Mehmet Arkali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mehmet Arkali has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Muhammed Enes Atik
Department of Geomatics Engineering, Faculty of Civil Engineering, Istanbul Technical University, Istanbul 34469, Türkiye
5 shared publications - Saziye Ozge Atik
Department of Geomatics Engineering, Faculty of Civil Engineering, Istanbul Technical University, Istanbul 34469, Türkiye
2 shared publications - Bilal Mutlu
Istanbul Technical University, Civil Engineering Faculty, Department of Geomatics Engineering, 34469 Maslak Istanbul, Türkiye
1 shared publication - Burak Akpınar
Yildiz Teknik Üniversitesi
1 shared publication Esra Günaydın Dağ
1 shared publicationMahmut Oğuz
1 shared publication
Latest Publications
- Open Access
Benchmarking YOLO and Transformer-Based Detectors for Olive Tree Crown Identification in UAV Imagery
Olive groves are an important agricultural component in the Mediterranean region that offers various ecological benefits. The olive tree has tremendous cultural and economic value and is cultivated over a wide geographical range. It is essential to actively implement innovative agricultural practices to achieve efficient, sustainable olive cultivation. Automatic tree identification in olive groves is an essential tool for applications such as tree health monitoring and yield estimation. Deep learning-based approaches, which have recently gained prominence, hold significant potential for this purpose. However, the large amount of training data required by deep learning methods increases their time and effort costs. Data augmentation methods have been developed to solve this problem. In this study, olive tree detection and segmentation from unmanned aerial vehicle (UAV) images were performed using current You Only Look Once (YOLO) architectures (YOLOv8, YOLOv10, YOLOv11, YOLOv12) and transformer-based object detection algorithms (Real-Time DEtection TRansformer (RT-DETR) and Roboflow-DEtection Transformer (RF-DETR)). Two different datasets, one of which was a new dataset generated within the scope of this study, were used in this study. To investigate the effect of data augmentation on algorithm performance, both the original datasets and the augmented datasets were used. As a result of the study, 0.987 mAP was obtained with YOLOv11n, YOLOv11s, and YOLOv12s on the Olive Tree Detection (OTD) dataset, while 0.884 mAP was obtained with YOLOv8l and YOLOV8x on the Yalova dataset.
Open AccessBenchmarking YOLO and Transformer-Based Detectors for Olive Tree Crown Identification in UAV Imagery
Olive groves are an important agricultural component in the Mediterranean region that offers various ecological benefits. The olive tree has tremendous cultural and economic value and is cultivated over a wide geographical range. It is essential to actively implement innovative agricultural practices to achieve efficient, sustainable olive cultivation. Automatic tree identification in olive groves is an essential tool for applications such as tree health monitoring and yield estimation. Deep learning-based approaches, which have recently gained prominence, hold significant potential for this purpose. However, the large amount of training data required by deep learning methods increases their time and effort costs. Data augmentation methods have been developed to solve this problem. In this study, olive tree detection and segmentation from unmanned aerial vehicle (UAV) images were performed using current You Only Look Once (YOLO) architectures (YOLOv8, YOLOv10, YOLOv11, YOLOv12) and transformer-based object detection algorithms (Real-Time DEtection TRansformer (RT-DETR) and Roboflow-DEtection Transformer (RF-DETR)). Two different datasets, one of which was a new dataset generated within the scope of this study, were used in this study. To investigate the effect of data augmentation on algorithm performance, both the original datasets and the augmented datasets were used. As a result of the study, 0.987 mAP was obtained with YOLOv11n, YOLOv11s, and YOLOv12s on the Olive Tree Detection (OTD) dataset, while 0.884 mAP was obtained with YOLOv8l and YOLOV8x on the Yalova dataset.
