Eleonora Sofia Cama
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Eleonora Sofia Cama has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Mariacecilia Pasini
Istituto di Scienze e Tecnologie Chimiche “G. Natta”, Consiglio Nazionale delle Ricerche, CNR-SCITEC, Via Corti 12, 20133 Milan, Italy
7 shared publications - Umberto Giovanella
Institute of Chemical Sciences and Technologies (SCITEC), National Research Council (CNR), Via Alfonso Corti, 20133 Milan, Italy
6 shared publications - Francesco Galeotti
Institute of Chemical Sciences and Technologies (SCITEC), National Research Council (CNR), Via Alfonso Corti, 20133 Milan, Italy
5 shared publications - Benedetta Maria Squeo
Istituto di Scienze e Tecnologie Chimiche “G. Natta”, Consiglio Nazionale delle Ricerche, CNR-SCITEC, Via Corti 12, 20133 Milan, Italy
3 shared publications - Chiara Botta
Institute of Chemical Sciences and Technologies “Giulio Natta” (SCITEC) of CNR, Via Corti 12, 20133 Milano, Italy
3 shared publications Elisabetta Gavini
Department of Medicine, Surgery and Pharmacy, University of Sassari, via Muroni 23a, 07100 Sassari, Italy
2 shared publications
Latest Publications
- Open Access
Amino Acid-Derived Carbon Dots Exhibiting Chiroptical Properties: Recent Advances and Structure–Property Relationships
Amino acid-derived chiral carbon dots (c-CDs) combine the optical properties of CDs with molecular chirality, offering broad potential in sensing, catalysis, biomedicine, and photonic technologies. This review summarizes recent advances in c-CDs prepared from amino acids, focusing on how precursor structure and synthesis conditions affect chirality transfer, optical properties, particle structure, and functionality. Particular attention is given to the mechanisms of chirality generation, including direct inheritance, formation of new chiral structures, chirality inversion, and chirality loss. Structure–property relationships are also discussed, highlighting the role of amino acid functionality, particle size, and degree of carbonization in determining the resulting properties and applications. By comparing different amino acid precursors, this review identifies common trends as well as important exceptions, providing insights into the rational design of amino acid-derived chiral CDs for future applications.
Open AccessAmino Acid-Derived Carbon Dots Exhibiting Chiroptical Properties: Recent Advances and Structure–Property Relationships
Amino acid-derived chiral carbon dots (c-CDs) combine the optical properties of CDs with molecular chirality, offering broad potential in sensing, catalysis, biomedicine, and photonic technologies. This review summarizes recent advances in c-CDs prepared from amino acids, focusing on how precursor structure and synthesis conditions affect chirality transfer, optical properties, particle structure, and functionality. Particular attention is given to the mechanisms of chirality generation, including direct inheritance, formation of new chiral structures, chirality inversion, and chirality loss. Structure–property relationships are also discussed, highlighting the role of amino acid functionality, particle size, and degree of carbonization in determining the resulting properties and applications. By comparing different amino acid precursors, this review identifies common trends as well as important exceptions, providing insights into the rational design of amino acid-derived chiral CDs for future applications.
