VDVolodymyr Doskoch

Volodymyr Doskoch

*This is an algorithmically generated author record based on publicly available information.

Volodymyr Doskoch has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    АНАЛІЗ ВПЛИВУ НЕЯКІСНОЇ ЖИВЛЯЧОЇ НАПРУГИ НА РОБОЧІ ХАРАКТЕРИСТИКИ АСИНХРОННИХ ДВИГУНІВ У НЕРЕГУЛЬОВАНИХ ЕЛЕКТРОПРИВОДАХ

    by Володимир Ігорович Доскоч, Олексій Юрійович Балійчук

    У статті досліджено вплив зниження якості електричної енергії на технічні показники роботи систем нерегульованого асинхронного електроприводу технологічного обладнання підприємств залізничного транспорту. Обґрунтовано актуальність тематики в умовах нестабільності параметрів живлячої напруги, спричиненої дефіцитом генеруючих потужностей в наслідок пошкодження об’єктів енергетичної інфраструктури. Виконано аналіз складу та розподілу потужностей електроприводів критично важливого обладнання локомотивних депо, за результатами якого встановлено, що більшість приводів має потужність до 5 кВт, що створює передумови для впровадження локальних резервних джерел електропостачання. На основі модифікованого виразу формули Клосса отримано сукупності механічних характеристик асинхронних двигунів із урахуванням усталеного відхилення напруги в діапазоні, характерному для реальних умов експлуатації мереж напругою 0,4 кВ. Визначено гранично допустимі значення відхилення напруги, за яких забезпечуються необхідні умови пуску, перевантажувальна здатність та стійкість роботи електроприводів різних типорозмірів. Показано, що електроприводи механізмів із сталим моментом статичного опору є найбільш чутливими до зниження напруги, тоді як приводи турбомеханізмів характеризуються вищою стійкістю. Експериментальні дослідження, виконані на стенді взаємного навантаження, підтвердили адекватність аналітичного підходу до побудови механічних характеристик при зміні напруги живлення. Отримані результати дозволяють кількісно оцінювати вплив неякісної електроенергії на працездатність електроприводів, прогнозувати ресурс обладнання та обґрунтовувати доцільність застосування резервних систем електропостачання, зокрема на основі відновлюваних джерел енергії для забезпечення безперервності технологічних процесів.

  • Open Access

    EXPERIMENTAL SETUP FOR DETERMINING THE COORDINATES OF AN ASYNCHRONOUS ELECTRIC DRIVE USING A MUTUAL LOAD STAND

    by В. І. Доскоч, O. Baliichuk, О. Ю. Балійчук

    Purpose. The work is aimed at developing a methodology for experimental research into the influence of reduced supply voltage on the operating and mechanical characteristics of squirrel-cage induction motors with a power of up to 5 kW. The research is focused on critically important technological equipment of railway transport enterprises (locomotive depots, repair plants), which in modern conditions is often operated in power supply modes with low quality indicators. Methods. The work uses a comprehensive analysis of the technical equipment of railway enterprises, analytical methods for studying the properties of asynchronous machines, and methods for mathematical analysis of test results. The experimental part is based on the method of direct loading on a mutual load stand, where a DC machine with independent excitation is used as a braking device. The process includes preliminary measurement of the characteristics of idling and non-working speed for calibrating the measuring system. Results. A scheme of an experimental stand has been developed and practically tested, allowing to fix the coordinates of the electric drive (torque, speed, current) in a wide range of loads. It has been established that the use of a P-42 type generator as a loading device allows to create a regulated braking torque from 0 to 35 N∙m. This provides the possibility of modeling the operating modes of asynchronous motors with a capacity of up to 5 kW with a variation of the supply voltage. The described metrological base confirms the high accuracy of the obtained data for the further construction of real mechanical characteristics. Originality. The author first proposed to use a mutual load stand with a DC generator of proportional power to the engine, operating on a network with regulated voltage, specifically to assess the stability of non-traction railway consumers in conditions of unstable power supply. The method of direct loading of low-power machines has also been further developed, which, unlike analytical models, allows taking into account real electromagnetic processes in conditions of deviation of network parameters from nominal values. Practical significance. The obtained methodology and bench test results are the initial data for predictive modeling of the stability of industrial equipment operation at railway repair enterprises. The practical application of the results will allow developing technical recommendations for protecting critical equipment from the negative impact of low-quality electricity, as well as justifying the implementation of voltage compensation measures and the use of renewable energy sources for the uninterrupted operation of locomotive depots.

  • Open Access

    METHOD FOR ASSESSING THE PERFORMANCE OF CRITICAL ELECTRIC DRIVEN EQUIPMENT OF RAILWAY TRANSPORT ENTERPRISES IN NON-NOMINAL POWER NETWORK CONDITIONS