- Open Access
- 15 January 2026
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 301-307
An Evaluation of Low-Cost GNSS-R Technique for The Precise Measurement of Water-Level Fluctuations Utilizing a Height Displacement Tool
The problem of sea-level rise, mainly caused by global warming, requires ongoing and comprehensive monitoring through various observation methods. Satellite-based and ground-based surveying techniques are commonly used to monitor sea-level changes. The Global Navigation Satellite System (GNSS) serves as a valuable tool in this context. Besides providing accurate positioning data, GNSS supports both direct and indirect monitoring of environmental conditions through signal propagation in the atmosphere, which aids in modeling ionospheric and tropospheric dynamics. Moreover, analyzing multipath data—often considered as an error source—can reveal valuable insights into the surroundings of GNSS receivers. Recently, GNSS-Reflectometry (GNSS-R) has emerged, utilizing multipath effects to gather data on the Earth’s surface’s physical properties. This study compares the GNSS-R performance of both geodetic-grade and low-cost GNSS receivers by utilizing a ComNav SinoGNSS N2 as geodetic-grade receiver and antenna and a Septentrio Mosaic-x5 low-cost receiver with ArduSimple AS-ANT2B low-cost antenna, both established near above the pond located in ITU Ayazaga Campus. In order to simulate potential variations in water-levels, including tidal fluctuations, the elevations of the antennas were systematically adjusted using a height displacement tool. Subsequently, it was investigated whether the changes in the antenna height were detected by both the geodetic receiver and the low-cost receiver, and the GNSS-R antenna height determination performance of the low-cost receiver/antenna system was revealed. As a conclusion, the discrepancies in antenna height change measurements ranged from 1.4 cm to 3.7 cm for the geodetic receiver, and from 0.7 cm to 5.0 cm for the low-cost setup. Overall, the average height difference for the geodetic-grade receiver was 2.5 cm, while the average height difference for the low-cost receiver was 3.3 cm.
- 15 January 2026
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-4/W, 301-307
Open AccessAn Evaluation of Low-Cost GNSS-R Technique for The Precise Measurement of Water-Level Fluctuations Utilizing a Height Displacement Tool
The problem of sea-level rise, mainly caused by global warming, requires ongoing and comprehensive monitoring through various observation methods. Satellite-based and ground-based surveying techniques are commonly used to monitor sea-level changes. The Global Navigation Satellite System (GNSS) serves as a valuable tool in this context. Besides providing accurate positioning data, GNSS supports both direct and indirect monitoring of environmental conditions through signal propagation in the atmosphere, which aids in modeling ionospheric and tropospheric dynamics. Moreover, analyzing multipath data—often considered as an error source—can reveal valuable insights into the surroundings of GNSS receivers. Recently, GNSS-Reflectometry (GNSS-R) has emerged, utilizing multipath effects to gather data on the Earth’s surface’s physical properties. This study compares the GNSS-R performance of both geodetic-grade and low-cost GNSS receivers by utilizing a ComNav SinoGNSS N2 as geodetic-grade receiver and antenna and a Septentrio Mosaic-x5 low-cost receiver with ArduSimple AS-ANT2B low-cost antenna, both established near above the pond located in ITU Ayazaga Campus. In order to simulate potential variations in water-levels, including tidal fluctuations, the elevations of the antennas were systematically adjusted using a height displacement tool. Subsequently, it was investigated whether the changes in the antenna height were detected by both the geodetic receiver and the low-cost receiver, and the GNSS-R antenna height determination performance of the low-cost receiver/antenna system was revealed. As a conclusion, the discrepancies in antenna height change measurements ranged from 1.4 cm to 3.7 cm for the geodetic receiver, and from 0.7 cm to 5.0 cm for the low-cost setup. Overall, the average height difference for the geodetic-grade receiver was 2.5 cm, while the average height difference for the low-cost receiver was 3.3 cm.
- Open Access
- 12 November 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-5/W, 17-22
Comparative Analysis of Machine Learning Algorithms for Classification of UAV-based Photogrammetric Cultural Heritage Point Clouds
Unmanned Aerial Vehicles (UAVs) are being increasingly utilized across different fields because of their ability to deliver quick, cost-effective, and precise spatial information. Innovations in photogrammetry and computer vision techniques, especially Structure from Motion (SfM) and Multi-View Stereo (MVS), have improved the generation of orthoimages, digital surface models, and dense point clouds, rendering UAVs highly efficient for documentation and three-dimensional reconstruction. In studies focused on cultural heritage, UAV-based photogrammetry has emerged as a crucial resource for accurately preserving and representing historical sites with great detail and resolution. In this context, the current study analyzes UAV-acquired point cloud data from the Temple of Hera in Italy and performs a comparative assessment of three machine learning algorithms, Support Vector Machines (SVM), Random Forest (RF), and Extreme Gradient Boosting (XGBoost), for the purpose of semantic segmentation tasks. According to our results, the XGBoost and Random Forests (RF) methods has reached to more than 90% F1 score for all classes, and the SVM method has reached 90% F1 score only for three classes.