- Open Access
- 16 September 2026
- Published by MDPI AG in Pharmaceutics
- Vol. 18 (9) , 1168
Mucoadhesive Nanoemulsions for Nose-to-Brain Delivery of Dimethyl Fumarate: Development, Characterization and Proof-of-Concept In Vivo Evaluation
Background: Dimethyl fumarate (DMF) is an approved therapeutic agent for the treatment of multiple sclerosis, known for its anti-inflammatory and neuroprotective properties. However, its oral administration is often accompanied by gastrointestinal side effects, limiting its therapeutic potential. In the present study, a novel nanoemulsion (NE) formulation was developed and characterized with the aim of enhancing DMF exposure in the cerebrospinal fluid (CSF) following intranasal administration. Methods: The formulation was prepared via a self-emulsification method using geraniol (GER) as the oil phase, selected for its antioxidant properties, and chitosan oleate as a mucoadhesive stabilizer and absorption promoter. Physicochemical characterization, in vitro release, RPMI 2650 cell cytotoxicity, and permeability were evaluated. Finally, an optimized NE (1.08 ± 0.02 mg/mL DMF and 0.28 ± 0.01 mg/mL GER) was administered intranasally to adult male Sprague–Dawley rats to assess DMF and GER exposure in the CSF. Results: The NEs exhibited optimal physicochemical properties: a mean particle size of approximately 170 nm, a polydispersity index below 0.3, and a positive zeta potential (above 20 mV). Spectroscopic and thermal analyses confirmed GER and DMF compatibility and a reciprocal enhancement of stability. In vitro drug release studies revealed a fast release profile, with 81% of DMF released within 2 h, aligning with the rapid absorption expected from nasal administration. Cytotoxicity assays showed high biocompatibility (>86% viability up to 50 µM DMF), while permeability studies demonstrated significant absorption, with 60% of DMF and 90% of GER absorbed within 2–3 h, favored by smaller droplet size. In rats, intranasal delivery achieved maximum CSF concentrations of ~8 µg/mL for DMF and ~1.5 µg/mL for GER within 2 h. Conclusions: These findings provide pharmacokinetic proof-of-concept supporting further investigation of this intranasal formulation for CNS delivery of DMF.
- 16 September 2026
- Published by MDPI AG in Pharmaceutics
- Vol. 18 (9) , 1168
Open AccessMucoadhesive Nanoemulsions for Nose-to-Brain Delivery of Dimethyl Fumarate: Development, Characterization and Proof-of-Concept In Vivo Evaluation
Background: Dimethyl fumarate (DMF) is an approved therapeutic agent for the treatment of multiple sclerosis, known for its anti-inflammatory and neuroprotective properties. However, its oral administration is often accompanied by gastrointestinal side effects, limiting its therapeutic potential. In the present study, a novel nanoemulsion (NE) formulation was developed and characterized with the aim of enhancing DMF exposure in the cerebrospinal fluid (CSF) following intranasal administration. Methods: The formulation was prepared via a self-emulsification method using geraniol (GER) as the oil phase, selected for its antioxidant properties, and chitosan oleate as a mucoadhesive stabilizer and absorption promoter. Physicochemical characterization, in vitro release, RPMI 2650 cell cytotoxicity, and permeability were evaluated. Finally, an optimized NE (1.08 ± 0.02 mg/mL DMF and 0.28 ± 0.01 mg/mL GER) was administered intranasally to adult male Sprague–Dawley rats to assess DMF and GER exposure in the CSF. Results: The NEs exhibited optimal physicochemical properties: a mean particle size of approximately 170 nm, a polydispersity index below 0.3, and a positive zeta potential (above 20 mV). Spectroscopic and thermal analyses confirmed GER and DMF compatibility and a reciprocal enhancement of stability. In vitro drug release studies revealed a fast release profile, with 81% of DMF released within 2 h, aligning with the rapid absorption expected from nasal administration. Cytotoxicity assays showed high biocompatibility (>86% viability up to 50 µM DMF), while permeability studies demonstrated significant absorption, with 60% of DMF and 90% of GER absorbed within 2–3 h, favored by smaller droplet size. In rats, intranasal delivery achieved maximum CSF concentrations of ~8 µg/mL for DMF and ~1.5 µg/mL for GER within 2 h. Conclusions: These findings provide pharmacokinetic proof-of-concept supporting further investigation of this intranasal formulation for CNS delivery of DMF.
