Ahammed Suhail Odungat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ahammed Suhail Odungat has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Doris Segets
Institute for Energy and Materials Processes – Particle Science and Technology (EMPI‐PST) University of Duisburg‐Essen Duisburg Germany
5 shared publications Lars Grebener
3 shared publications- Lars Grebener
Institute for Energy and Materials Processes – Particle Science and Technology (EMPI‐PST) University of Duisburg‐Essen Duisburg Germany
3 shared publications - Mena-Alexander Kräenbring
Institute for Energy and Materials Processes – Particle Science and Technology (EMPI‐PST) University of Duisburg‐Essen Carl‐Benz‐Straße 199 47057 Duisburg Germany
3 shared publications Adarsh Jain
Institute for Energy and Materials Processes – Particle Science and Technology (EMPI‐PST) University of Duisburg‐Essen Duisburg Germany
2 shared publications- Anna Katharina Mechler
Electrochemical Reaction Engineering (AVT.ERT) RWTH Aachen University Aachen Germany
2 shared publications
Latest Publications
- Open Access
- 27 July 2026
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 7 (7)
Thickness‐Dependent Plasma Activation in Binder‐Free Multilayer Ni–Co–O Anodes for Alkaline Oxygen Evolution
Binder‐free Ni–Co–O anodes were fabricated by ultrasonic spraycoating multilayer catalyst films directly onto Ni substrates, followed by nitrogen plasma treatment to enhance performance in alkaline water electrolysis. By systematically varying coating thickness, we were able to elucidate the relationship between plasma‐induced surface reconstruction and electrode architecture. Plasma exposure, with an effective modification depth of ∼1 µm, promoted near‐surface Co enrichment and improved wettability while preserving the bulk crystal structure, as confirmed by X‐ray photoelectron spectroscopy, energy‐dispersive X‐ray spectroscopy, and grazing‐incidence X‐ray diffraction. Despite this only partial activation of thicker coatings, their enhanced porosity and microscale roughness facilitated superior electrolyte penetration and gas release, leading to higher catalytic efficiency. Consequently, the thickest plasma‐treated electrode exhibits an overpotential of 335 mV at 100 mA cm −2 in 1 M KOH, outperforming the Ni substrate reference (380 mV), while maintaining robust mechanical integrity without delamination. These findings demonstrate that catalytic performance depends on the interplay between finite plasma activation depth and multilayer thickness, highlighting the need to tailor coating thickness to balance surface modification with effective electrolyte penetration and gas transport. Nitrogen plasma treatment thus provides a scalable strategy for engineering mechanically robust and efficient binder‐free Ni–Co–O anodes for alkaline oxygen evolution reaction.
- 27 July 2026
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 7 (7)
Open AccessThickness‐Dependent Plasma Activation in Binder‐Free Multilayer Ni–Co–O Anodes for Alkaline Oxygen Evolution
Binder‐free Ni–Co–O anodes were fabricated by ultrasonic spraycoating multilayer catalyst films directly onto Ni substrates, followed by nitrogen plasma treatment to enhance performance in alkaline water electrolysis. By systematically varying coating thickness, we were able to elucidate the relationship between plasma‐induced surface reconstruction and electrode architecture. Plasma exposure, with an effective modification depth of ∼1 µm, promoted near‐surface Co enrichment and improved wettability while preserving the bulk crystal structure, as confirmed by X‐ray photoelectron spectroscopy, energy‐dispersive X‐ray spectroscopy, and grazing‐incidence X‐ray diffraction. Despite this only partial activation of thicker coatings, their enhanced porosity and microscale roughness facilitated superior electrolyte penetration and gas release, leading to higher catalytic efficiency. Consequently, the thickest plasma‐treated electrode exhibits an overpotential of 335 mV at 100 mA cm −2 in 1 M KOH, outperforming the Ni substrate reference (380 mV), while maintaining robust mechanical integrity without delamination. These findings demonstrate that catalytic performance depends on the interplay between finite plasma activation depth and multilayer thickness, highlighting the need to tailor coating thickness to balance surface modification with effective electrolyte penetration and gas transport. Nitrogen plasma treatment thus provides a scalable strategy for engineering mechanically robust and efficient binder‐free Ni–Co–O anodes for alkaline oxygen evolution reaction.