- 12 November 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-5/W, 17-22
Open AccessComparative Analysis of Machine Learning Algorithms for Classification of UAV-based Photogrammetric Cultural Heritage Point Clouds
Unmanned Aerial Vehicles (UAVs) are being increasingly utilized across different fields because of their ability to deliver quick, cost-effective, and precise spatial information. Innovations in photogrammetry and computer vision techniques, especially Structure from Motion (SfM) and Multi-View Stereo (MVS), have improved the generation of orthoimages, digital surface models, and dense point clouds, rendering UAVs highly efficient for documentation and three-dimensional reconstruction. In studies focused on cultural heritage, UAV-based photogrammetry has emerged as a crucial resource for accurately preserving and representing historical sites with great detail and resolution. In this context, the current study analyzes UAV-acquired point cloud data from the Temple of Hera in Italy and performs a comparative assessment of three machine learning algorithms, Support Vector Machines (SVM), Random Forest (RF), and Extreme Gradient Boosting (XGBoost), for the purpose of semantic segmentation tasks. According to our results, the XGBoost and Random Forests (RF) methods has reached to more than 90% F1 score for all classes, and the SVM method has reached 90% F1 score only for three classes.
- Open Access
- 19 May 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-M-6, 45-52
Machine Learning-Based Supervised Classification of Sentinel-2 MSI and Landsat-8 OLI Imagery in Marguerite Bay of Antarctic Peninsula
Especially in the last decade, many innovative advantages of machine learning algorithms have been known, and their use in places where the effects of climate change are closely monitored, such as the polar regions, has introduced revolutionary scientific breakthroughs. In this study, machine learning methods were used to classify Sentinel-2A and Landsat-8 OLI satellite images of Marguerite Bay of Antarctic Peninsula. Four supervised classification algorithms were applied for pixel-based and object-based classification. Random Forest (RF), Decision Tree (DT), Support Vector Machines (SVM), k-nearest neighbor (kNN) are the algorithms selected for object-based image analysis (OBIA). SVM, RF, Light Gradient Boosting Machine (LightGBM) and Extreme Gradient Boosting (XGBoost) were used for pixel-based classification. Each image is labelled into three classes: glacier, water and soil. The classification methods were analysed comparatively for each data set. In both Sentinel-2 and Landsat-8 images, 97.31% and 96.28% overall accuracy were achieved with SVM, respectively.
- 19 May 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-M-6, 45-52
Open AccessMachine Learning-Based Supervised Classification of Sentinel-2 MSI and Landsat-8 OLI Imagery in Marguerite Bay of Antarctic Peninsula
Especially in the last decade, many innovative advantages of machine learning algorithms have been known, and their use in places where the effects of climate change are closely monitored, such as the polar regions, has introduced revolutionary scientific breakthroughs. In this study, machine learning methods were used to classify Sentinel-2A and Landsat-8 OLI satellite images of Marguerite Bay of Antarctic Peninsula. Four supervised classification algorithms were applied for pixel-based and object-based classification. Random Forest (RF), Decision Tree (DT), Support Vector Machines (SVM), k-nearest neighbor (kNN) are the algorithms selected for object-based image analysis (OBIA). SVM, RF, Light Gradient Boosting Machine (LightGBM) and Extreme Gradient Boosting (XGBoost) were used for pixel-based classification. Each image is labelled into three classes: glacier, water and soil. The classification methods were analysed comparatively for each data set. In both Sentinel-2 and Landsat-8 images, 97.31% and 96.28% overall accuracy were achieved with SVM, respectively.
- Open Access
- 19 May 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-M-6, 325-330
Accuracy Assessment of RTK, PPK, and PPP-AR Techniques for Direct Georeferencing in UAV-Based Photogrammetric Mapping
In the fields of mapping, surveying, and three-dimensional (3D) modeling, unmanned aerial vehicle (UAV) systems have become essential equipment in recent times. UAVs are increasingly widely used, especially in the field of photogrammetry. The integration of technologies such as digital cameras, inertial measurement unit (IMU), and Global Navigation Satellite System (GNSS) has improved the quality and accuracy of photogrammetric products. In comparison to conventional methodologies, UAVs present a cost-effective alternative to traditional aerial photogrammetry. Recent advancements in technology substantiate their efficacy across a variety of applications. The utilization of direct georeferencing minimizes the reliance on ground control points (GCP). With the advancements in positioning techniques, the accuracy of the products is concurrently improving. Real-Time Kinematic (RTK) and Post-Processed Kinematic (PPK) techniques play a critical role in enhancing the accuracy of UAV-based photogrammetry. Both techniques are widely used in UAV-based photogrammetry. However, relative positioning poses limitations to the study in terms of infrastructure and cost. PPP (Precise Point Positioning), a specific form of absolute positioning, is utilized effectively across various applications. The PPP method, used globally with a single GNSS receiver, is more cost-effective than relative methods. In this study, the performance of the PPP-AR technique as an alternative to the relative methods RTK and PPK is evaluated. Thus, the applicability of the PPP technique, which has improved accuracy and precision with ambiguity resolution, in UAV-based photogrammetry is examined. RTK and PPK techniques achieve Root Mean Square Error (RMSE) values of less than 10 centimeters. In contrast, RMSE values at the decimeter level are observed in the PPP-AR technique.