- Open Access
- 23 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (30) , 41311-41322
Controlling Both Anode and Cathode Interfacial Properties of Nanocrystal LEDs by Combining Solution-Processed Semiconducting Polymer Interlayers
Light-emitting diodes (LEDs) based on colloidal semiconductor nanocrystals represent a promising technology for next-generation electroluminescence displays. While ongoing efforts focus on optimizing nanocrystal properties, device performance also critically depends on the LED architecture, particularly the design of interfacial layers. Efficient charge injection and balanced carrier transport toward recombination layers require careful alignment of energy levels between adjacent layers. In this study, we investigate the cooperative role of different hole-transporting (HT) and electron-injecting (EI) polymers in a multilayered all-solution-processed LED structure incorporating CdSe/CdZnS nanoplatelets as deep-red emitters. Three commercially available HT polymers, differing in hole mobility and energy levels, were combined with custom-designed EI polar polymers featuring varied conjugated backbones and tailored highest occupied molecular orbital/lowest unoccupied molecular orbital (HOMO/LUMO) levels. Particular attention is given to the EI/metal interface, whose properties are tuned via phosphonate-functionalized polymer side chains. Device performance is assessed under inert and ambient conditions (without encapsulation) and correlated to the electronic properties of the interfacial layers. Notably, specific HT/EI polymer pairings substantially influence key parameters of fabricated LEDs, enabling either a reduced turn-on voltage down to 1.7 V or enhanced external quantum efficiency up to 7%, depending on the selected combination.
- 23 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (30) , 41311-41322
Open AccessControlling Both Anode and Cathode Interfacial Properties of Nanocrystal LEDs by Combining Solution-Processed Semiconducting Polymer Interlayers
Light-emitting diodes (LEDs) based on colloidal semiconductor nanocrystals represent a promising technology for next-generation electroluminescence displays. While ongoing efforts focus on optimizing nanocrystal properties, device performance also critically depends on the LED architecture, particularly the design of interfacial layers. Efficient charge injection and balanced carrier transport toward recombination layers require careful alignment of energy levels between adjacent layers. In this study, we investigate the cooperative role of different hole-transporting (HT) and electron-injecting (EI) polymers in a multilayered all-solution-processed LED structure incorporating CdSe/CdZnS nanoplatelets as deep-red emitters. Three commercially available HT polymers, differing in hole mobility and energy levels, were combined with custom-designed EI polar polymers featuring varied conjugated backbones and tailored highest occupied molecular orbital/lowest unoccupied molecular orbital (HOMO/LUMO) levels. Particular attention is given to the EI/metal interface, whose properties are tuned via phosphonate-functionalized polymer side chains. Device performance is assessed under inert and ambient conditions (without encapsulation) and correlated to the electronic properties of the interfacial layers. Notably, specific HT/EI polymer pairings substantially influence key parameters of fabricated LEDs, enabling either a reduced turn-on voltage down to 1.7 V or enhanced external quantum efficiency up to 7%, depending on the selected combination.
- Open Access
- 13 April 2026
- Published by Springer Nature in Emergent Materials
- Vol. 9 (4)
Understanding cracking dynamics across material classes: a Design of Experiments (DoE) approach
- 13 April 2026
- Published by Springer Nature in Emergent Materials
- Vol. 9 (4)
Open AccessUnderstanding cracking dynamics across material classes: a Design of Experiments (DoE) approach
- Open Access
- 22 November 2025
- Published by Elsevier in Synthetic Metals
- Vol. 317
Towards sustainable and safe-by-design energy solutions: Citric acid/perylene derived carbon dots as cathode interfacial layer in organic solar cells
- 22 November 2025
- Published by Elsevier in Synthetic Metals
- Vol. 317
Open AccessTowards sustainable and safe-by-design energy solutions: Citric acid/perylene derived carbon dots as cathode interfacial layer in organic solar cells
- Open Access
- 13 November 2025
- Published by MDPI AG in Chemistry Proceedings
- Vol. 18 (1) , 31
Chiral DPP Thin Films: Unlocking Circularly Polarized Light for Next-Gen Optoelectronics
We report the synthesis and characterization of the two enantiomeric forms of a thienyl-substituted diketopyrrolopyrrole (DPP) derivative bearing chiral alkyl chains. Thin films were prepared either by spin-coating and drop-casting and analyzed by UV–Visible absorption, electronic circular dichroism (ECD), and circularly polarized (CP) luminescence (CPL). ECD spectra confirmed the opposite chirality of the (R) and (S) isomers, while CPL measurements of the S enantiomer demonstrated solid-state chiroptical activity. Preliminary device tests showed promising optoelectronic behavior, highlighting these chiral DPP materials as potential candidates for CP organic light-emitting diodes (CP-OLEDs) applications, combining strong chiroptical response with good film quality.
