James Wambua Kaluli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
James Wambua Kaluli has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Benson M. Mwangi
Department of Biological and Physical Sciences Murang'a University of Technology Murang'a Kenya
1 shared publication- Charles Kabubo
Jomo Kenyatta Univ Agr & Technol JKUAT, Dept Sustainable Mat Res & Technol Ctr SMARTEC, Juja, Kenya
1 shared publication George Thiong’o
Professor, Dept. of Chemistry, Jomo Kenyatta Univ. of Agriculture and Technology, P.O. Box 62000-00200, Nairobi, Kenya
1 shared publication- James Messo Raude
Soil, Water and Environmental Engineering Department, Jomo Kenyatta University of Agriculture and Technology, P.O. Box 62000-00200, Nairobi, Kenya
1 shared publication - Moise Ndekezi
Department of Civil Engineering, Pan African University's Institute for Basic Sciences, Technology and Innovation (PAUSTI), P. O. Box 62000-00200, Nairobi, Kenya
1 shared publication - Movin O. Oginga
Water and Environmental Engineering Department (SWEED) Soil Jomo Kenyatta University of Agriculture and Technology (JKUAT) Nairobi Kenya
1 shared publication
Latest Publications
- 1 September 2026
- Published by IWA Publishing in Water Practice & Technology
- Vol. 21 (9) , 4551-4569
Pollutant removal efficiency and reliability of sand dams as a sustainable in situ rainwater harvesting option in dryland environments: a case study from South-Eastern Kenya's drylands
The graphical abstract illustrates groundwater system fluxes in a sand dam, an in-situ rainwater harvesting system, showing key inflows (recharge from surface runoff) and outflows (evaporation, seepage, water abstraction) and major water uses. Water quality is assessed by comparing influent and effluent concentrations to determine pollutant removal efficiency. Positive removal efficiencies were observed for turbidity, TSS, dissolved oxygen, BOD, COD, ammonia, phosphates, iron, and copper, whereas negative removal efficiencies occurred for electrical conductivity, TDS, total hardness, fluoride, sulphates, nitrates, magnesium, zinc, chromium, and total coliforms. Overall, sand dams demonstrated high effectiveness in removing turbidity-related pollutants but limited reliability for salts, metals, and microorganisms. Drylands sustain billions of people and ecosystems. In Kenya, drylands cover 89% of the country, home to 36% of the population, 70% of the livestock and 90% of the wildlife. These groups are particularly vulnerable to water scarcity, mitigated through sand dams, an in situ rainwater harvesting technology. These function as natural slow sand filters to provide drinking water; yet, their filtration performance remains understudied. This study therefore examined their filtration capacity. Three sand dams were purposively selected and equipped with temporary sand-point wells to sample outflow, while stormwater inflow was sampled to assess removal efficiencies of 23 water quality parameters. A one-sample two-tailed t-test was used to evaluate whether the mean removal efficiency differed significantly from the assumed value. Results showed that 9 of the 22 parameters differed significantly from the hypothesized value of 60% (p < 0.05), whereas 13 did not (p ≥ 0.05). Sand dams effectively reduced suspended solids (85.68%), turbidity (86.94%) and iron (72.2%) but exhibited negative removal efficiencies for microorganisms and metals. Negative efficiencies may reflect environmental and operational complexities rather than treatment system failure. Therefore, water collected from sand dams for drinking should undergo household treatment such as boiling, chlorination or solar disinfection before consumption.
- 1 September 2026
- Published by IWA Publishing in Water Practice & Technology
- Vol. 21 (9) , 4551-4569
Pollutant removal efficiency and reliability of sand dams as a sustainable in situ rainwater harvesting option in dryland environments: a case study from South-Eastern Kenya's drylands
The graphical abstract illustrates groundwater system fluxes in a sand dam, an in-situ rainwater harvesting system, showing key inflows (recharge from surface runoff) and outflows (evaporation, seepage, water abstraction) and major water uses. Water quality is assessed by comparing influent and effluent concentrations to determine pollutant removal efficiency. Positive removal efficiencies were observed for turbidity, TSS, dissolved oxygen, BOD, COD, ammonia, phosphates, iron, and copper, whereas negative removal efficiencies occurred for electrical conductivity, TDS, total hardness, fluoride, sulphates, nitrates, magnesium, zinc, chromium, and total coliforms. Overall, sand dams demonstrated high effectiveness in removing turbidity-related pollutants but limited reliability for salts, metals, and microorganisms. Drylands sustain billions of people and ecosystems. In Kenya, drylands cover 89% of the country, home to 36% of the population, 70% of the livestock and 90% of the wildlife. These groups are particularly vulnerable to water scarcity, mitigated through sand dams, an in situ rainwater harvesting technology. These function as natural slow sand filters to provide drinking water; yet, their filtration performance remains understudied. This study therefore examined their filtration capacity. Three sand dams were purposively selected and equipped with temporary sand-point wells to sample outflow, while stormwater inflow was sampled to assess removal efficiencies of 23 water quality parameters. A one-sample two-tailed t-test was used to evaluate whether the mean removal efficiency differed significantly from the assumed value. Results showed that 9 of the 22 parameters differed significantly from the hypothesized value of 60% (p < 0.05), whereas 13 did not (p ≥ 0.05). Sand dams effectively reduced suspended solids (85.68%), turbidity (86.94%) and iron (72.2%) but exhibited negative removal efficiencies for microorganisms and metals. Negative efficiencies may reflect environmental and operational complexities rather than treatment system failure. Therefore, water collected from sand dams for drinking should undergo household treatment such as boiling, chlorination or solar disinfection before consumption.