- 19 May 2025
- Published by Copernicus GmbH in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
- Vol. XLVIII-M-6, 325-330
Open AccessAccuracy Assessment of RTK, PPK, and PPP-AR Techniques for Direct Georeferencing in UAV-Based Photogrammetric Mapping
In the fields of mapping, surveying, and three-dimensional (3D) modeling, unmanned aerial vehicle (UAV) systems have become essential equipment in recent times. UAVs are increasingly widely used, especially in the field of photogrammetry. The integration of technologies such as digital cameras, inertial measurement unit (IMU), and Global Navigation Satellite System (GNSS) has improved the quality and accuracy of photogrammetric products. In comparison to conventional methodologies, UAVs present a cost-effective alternative to traditional aerial photogrammetry. Recent advancements in technology substantiate their efficacy across a variety of applications. The utilization of direct georeferencing minimizes the reliance on ground control points (GCP). With the advancements in positioning techniques, the accuracy of the products is concurrently improving. Real-Time Kinematic (RTK) and Post-Processed Kinematic (PPK) techniques play a critical role in enhancing the accuracy of UAV-based photogrammetry. Both techniques are widely used in UAV-based photogrammetry. However, relative positioning poses limitations to the study in terms of infrastructure and cost. PPP (Precise Point Positioning), a specific form of absolute positioning, is utilized effectively across various applications. The PPP method, used globally with a single GNSS receiver, is more cost-effective than relative methods. In this study, the performance of the PPP-AR technique as an alternative to the relative methods RTK and PPK is evaluated. Thus, the applicability of the PPP technique, which has improved accuracy and precision with ambiguity resolution, in UAV-based photogrammetry is examined. RTK and PPK techniques achieve Root Mean Square Error (RMSE) values of less than 10 centimeters. In contrast, RMSE values at the decimeter level are observed in the PPP-AR technique.
- Open Access
Impact of UAV-Derived RTK/PPK Products on Geometric Correction of VHR Satellite Imagery
Satellite imagery is a widely used source of spatial information in many applications, such as land use/land cover, object detection, agricultural monitoring, and urban area monitoring. Numerous factors, including projection, tilt angle, scanner, atmospheric conditions, terrain curvature, and fluctuations, can cause satellite images to become distorted. Eliminating systematic errors caused by the sensor and platform is a crucial step to obtaining reliable information from satellite images. To utilize satellite images directly in applications requiring high accuracy, the errors in the images should be removed by geometric correction. In this study, geometric correction was applied to the Pléiades 1A (PHR) image using non-parametric methods, and the effects of different transformation models and digital elevation models (DEMs) were investigated. Ground control points (GCPs) were obtained from orthophotos created by the photogrammetric method using precise positioning. The effect of photogrammetric DEMs with various spatial resolutions on geometric correction was investigated. Additionally, the effect of DEMs obtained using the photogrammetric method was compared with those from open-source DEMs, including SRTM, ASTER GDEM, COP30, AW3D30, and NASADEM. Two-dimensional polynomial transformation, the thin plate spline (TPS), and the rational function model (RFM) were applied as transformation methods. Our results showed that a higher-accuracy geometric correction process could be achieved with orthophotos and DEMs created using precise positioning techniques such as RTK and PPK. According to the results obtained, an RMSE of 0.633 m was achieved with RFM using RTK-DEM, while an RMSE of 0.615 m was achieved with RFM using PPK-DEM.
