IMIlgiz F. Minkhanov

Ilgiz F. Minkhanov

*This is an algorithmically generated author record based on publicly available information.

Ilgiz F. Minkhanov has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Перспективы применения комбинированных гуаро-боратных бинарных термохимических композиций для гидроразрыва пласта в «холодных» пластах

    by И.и. Маннанов, Г.р. Ганиева, О.в. Аникин, А.р. Тазеев, И.ф. Минханов

    Гидравлический разрыв пласта (ГРП) является ключевым методом разработки трудноизвлекаемых запасов углеводородов. Его эффективность в низкотемпературных коллекторах лимитируется замедленной и неполной деструкцией полимерного геля жидкостей разрыва на основе гидроксипропилгуара, что приводит к значительному остаточному повреждению проводимости трещин и прискважинной зоны пласта. В представленной работе исследуется подход к модификации традиционных гуаро-боратных систем путём введения бинарных термохимических реагентов, обеспечивающих контролируемую активацию экзотермической реакции непосредственно в пластовых условиях. Ключевым аспектом является индуцирование in situ процесса, сочетающего термическое разложение полимерной матрицы, генерацию давления и газодинамический эффект, направленных на полную деструкцию геля до ньютоновской жидкости с вязкостью ~1,1 мПа•с. Лабораторные исследования подтвердили, что разработанная композиция сохраняет стабильные реологические свойства на этапе закачки (вязкость сшитого геля >500 cP при 100 с⁻¹), а последующая активация кислотным агентом обеспечивает быстрый рост температуры до 73–83 °C и полную деградацию геля. Установлено, что использование поверхностно-активных веществ в составе активатора позволяет генерировать стабильные пенные системы с кратностью до 25, способствующие механическому вытеснению продуктов деструкции из порового пространства. Показано, что вторичными, но значимыми эффектами технологии являются очистка породы от кольматантов и создание термических условий для закрепления проппанта со смоляным покрытием (RCP). Результаты работы демонстрируют потенциал применения термохимических композиций для решения фундаментальной проблемы остаточного повреждения низкотемпературных пластов неразрушенными полимерными остатками. Hydraulic fracturing (HF) is a key method for developing hard-to-recover hydrocarbon reserves. Its effectiveness in low-temperature reservoirs is limited by the delayed and incomplete degradation of the polymer gel in hydroxypropylguar (HPG)-based fracturing fluids, leading to significant residual damage to fracture and near-wellbore zone conductivity. This paper investigates an approach to modifying conventional guar-borate systems by introducing binary thermochemical reagents that provide controlled activation of an exothermic reaction directly under reservoir conditions. A key aspect is the induction of an in situ process that combines thermal decomposition of the polymer matrix, pressure generation, and a gas-drive effect, aimed at the complete degradation of the gel into a Newtonian fluid with a viscosity of ~1.1 mPa·s. Laboratory studies confirmed that the developed composition maintains stable rheological properties during the injection stage (crosslinked gel viscosity >500 cP at 100 s⁻¹), while subsequent activation by an acid agent ensures a rapid temperature increase to 73–83 °C and complete gel degradation. It was established that using surfactants within the activator composition enables the generation of stable foam systems with a quality of up to 25, which facilitates the mechanical displacement of degradation products from the pore space. It is shown that secondary, yet significant, effects of the technology include the cleanup of formation damage (clays, mud) and the creation of thermal conditions for the consolidation of resin-coated proppant (RCP). The results demonstrate the potential of using thermochemical compositions to address the fundamental problem of residual damage in low-temperature reservoirs caused by undegraded polymer residues.

  • Open Access

    Gas enhanced oil recovery methods for offshore oilfields: Features, implementation, operational status

    by Oleg V. Anikin, Vadim K. Derevyanko, Alexander V. Bolotov, Ilgiz F. Minkhanov, Mikhail A. Varfolomeev, Emilia A. Konstantinovich, Valeria A. Kadysheva


  • Selection of optimal EOR for extra-heavy crude oil displacement from low-permeability reservoirs

    by V. K. Derevyanko, A. V. Bolotov, I. F. Minkhanov, M. A. Varfolomeev

  • Experimental and Numerical Analysis of Thermal EOR Recovery Schemes for Extra-Heavy Oil of the Oykino-Altuninsky Uplift of the Romashkinskoye Oilfield

    by Anastasia Pituganova, Taofik Nassan, Mohd Amro, Ilgiz Minkhanov, Mikhail Varfolomeev, Alexander Bolotov

    Crude oil production from conventional oil reservoirs is declining owing to heavy exploitation to meet the global energy market demand which is growing on a yearly basis. Unconventional oil resources, e.g. extra-heavy oil and bitumen, can compensate for this decline if appropriate enhanced oil recovery (EOR) methods are developed to enable economic flow from these resources. The main objective of this study is to set the best practice for the extra-heavy oil production of the Oykino-Altuninsky uplift of the Romashkinskoye oilfield (Tatarstan Republic, Russia). A series of experimental tests are applied on a real unextracted unconsolidated core sample from Romashkinskoye oilfield where the viscosity of the crude oil is above 600,000 cP at reservoir conditions. Different recovery schemes are tested experimentally and sequentially, namely: water flooding, hot water flooding, steam flooding, and finally in-situ combustion (ISC). Furthermore, the complete experimental run is simulated by a standard nonisothermal simulator and the results are compared to the experiments. On contrary to what was expected hot water at 100°C didn’t achieve any recovery from the sample and steam injection recovered only 11,5% of OOIP. ISC-is also known as fire flooding-attained the best recovery which reached 45% after steam flooding. Complete SARA analysis of the original oil and produced oil by steam and ISC is implemented to understand the mechanisms of each process. Numerical modeling is applied to the corresponding laboratory experiments and the results for water, hot water, and steam flooding were in good agreement with the experimental results while the in-situ combustion simulation showed a better recovery factor than experiments. The laboratory and numerical experiments will improve our understanding of the recovery options of Oykino-Altuninsky uplift of the Romashkinskoye oilfield and help the developers to choose the best production sequence for this oilfield particularly. Moreover, the experiments will provide inputs for the field-size numerical model after running more experiments on unconsolidated and consolidated cores.