- Open Access
- 14 April 2025
- Published by African Journals Online (AJOL) in Journal of Agriculture, Science and Technology
- Vol. 24 (1) , 139-160
A plant-based system for evaluating the health of wetlands in Mathioya watershed, Murang’a County, Kenya.
Wetlands in Mathioya watershed have been undergoing degradation over the past decades. This can be attributed to human activities such as farming within the wetlands, washing of cars in wetlands, and harvesting/clearing of wetland vegetation. Such activities are likely to impact on the health of the wetlands, which could lead to an overall loss of wetland function and ecosystem services. The aim of this study was to assess the health status of wetlands in Mathioya watershed, Murang’a County. Plant metrics and water quality parameters were used to develop the Plant Index of Biotic Integrity (PIBI). The PIBI was then used to evaluate the health of the wetlands in response to anthropogenic disturbance. The plant metrics selected to be included in the final PIBI include: number of tolerant species, sensitive species, exotic species and shrub species. A trisect interquartile method was then used to assign values to the core metrics. Scores from the selected four metrics were summed to come up with the final PIBI. The metric scores ranged between 4 and 20, with 4 being very poor health and 20 very good health. From the results, only two wetlands were of moderate health, six were of poor health, and one wetland was of very poor health. The average score shows that wetlands in Mathioya watershed are generally of poor health. This study concludes that the majority of the wetlands (6 out of 9) were of poor health, wetlands in areas with relatively low human activities were of better health. Therefore, a restoration project should be initiated to restore the ecological integrity of the wetlands.
- 14 April 2025
- Published by African Journals Online (AJOL) in Journal of Agriculture, Science and Technology
- Vol. 24 (1) , 139-160
Open AccessA plant-based system for evaluating the health of wetlands in Mathioya watershed, Murang’a County, Kenya.
Wetlands in Mathioya watershed have been undergoing degradation over the past decades. This can be attributed to human activities such as farming within the wetlands, washing of cars in wetlands, and harvesting/clearing of wetland vegetation. Such activities are likely to impact on the health of the wetlands, which could lead to an overall loss of wetland function and ecosystem services. The aim of this study was to assess the health status of wetlands in Mathioya watershed, Murang’a County. Plant metrics and water quality parameters were used to develop the Plant Index of Biotic Integrity (PIBI). The PIBI was then used to evaluate the health of the wetlands in response to anthropogenic disturbance. The plant metrics selected to be included in the final PIBI include: number of tolerant species, sensitive species, exotic species and shrub species. A trisect interquartile method was then used to assign values to the core metrics. Scores from the selected four metrics were summed to come up with the final PIBI. The metric scores ranged between 4 and 20, with 4 being very poor health and 20 very good health. From the results, only two wetlands were of moderate health, six were of poor health, and one wetland was of very poor health. The average score shows that wetlands in Mathioya watershed are generally of poor health. This study concludes that the majority of the wetlands (6 out of 9) were of poor health, wetlands in areas with relatively low human activities were of better health. Therefore, a restoration project should be initiated to restore the ecological integrity of the wetlands.
- 1 May 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Construction Engineering and Management
- Vol. 143 (5)
Soil Stabilization Using Rice Husk Ash and Natural Lime as an Alternative to Cutting and Filling in Road Construction
Pavement construction tends to be relatively expensive in areas where expansive clay forms the bulk of the alignment soil. The common practice in Kenya is to remove the undesirable material and fill the space with more stable materials. The present study has developed a method for stabilizing expansive clay for Subgrade Class S2 pavement construction. A combination of 20% by weight of rice husk ash (RHA) and approximately 2% by weight of natural lime improved the California bearing ratio (CBR) of expansive clay soil by 800%, reduced the soil plasticity by approximately 90%, and decreased free swell by approximately 70%. It has been shown that use of RHA as a stabilizer is not only an affordable green technology, but also gives expansive clays the strength required for the Subgrade Class S2 pavement layer.
- 1 May 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Construction Engineering and Management
- Vol. 143 (5)
Soil Stabilization Using Rice Husk Ash and Natural Lime as an Alternative to Cutting and Filling in Road Construction
Pavement construction tends to be relatively expensive in areas where expansive clay forms the bulk of the alignment soil. The common practice in Kenya is to remove the undesirable material and fill the space with more stable materials. The present study has developed a method for stabilizing expansive clay for Subgrade Class S2 pavement construction. A combination of 20% by weight of rice husk ash (RHA) and approximately 2% by weight of natural lime improved the California bearing ratio (CBR) of expansive clay soil by 800%, reduced the soil plasticity by approximately 90%, and decreased free swell by approximately 70%. It has been shown that use of RHA as a stabilizer is not only an affordable green technology, but also gives expansive clays the strength required for the Subgrade Class S2 pavement layer.