- Open Access
- 9 March 2026
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 5 (4) , 434-447
Electrochemical impedance spectroscopy-based screening of membrane effects via gas diffusion electrode half-cells for PEMFC performance optimization
EIS combined with DRT in a GDE half-cell decouples membrane-induced resistance contributions.
- 9 March 2026
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 5 (4) , 434-447
Open AccessElectrochemical impedance spectroscopy-based screening of membrane effects via gas diffusion electrode half-cells for PEMFC performance optimization
EIS combined with DRT in a GDE half-cell decouples membrane-induced resistance contributions.
- Open Access
- 22 January 2026
- Published by Open Engineering Inc in engrXiv
From half-cells to full-cells: across-scale comparative evaluation of lanthanum-based perovskites as high-performance anode materials for the oxygen evolution reaction
The widespread reliance on evaluating electrocatalysts in electrochemical half-cells presents limitations that hinder a faster transition from academia to industry and can lead to premature exclusion of promising materials. To address these challenges, it is crucial to implement materials testing in application-relevant setups such as zero-gap full-cells. This transition can be achieved through implementing coherent workflows combining rapid evaluation of as-synthesized materials, electrode evaluation at different scales, and post-mortem analysis. This work presents a comparative study of three spray-flame synthesized lanthanum-based perovskite materials (LaMnO3, LaFeO3, and LaCoO3) for the oxygen evolution reaction under alkaline conditions, highlighting different behavior across scales. The research demonstrates how the interplay of materials properties and electrode engineering affects performance under mild and harsh electrochemical conditions. At every step, these perovskites challenge existing literature through unforeseen behavior. Under application-relevant conditions, the results suggest that LaFeO₃ (2.09 V) and LaMnO₃ (2.16 V), with comparable performance, could potentially replace LaCoO₃ (2.07 V). Furthermore, advanced post-mortem techniques provide deeper insight into catalytic activity and structural changes, which cannot be fully explained without preliminary electrochemical half-cell testing. By linking fundamental studies to application-relevant testing, this research provides knowledge and methods for accelerated material and electrode development.
- 22 January 2026
- Published by Open Engineering Inc in engrXiv
Open AccessFrom half-cells to full-cells: across-scale comparative evaluation of lanthanum-based perovskites as high-performance anode materials for the oxygen evolution reaction
The widespread reliance on evaluating electrocatalysts in electrochemical half-cells presents limitations that hinder a faster transition from academia to industry and can lead to premature exclusion of promising materials. To address these challenges, it is crucial to implement materials testing in application-relevant setups such as zero-gap full-cells. This transition can be achieved through implementing coherent workflows combining rapid evaluation of as-synthesized materials, electrode evaluation at different scales, and post-mortem analysis. This work presents a comparative study of three spray-flame synthesized lanthanum-based perovskite materials (LaMnO3, LaFeO3, and LaCoO3) for the oxygen evolution reaction under alkaline conditions, highlighting different behavior across scales. The research demonstrates how the interplay of materials properties and electrode engineering affects performance under mild and harsh electrochemical conditions. At every step, these perovskites challenge existing literature through unforeseen behavior. Under application-relevant conditions, the results suggest that LaFeO₃ (2.09 V) and LaMnO₃ (2.16 V), with comparable performance, could potentially replace LaCoO₃ (2.07 V). Furthermore, advanced post-mortem techniques provide deeper insight into catalytic activity and structural changes, which cannot be fully explained without preliminary electrochemical half-cell testing. By linking fundamental studies to application-relevant testing, this research provides knowledge and methods for accelerated material and electrode development.