- 13 November 2025
- Published by MDPI AG in Chemistry Proceedings
- Vol. 18 (1) , 31
Open AccessChiral DPP Thin Films: Unlocking Circularly Polarized Light for Next-Gen Optoelectronics
We report the synthesis and characterization of the two enantiomeric forms of a thienyl-substituted diketopyrrolopyrrole (DPP) derivative bearing chiral alkyl chains. Thin films were prepared either by spin-coating and drop-casting and analyzed by UV–Visible absorption, electronic circular dichroism (ECD), and circularly polarized (CP) luminescence (CPL). ECD spectra confirmed the opposite chirality of the (R) and (S) isomers, while CPL measurements of the S enantiomer demonstrated solid-state chiroptical activity. Preliminary device tests showed promising optoelectronic behavior, highlighting these chiral DPP materials as potential candidates for CP organic light-emitting diodes (CP-OLEDs) applications, combining strong chiroptical response with good film quality.
- Open Access
Transparent Electrodes Based on Crack-Templated Metallic Networks for Next-Generation Optoelectronics
Transparent conductive electrodes (TCEs) are essential components in modern optoelectronic devices, including organic light-emitting diodes and solar cells, sensors, and flexible displays. Indium tin oxide has been the dominant material for TCEs due to its high transparency and conductivity. However, its brittleness, high cost, and increasingly limited availability pose significant challenges for electronics. Crack-template (CT)-assisted fabrication has emerged as a promising technique to develop metal mesh-based TCEs with superior mechanical flexibility, high conductivity, and excellent optical transmittance. This technique leverages the spontaneous formation of random and continuous microcrack networks in sacrificial templates, followed by metal deposition (e.g., Cu, Ag, Al, etc.), to produce highly conductive, scalable, and low-cost electrodes. Various crack formation strategies, including controlled drying of polymer suspensions, mechanical strain engineering, and thermal processing, have been explored to tailor electrode properties. Recent studies have demonstrated that crack-templated TCEs can achieve transmittance values exceeding 85% and sheet resistances below 10 Ω/sq, with mesh line widths as low as ~40 nm. Moreover, these electrodes exhibit enhanced stretchability and robustness under mechanical deformation, outperforming ITO in bend and fatigue tests. This review aims to explore recent advancements in CT engineering, highlighting key fabrication methods, performance metrics across different metals and substrates, and presenting examples of its applications in optoelectronic devices. Additionally, it will examine current challenges and future prospects for the widespread adoption of this emerging technology.
Open AccessTransparent Electrodes Based on Crack-Templated Metallic Networks for Next-Generation Optoelectronics
Transparent conductive electrodes (TCEs) are essential components in modern optoelectronic devices, including organic light-emitting diodes and solar cells, sensors, and flexible displays. Indium tin oxide has been the dominant material for TCEs due to its high transparency and conductivity. However, its brittleness, high cost, and increasingly limited availability pose significant challenges for electronics. Crack-template (CT)-assisted fabrication has emerged as a promising technique to develop metal mesh-based TCEs with superior mechanical flexibility, high conductivity, and excellent optical transmittance. This technique leverages the spontaneous formation of random and continuous microcrack networks in sacrificial templates, followed by metal deposition (e.g., Cu, Ag, Al, etc.), to produce highly conductive, scalable, and low-cost electrodes. Various crack formation strategies, including controlled drying of polymer suspensions, mechanical strain engineering, and thermal processing, have been explored to tailor electrode properties. Recent studies have demonstrated that crack-templated TCEs can achieve transmittance values exceeding 85% and sheet resistances below 10 Ω/sq, with mesh line widths as low as ~40 nm. Moreover, these electrodes exhibit enhanced stretchability and robustness under mechanical deformation, outperforming ITO in bend and fatigue tests. This review aims to explore recent advancements in CT engineering, highlighting key fabrication methods, performance metrics across different metals and substrates, and presenting examples of its applications in optoelectronic devices. Additionally, it will examine current challenges and future prospects for the widespread adoption of this emerging technology.
