continuous morphology dissipated energy more efficiently than the matrix‐dispersed morphology. Rheological results showed that nanometer‐scale dispersion significantly enhanced the blend elastic modulus through the restriction effect at the interfaces. Non‐isothermal crystallization kinetics were analyzed using Jeziorny‐modified Avrami, Ozawa, Mo, and Kissinger models. Due to HDPE's heterogeneous nucleation effect, the crystallization temperature of PP was elevated, and the crystallization rate of the blend also increased with higher HDPE content. Furthermore, the blend with the 25/75 PP/HDPE exhibited a higher crystallization rate than neat HDPE, as the interfacial boundaries facilitated the alignment of HDPE chains. The higher crystallization activation energy calculated in the 75/25 PP/HDPE blend suggested that nanometer‐scale dispersion imposed a more significant restriction on crystal growth compared to micrometer‐scale dispersion.
- 15 June 2025
- Published by Wiley in Macromolecular Chemistry and Physics
Morphology‐Controlled Rheological and Non‐Isothermal Crystallization Behaviors in Immiscible Polypropylene/High Density Polyethylene Blends
Understanding the correlation between morphology and the fundamental behavior of blends is crucial for tailoring their properties. This study investigated the effects of phase morphology on mechanical performance, rheology, and non‐isothermal crystallization kinetics of immiscible polypropylene (PP)/high‐density polyethylene (HDPE) blends. Nanometer‐scale HDPE phases dispersed within PP, co‐continuous phases, and micrometer‐scale PP phases dispersed within HDPE were formed at 75/25, 50/50, and 25/75 PP/HDPE weight ratios, respectively. Mechanical results indicated that the co‐continuous morphology dissipated energy more efficiently than the matrix‐dispersed morphology. Rheological results showed that nanometer‐scale dispersion significantly enhanced the blend elastic modulus through the restriction effect at the interfaces. Non‐isothermal crystallization kinetics were analyzed using Jeziorny‐modified Avrami, Ozawa, Mo, and Kissinger models. Due to HDPE's heterogeneous nucleation effect, the crystallization temperature of PP was elevated, and the crystallization rate of the blend also increased with higher HDPE content. Furthermore, the blend with the 25/75 PP/HDPE exhibited a higher crystallization rate than neat HDPE, as the interfacial boundaries facilitated the alignment of HDPE chains. The higher crystallization activation energy calculated in the 75/25 PP/HDPE blend suggested that nanometer‐scale dispersion imposed a more significant restriction on crystal growth compared to micrometer‐scale dispersion.
- 14 December 2024
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (11) , e2400724
Enhancing Polypropylene/Polyethylene Blend Performance Through Compatibilization for A Sustainable Future: A Mini Review Focusing on Establishing Bio‐Derived Filler Based Hybrid Compatibilizer System
Polypropylene (PP) and polyethylene (PE) are widely used polymers but significantly contribute to plastic waste. Effective recycling of PP and PE is essential for reducing plastic pollution and enhancing sustainability. Collection of post‐consumer PP and PE wastes forming comingled mixtures is routinely done due to the difficulty of sorting. While polymer blending offers a cost‐effective way to recycle these mixtures, their inherent immiscibility limits the development of high‐performance blends. This review provides an overview of recent advances in compatibilization strategies aimed at enhancing the PP/PE blend performance, with a focus on using bio‐derived fillers as sustainable compatibilizers. Mechanical properties of the PP/PE blends compatibilized by various approaches, including non‐reactive, reactive, and bio‐derived filler compatibilizations are summarized and discussed in terms of their advantages and weaknesses. Simultaneous incorporation of bio‐derived fillers and commercial compatibilizers potentially provides PP/PE blends with more desirable mechanical performance. Furthermore, the review summarizes the rheological and crystallization behaviors of compatibilized blends, emphasizing the significant impact of compatibilization on the processing‐structure‐property relationships within the blends. Current challenges and future directions in using bio‐derived fillers to enhance PP/HDPE compatibilization are discussed. This review provides insight into a sustainable future by endowing plastic waste with desirable properties for broader applications.
- 14 December 2024
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 46 (11) , e2400724
Enhancing Polypropylene/Polyethylene Blend Performance Through Compatibilization for A Sustainable Future: A Mini Review Focusing on Establishing Bio‐Derived Filler Based Hybrid Compatibilizer System
Polypropylene (PP) and polyethylene (PE) are widely used polymers but significantly contribute to plastic waste. Effective recycling of PP and PE is essential for reducing plastic pollution and enhancing sustainability. Collection of post‐consumer PP and PE wastes forming comingled mixtures is routinely done due to the difficulty of sorting. While polymer blending offers a cost‐effective way to recycle these mixtures, their inherent immiscibility limits the development of high‐performance blends. This review provides an overview of recent advances in compatibilization strategies aimed at enhancing the PP/PE blend performance, with a focus on using bio‐derived fillers as sustainable compatibilizers. Mechanical properties of the PP/PE blends compatibilized by various approaches, including non‐reactive, reactive, and bio‐derived filler compatibilizations are summarized and discussed in terms of their advantages and weaknesses. Simultaneous incorporation of bio‐derived fillers and commercial compatibilizers potentially provides PP/PE blends with more desirable mechanical performance. Furthermore, the review summarizes the rheological and crystallization behaviors of compatibilized blends, emphasizing the significant impact of compatibilization on the processing‐structure‐property relationships within the blends. Current challenges and future directions in using bio‐derived fillers to enhance PP/HDPE compatibilization are discussed. This review provides insight into a sustainable future by endowing plastic waste with desirable properties for broader applications.