- Open Access
- 4 June 2025
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 6 (11)
A Multiscale Pore Analysis Method for Polymer Electrolyte Membrane Fuel Cell Catalyst Layers Validated and Exemplified by Correlating Microstructure with Production Process Parameters
This study introduces a comprehensive multiscale framework for analyzing and optimizing the microstructural properties of catalyst‐coated membranes (CCMs) in polymer electrolyte membrane fuel cells. The approach integrates mercury intrusion porosimetry, multiple microscopy techniques, and nondestructive focused ion beam scanning electron microscopy (FIB‐SEM), enabling detailed characterization across microstructural scales, from tens of nanometers to hundreds of micrometers. A custom MATLAB‐based image‐processing algorithm is developed to extract pore attributes—including size, porosity, and geometry—from FIB‐SEM cross‐sections, providing unprecedented insights into microstructural variations under varying fabrication conditions. This multiscale strategy enables robust analysis of catalyst layer features, from micrometer‐scale defects to nanoscale secondary pores. By employing this approach, the study reveals significant correlations between process parameters (such as hot‐pressing) and dispersion formulations with the resulting microstructural properties and electrochemical performance. Previously hidden dependencies were uncovered, demonstrating that catalyst layers produced from different dispersions exhibit distinct responses to hot‐pressing. For instance, the catalyst layers produced from dispersions containing higher alcohol and ionomer contents appear more susceptible to microstructural change under compression. This scalable, cost‐effective approach lays the foundation for rational, data‐driven design of CCMs and related electrochemical systems.
- 4 June 2025
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 6 (11)
Open AccessA Multiscale Pore Analysis Method for Polymer Electrolyte Membrane Fuel Cell Catalyst Layers Validated and Exemplified by Correlating Microstructure with Production Process Parameters
This study introduces a comprehensive multiscale framework for analyzing and optimizing the microstructural properties of catalyst‐coated membranes (CCMs) in polymer electrolyte membrane fuel cells. The approach integrates mercury intrusion porosimetry, multiple microscopy techniques, and nondestructive focused ion beam scanning electron microscopy (FIB‐SEM), enabling detailed characterization across microstructural scales, from tens of nanometers to hundreds of micrometers. A custom MATLAB‐based image‐processing algorithm is developed to extract pore attributes—including size, porosity, and geometry—from FIB‐SEM cross‐sections, providing unprecedented insights into microstructural variations under varying fabrication conditions. This multiscale strategy enables robust analysis of catalyst layer features, from micrometer‐scale defects to nanoscale secondary pores. By employing this approach, the study reveals significant correlations between process parameters (such as hot‐pressing) and dispersion formulations with the resulting microstructural properties and electrochemical performance. Previously hidden dependencies were uncovered, demonstrating that catalyst layers produced from different dispersions exhibit distinct responses to hot‐pressing. For instance, the catalyst layers produced from dispersions containing higher alcohol and ionomer contents appear more susceptible to microstructural change under compression. This scalable, cost‐effective approach lays the foundation for rational, data‐driven design of CCMs and related electrochemical systems.
- Open Access
- 14 April 2025
- Published by Wiley in Small Methods
- Vol. 9 (7) , e2402079
Thermal Imaging for Quality Control in Thin Silicon‐Based Coatings for Lithium‐Ion Batteries: Defect Detection, Drying Dynamics, and Machine Learning‐Based Mass Loading Estimation
This study demonstrates thermal imaging as a non‐destructive, real‐time quality‐control‐method for detecting coating defects, analyzing mass loading, and understanding drying dynamics in silicon‐based thin coatings. Thermal imaging identifies critical defects such as streaks, pinholes, and chatter marks through distinct thermal signatures, with streaks reducing surface temperature by up to 15 °C. It establishes strong correlations between surface temperature, mass loading, and coating thickness: for instance, a 100 µm wet film thickness shows a surface temperature of ≈50 °C, corresponding to a mass loading of 2.4 mg cm⁻2. Drying dynamics reveal that thicker coatings retain more solvent, prolong drying, and shrink significantly, with 100 µm wet‐gap coatings shrinking by up to 60%. A Random Forest machine learning model predicts mass loading with high accuracy (±0.3 mg cm⁻2) using surface temperature data, highlighting the feasibility of thermal imaging‐based quality estimation. While validated in a batch process, this approach is well‐suited for integration into roll‐to‐roll production across diverse thin coating applications, such as batteries, solar cells, and functional films. Thermal imaging provides a robust pathway for real‐time defect detection, drying optimization, and quality control, improving coating performance and production reliability.