- Open Access
Crack-Templated Patterns in Thin Films: Fabrication Techniques, Characterization, and Emerging Applications
Crack-templated thin films, inspired by naturally occurring patterns such as leaf venation, spider webs, and the networked structure of dried egg white, represent a paradigm shift in the design of functional materials. Traditionally, cracks in coatings are seen as defects to be avoided due to their potential to compromise mechanical integrity and performance. However, in this context, cracks are deliberately induced and meticulously controlled to serve as templates for versatile applications. This review explores the latest advances in preparation techniques, including solvent evaporation and thermal stress induction, with a focus on the interplay between material properties (e.g., polymers and ceramics) and process parameters (e.g., drying rates and temperature, layer thickness, substrate interactions) that govern crack behavior. The resulting crack patterns offer tunable features, such as density, width, shape, and orientation, which can be harnessed for applications in semitransparent electrodes, flexible sensors, and wearable and energy storage devices. Our study aims to navigate the advancements in crack engineering in the last 10 years and underscores its importance as a purposeful and versatile strategy for next-generation thin-film technologies, offering a novel and affordable approach to transforming perceived defects into assets for cutting-edge thin-film technologies.
Open AccessCrack-Templated Patterns in Thin Films: Fabrication Techniques, Characterization, and Emerging Applications
Crack-templated thin films, inspired by naturally occurring patterns such as leaf venation, spider webs, and the networked structure of dried egg white, represent a paradigm shift in the design of functional materials. Traditionally, cracks in coatings are seen as defects to be avoided due to their potential to compromise mechanical integrity and performance. However, in this context, cracks are deliberately induced and meticulously controlled to serve as templates for versatile applications. This review explores the latest advances in preparation techniques, including solvent evaporation and thermal stress induction, with a focus on the interplay between material properties (e.g., polymers and ceramics) and process parameters (e.g., drying rates and temperature, layer thickness, substrate interactions) that govern crack behavior. The resulting crack patterns offer tunable features, such as density, width, shape, and orientation, which can be harnessed for applications in semitransparent electrodes, flexible sensors, and wearable and energy storage devices. Our study aims to navigate the advancements in crack engineering in the last 10 years and underscores its importance as a purposeful and versatile strategy for next-generation thin-film technologies, offering a novel and affordable approach to transforming perceived defects into assets for cutting-edge thin-film technologies.
- Open Access
- 23 August 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 278 (Pt 4) , 134908
A thermosensitive chitosan hydrogel: An attempt for the nasal delivery of dimethyl fumarate
- 23 August 2024
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 278 (Pt 4) , 134908
Open AccessA thermosensitive chitosan hydrogel: An attempt for the nasal delivery of dimethyl fumarate
- Open Access
- 10 May 2024
- Published by Elsevier in International Journal of Pharmaceutics
- Vol. 659, 124216
Design and development of a chitosan-based nasal powder of dimethyl fumarate-cyclodextrin binary systems aimed at nose-to-brain administration. A stability study
- 10 May 2024
- Published by Elsevier in International Journal of Pharmaceutics
- Vol. 659, 124216
Open AccessDesign and development of a chitosan-based nasal powder of dimethyl fumarate-cyclodextrin binary systems aimed at nose-to-brain administration. A stability study