Open AccessImpact of UAV-Derived RTK/PPK Products on Geometric Correction of VHR Satellite Imagery
Satellite imagery is a widely used source of spatial information in many applications, such as land use/land cover, object detection, agricultural monitoring, and urban area monitoring. Numerous factors, including projection, tilt angle, scanner, atmospheric conditions, terrain curvature, and fluctuations, can cause satellite images to become distorted. Eliminating systematic errors caused by the sensor and platform is a crucial step to obtaining reliable information from satellite images. To utilize satellite images directly in applications requiring high accuracy, the errors in the images should be removed by geometric correction. In this study, geometric correction was applied to the Pléiades 1A (PHR) image using non-parametric methods, and the effects of different transformation models and digital elevation models (DEMs) were investigated. Ground control points (GCPs) were obtained from orthophotos created by the photogrammetric method using precise positioning. The effect of photogrammetric DEMs with various spatial resolutions on geometric correction was investigated. Additionally, the effect of DEMs obtained using the photogrammetric method was compared with those from open-source DEMs, including SRTM, ASTER GDEM, COP30, AW3D30, and NASADEM. Two-dimensional polynomial transformation, the thin plate spline (TPS), and the rational function model (RFM) were applied as transformation methods. Our results showed that a higher-accuracy geometric correction process could be achieved with orthophotos and DEMs created using precise positioning techniques such as RTK and PPK. According to the results obtained, an RMSE of 0.633 m was achieved with RFM using RTK-DEM, while an RMSE of 0.615 m was achieved with RFM using PPK-DEM.
- Open Access
Comparative Assessment of the Effect of Positioning Techniques and Ground Control Point Distribution Models on the Accuracy of UAV-Based Photogrammetric Production
Unmanned aerial vehicle (UAV) systems have recently become essential for mapping, surveying, and three-dimensional (3D) modeling applications. These systems are capable of providing highly accurate products through integrated advanced technologies, including a digital camera, inertial measurement unit (IMU), and Global Navigation Satellite System (GNSS). UAVs are a cost-effective alternative to traditional aerial photogrammetry, and recent advancements demonstrate their effectiveness in many applications. In UAV-based photogrammetry, ground control points (GCPs) are utilized for georeferencing to enhance positioning precision. The distribution, number, and location of GCPs in the study area play a crucial role in determining the accuracy of photogrammetric products. This research evaluates the accuracy of positioning techniques for image acquisition for photogrammetric production and the effect of GCP distribution models. The camera position was determined using real-time kinematic (RTK), post-processed kinematic (PPK), and precise point positioning-ambiguity resolution (PPP-AR) techniques. In the criteria for determining the GCPs, six models were established within the İstanbul Technical University, Ayazaga Campus. To assess the accuracy of the points in these models, the horizontal, vertical, and 3D root mean square error (RMSE) values were calculated, holding the test points stationary in place. In the study, 2.5 cm horizontal RMSE and 3.0 cm vertical RMSE were obtained with the model containing five homogeneous GCPs by the indirect georeferencing method. The highest RMSE values of all three components in RTK, PPK, and PPP-AR methods were obtained without GCPs. For all six models, all techniques have an error value of sub-decimeter. The PPP-AR technique yields error values that are comparable to those of the other techniques. The PPP-AR appears to be an alternative to RTK and PPK, which usually require infrastructure, labor, and higher costs.
Open AccessComparative Assessment of the Effect of Positioning Techniques and Ground Control Point Distribution Models on the Accuracy of UAV-Based Photogrammetric Production
Unmanned aerial vehicle (UAV) systems have recently become essential for mapping, surveying, and three-dimensional (3D) modeling applications. These systems are capable of providing highly accurate products through integrated advanced technologies, including a digital camera, inertial measurement unit (IMU), and Global Navigation Satellite System (GNSS). UAVs are a cost-effective alternative to traditional aerial photogrammetry, and recent advancements demonstrate their effectiveness in many applications. In UAV-based photogrammetry, ground control points (GCPs) are utilized for georeferencing to enhance positioning precision. The distribution, number, and location of GCPs in the study area play a crucial role in determining the accuracy of photogrammetric products. This research evaluates the accuracy of positioning techniques for image acquisition for photogrammetric production and the effect of GCP distribution models. The camera position was determined using real-time kinematic (RTK), post-processed kinematic (PPK), and precise point positioning-ambiguity resolution (PPP-AR) techniques. In the criteria for determining the GCPs, six models were established within the İstanbul Technical University, Ayazaga Campus. To assess the accuracy of the points in these models, the horizontal, vertical, and 3D root mean square error (RMSE) values were calculated, holding the test points stationary in place. In the study, 2.5 cm horizontal RMSE and 3.0 cm vertical RMSE were obtained with the model containing five homogeneous GCPs by the indirect georeferencing method. The highest RMSE values of all three components in RTK, PPK, and PPP-AR methods were obtained without GCPs. For all six models, all techniques have an error value of sub-decimeter. The PPP-AR technique yields error values that are comparable to those of the other techniques. The PPP-AR appears to be an alternative to RTK and PPK, which usually require infrastructure, labor, and higher costs.