    by В. І. Доскоч, O. Baliichuk, О. Ю. Балійчук

    Purpose. Analyse the effect of supply voltage changes on the performance of an asynchronous motor operating under typical loads in order to determine the limit values of voltage deviations when it is impossible to start and ‘roll over’ the motor. The relevance of the study is confirmed by the fact that traction units – locomotives – occupy a special place among the rolling stock of railways. Methods. Comprehensive analysis of technical equipment and technology of railway transport, analytical methods for studying the operating properties of asynchronous electric motors, methods of mathematical analysis. Results. Technological processes of repair and maintenance of rolling stock in depots and repair enterprises are largely associated with the use of industrial equipment equipped with an electric drive. Most often, this electric drive is asynchronous. Power supply of industrial railway transport enterprises, as well as railway nodes themselves, is carried out from the United Energy System of Ukraine, which during the full-scale invasion is subjected to significant terrorist attacks. This leads to a decrease in the qualitative and quantitative indicators of electric energy both in the country as a whole and at industrial enterprises of railways in particular. In order to determine the potential operability of critically important equipment of railway enterprises in conditions of low-quality electric energy supply, an assessment method is proposed, based on the analysis of the mechanical characteristics of asynchronous electric drives taking into account the real conditions of their operation. As a criterion for assessing the potential performance of an electric drive, it is proposed to use the combined mechanical characteristics of the drive motor and the working body, taking into account real operating conditions. The results of the analysis of their mutual placement allow us to draw a conclusion regarding the stability of the electric drive. Originality. An engineering method for determining the limit values of the steady-state deviation of the supply voltage, provided that the starting torque and overload capacity of the engine are provided, based on its catalog data, is proposed. Practical significance. The results obtained can be used as input data for predictive modeling of the stability of the operation of critical equipment when they are supplied with electrical energy with low qualitative and quantitative indicators. Based on the results obtained, a number of recommendations can be developed regarding the organization of uninterrupted power supply of such non-traction consumers of railway transport using energy from renewable sources. The research material can be used in the implementation of measures to compensate for the negative impact of quantitative and qualitative indicators of the supply of electrical energy on the reliability of non-traction consumers of railway transport.

  • Open Access

    DETERMINATION OF A NUMBER OF PARAMETERS OF ELECTRIC DRIVES OF CRITICAL EQUIPMENT OF RAILWAY TRANSPORT ENTERPRISES AS INPUT DATA FOR MODELING THE STABILITY OF THEIR OPERATION

    by В. І. Доскоч, O. Baliichuk, О. Ю. Балійчук

    Purpose. Ensuring a reliable transportation process by rail directly depends on the technical condition of the traction rolling stock and its timely supply for the performance of train work. Maintaining railway rolling stock in a technically sound condition requires an appropriate material and technical and production base of locomotive depots and repair enterprises. Servicing traction rolling stock in the scope of technical maintenance and current repairs involves equipping traction units with fuel and lubricants, water and sand. For this purpose, appropriate units equipped with specific technological equipment are organized in locomotive depots. As a rule, such technological equipment has an electric drive built on the basis of asynchronous electric motors. Powering these electric motors with low-quality electric energy or unstable electric energy creates potentially negative conditions for their long-term operation. In order to further apply methods of predictive modeling of the stability of the operation of electrical equipment of locomotive equipment points, a thorough analysis was conducted and the parameters of the electric drives of the most critically important equipment were determined. Methods. Comprehensive analysis of technical equipment and technology of railway transport. Results. It was established that the most labor-intensive among all the processes of equipping rolling stock is the process of equipping with sand, which is associated both with the specifics of sand, both as a working medium, and with increased requirements for its purity and humidity. A list of critically important electrical equipment was identified to ensure the technological process of preparing, transporting, storing and issuing sand to rolling stock. The parameters of the electric drives of the compressor unit, smoke exhausters, the furnace blowing device and the movement of the rotary drying drum were established. The obtained data were analyzed. Practical significance. The results obtained allow to form unified series of capacities of electric drives of equipment of locomotive depots and repair enterprises of railway transport, which can be used as initial data for prognostic modeling of stability of operation of this equipment when they are supplied with electric energy with low qualitative and quantitative indicators. Also, on the basis of the obtained results, a number of recommendations can be developed regarding the organization of uninterrupted power supply of such non-traction consumers of railway transport using energy from renewable sources. Also, the research material can be used in the implementation of measures to compensate for the negative impact of quantitative and qualitative indicators of supply electric energy on the reliability of non-traction consumers of railway transport.

  • Scientific basis of analysis and synthesis of optimal energy-efficient control of electromechanical systems

    by National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Roman Voliansky, Vitaliy Kuznetsov, Ukrainian State University of Science and Technologies, Volodymyr Doskoch, Oleksandr Tkalenko, Dnipro University of Technology

    The authors' achievements in the field of development of control systems theory, where high-order sliding modes are implemented, was presented. Original methods for optimizing the accuracy of automatic ¬control systems for electric drives with nonlinear activation functions were outlined. The dynamic and static characteristics of control systems with nonlinear control algorithms were considered, and their stability was analyzed. For scientific and technical workers engaged in the research, design and operation of modern automatic control systems, as well as for students and post-graduate students of relevant specialties

  • Open Access

    SYNTHESIS OF THE SYSTEM OF STABILIZATION OF THE ROTATION FREQUENCY OF THE ASYNCHRONOUS MOTOR OF THE ELECTRIC DRIVE OF THE ROTOR WHEEL OF THE EXCAVATOR ERSHR-1600 OF THE POKROVSKY QUARRY

    by Volodymyr Doskoch, Oleg Kitayev, Oleg Stepanenko, Serhii Siverskyi, Vladyslav Lysenko, Sergii Zirnieiev, Ievgen Gurin, Viktor Kovalenko

    Object of research: Energy conversion in an electric drive with asynchronous motors. Subject of research: The static and dynamic characteristics of the electric drive of the rotor wheel of the ERShR-1600 rotary excavator, focusing on the frequency convert