HLHaoran Li

Haoran Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Haoran Li has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Low-Jitter mm-Wave Fractional-N Sub-Sampling PLL Using a Polarity-Reversible SSPD for DTC Range Reduction

    by Haoran Li, Jinge Li, Xueying Jiang, Xi Meng, Pui-In Mak, Rui P. Martins, Jun Yin

    This article presents a millimeter-wave (mm-Wave) band fractional-N sub-sampling PLL (SSPLL) that achieves low jitter, low spur, and fast-locking time. The proposed polarity-reversible sub-sampling phase detector (PR-SSPD) reduces the digital-to-time converter (DTC) range, improving its noise and non-linearity performance, which results in low in-band phase noise (PN) and fractional spurs. The dual-core function-reused (FR) VCO-buffer, utilizing a high-Q circular transformer, improves out-of-band PN while maintaining a low reference spur. These techniques enable the SSPLL to achieve low jitter at the mm-Wave band. Additionally, a low-power digital frequency-locked loop (FLL) based on time-to-digital converters (TDCs) is proposed, which adopts automatic TDC gain calibration to realize fast-locking time. Fabricated in 28-nm CMOS, the SSPLL prototype consumes 32.2 mW using a reference clock of 120 MHz. It achieves an rms jitter of 57.9 fs and fractional spurs below −55.2 dBc at the near-integer fractional-N channel around 27 GHz, corresponding to an excellent FoMJ of −249.7 dB. The measured locking time at a 2.88-GHz frequency jump is $1.98~{\mu }$ s (238 reference cycles). The SSPLL occupies a compact area of 0.098 mm2.


  • An 18.4 GHz Low-Jitter and Fast-Locking Fractional- N Digital PLL Using Function-Reused TDC and Path-Selection BBPDs

    by Xi Meng, Haoran Li, Peng Chen, Jun Yin, Rui P. Martins, Pui-In Mak

    This work presents an 18.4 GHz fractional-N digital phase-locked loop (DPLL) featuring a novel digital phase and frequency detector (PFD), which combines the functions of the time-to-digital converter (TDC) and the path-selection bang-bang phase detectors (PS-BBPDs), achieving fast-locking time and low jitter with little hardware and power overhead. During the locking transient, the PFD functions as a TDC, ensuring a large lock-in range and accelerating the locking process. In the locked state, it functions as a PS-BBPDs to compensate quantization error (QE) with minimal thermal noise. The residual QE after the PS-BBPDs is compensated by a fine digital-to-time converter (F-DTC), which only needs to cover one LSB of the PS-BBPDs, ensuring low thermal noise and better linearity. Fabricated in a 28-nm CMOS technology, the proposed DPLL employs a 100-MHz reference (REF) clock, consumes 14.83-mW power, and occupies an active area of 0.11 mm2. At a fractional channel of 18.4066 GHz, it achieves an rms jitter of 124 fs. The measured worst case fractional spurs across all fractional frequency control words (FCWs) near 18.4 GHz remain below −54.8 dBc. At a frequency hopping of ±1.6 GHz, the DPLL achieves locking within 334 REF cycles ( $3.34~\mu $ s) with an accuracy of <60 ppm.


  • Analysis and Design of a Type-II Reference-Sampling PLL Using Gain-Boosting Phase Detector With Sampling Capacitor Reduction

    by Tailong Xu, Haoran Li, Xi Meng, Xiangxun Zhan, Yatao Peng, Jun Yin, Shiheng Yang, Chao Fan, Zhixiang Huang, Rui P. Martins, et al.

    This brief analyzes the phase noise (PN) and reference (REF) spur performance of the reference-sampling (RS) PLL when the total sampling capacitor $(C_{\mathrm { S}})$ is reduced to save the power consumption of the crystal oscillator (XO) buffer. Based on the analysis, the saved power consumption from the XO buffer can be utilized to improve the PN of the voltage-controlled oscillator (VCO), which compensates for the in-band PN degradation induced by the $C_{\mathrm { S}}$ reduction. Based on this theme, we can reduce the total power consumption of the RS-PLL and the XO buffer without degrading the output root-mean-square (RMS) jitter by reducing $C_{\mathrm { S}}$ if a VCO with a high figure-of-merit (FoM) and a low $1/{f}^{3}$ PN corner frequency is available. A type-II RS-PLL prototype utilizing a gain-boosting RS phase detector to suppress the voltage-to-current $(G_{\mathrm { M}})$ circuit noise is designed to verify the presented design strategy. With the aid of an inverse-class-F VCO with a FoM of 190.4 dBc/Hz at 1 MHz offset frequency and a $1/{f}^{3}$ PN corner frequency of 300 kHz across the frequency tuning range from 5.2 GHz to 6.1 GHz, the RS-PLL prototype fabricated in a 65-nm CMOS achieves low RMS jitter and REF spur of 64.8 fs and -84.1 dBc, respectively, while dissipating 6.9 mW, corresponding to a jitter-power FoM ( $\rm FoM{_{J}}$ ) of -255.4 dB.


  • A 23.2-to-26-GHz Low-Jitter Fast-Locking Sub-Sampling PLL Based on a Function-Reused VCO-Buffer and a Type-I FLL With Rapid Phase Alignment

    by Haoran Li, Tailong Xu, Xi Meng, Jun Yin, Rui P. Martins, Pui-In Mak

    This article presents a type-II sub-sampling phase-locked loop (SSPLL) that achieves low jitter, low spur, and sub- $\mu$ s locking time when synthesizing millimeter-wave (mm-wave) frequencies. The proposed function-reused (FR) voltage-controlled oscillator (VCO)-buffer eliminates the noise and capacitive loading from the transistors in the buffer, improving the jitter and reference (ref.) spur of the SSPLL simultaneously. It also eliminates the inductor typically employed in the high-frequency buffer, reducing the chip area. The proposed low-power fast frequency-locked loop (FLL) utilizes a phase aligner to decouple the dependency of the locking time on the initial phase error. The FLL also employs a coarse-fine-time-to-digital converter (TDC)-based type-I loop for promptly searching the control word of the switched capacitors (SCs). This article also details the analysis of the ref. spur and the phase noise (PN) performance using the FR VCO-buffer as well as the design considerations of the proposed FLL. Fabricated in 28-nm CMOS, the SSPLL occupies a compact area of 0.065 mm 2 and achieves an rms jitter of 48.3 fs at 26 GHz while consuming 19.1 mW, corresponding to excellent FoM $_{J}$ and FoM $_{N}$ of $-$ 253.5 and $-$ 277.6 dB, respectively. The measured ref. spur is $-$ 66 dBc, and the measured locking time at a frequency jump from 0.4 to 2.8 GHz is within 55 ref. cycles.