- 14 April 2025
- Published by Wiley in Small Methods
- Vol. 9 (7) , e2402079
Open AccessThermal Imaging for Quality Control in Thin Silicon‐Based Coatings for Lithium‐Ion Batteries: Defect Detection, Drying Dynamics, and Machine Learning‐Based Mass Loading Estimation
This study demonstrates thermal imaging as a non‐destructive, real‐time quality‐control‐method for detecting coating defects, analyzing mass loading, and understanding drying dynamics in silicon‐based thin coatings. Thermal imaging identifies critical defects such as streaks, pinholes, and chatter marks through distinct thermal signatures, with streaks reducing surface temperature by up to 15 °C. It establishes strong correlations between surface temperature, mass loading, and coating thickness: for instance, a 100 µm wet film thickness shows a surface temperature of ≈50 °C, corresponding to a mass loading of 2.4 mg cm⁻2. Drying dynamics reveal that thicker coatings retain more solvent, prolong drying, and shrink significantly, with 100 µm wet‐gap coatings shrinking by up to 60%. A Random Forest machine learning model predicts mass loading with high accuracy (±0.3 mg cm⁻2) using surface temperature data, highlighting the feasibility of thermal imaging‐based quality estimation. While validated in a batch process, this approach is well‐suited for integration into roll‐to‐roll production across diverse thin coating applications, such as batteries, solar cells, and functional films. Thermal imaging provides a robust pathway for real‐time defect detection, drying optimization, and quality control, improving coating performance and production reliability.
- Open Access
- 9 January 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (19)
A Proof‐of‐Principle Demonstration: Exploring the Effect of Anode Layer Microstructure on the Alkaline Oxygen Evolution Reaction
This study explores the effect of nickel cobalt oxide (Ni‐Co‐O) anode layer microstructure on the oxygen evolution reaction (OER). Four anodes with similar Ni‐Co‐O loadings and chemical characteristics but distinct morphologies are fabricated by ultrasonic spraying catalyst inks of varying solvent composition (pure water versus a water‐ethanol mixture) and drying temperatures (50 and 150 °C) on nickel (Ni) plates. Upon varying solvent composition, particles in the water‐based ink exhibited lower stability than particles in the water‐ethanol‐based ink, boosting the particle connectivity in the layers. This particle connectivity correlated with the mechanical strength of the layers, resulting in reduced contact resistance and enhanced activity. The second observation is that at 50 °C, the surface morphology exhibited hill‐like islands with higher roughness, while at 150 °C, concave hemispherical shapes with lower roughness are observed. From 2D‐distribution data, it is found that surface roughness correlated with the wettability with electrolyte. Roughness increased the lyophobicity and enhanced the activity through more accessible active sites and efficient bubble transport. This work highlights how microstructure affects macroscopic layer properties, and how these in turn can enhance or diminish the performance of the OER compared to bare Ni, offering insights into the knowledge‐based design of anode layers.
- 9 January 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (19)
Open AccessA Proof‐of‐Principle Demonstration: Exploring the Effect of Anode Layer Microstructure on the Alkaline Oxygen Evolution Reaction
This study explores the effect of nickel cobalt oxide (Ni‐Co‐O) anode layer microstructure on the oxygen evolution reaction (OER). Four anodes with similar Ni‐Co‐O loadings and chemical characteristics but distinct morphologies are fabricated by ultrasonic spraying catalyst inks of varying solvent composition (pure water versus a water‐ethanol mixture) and drying temperatures (50 and 150 °C) on nickel (Ni) plates. Upon varying solvent composition, particles in the water‐based ink exhibited lower stability than particles in the water‐ethanol‐based ink, boosting the particle connectivity in the layers. This particle connectivity correlated with the mechanical strength of the layers, resulting in reduced contact resistance and enhanced activity. The second observation is that at 50 °C, the surface morphology exhibited hill‐like islands with higher roughness, while at 150 °C, concave hemispherical shapes with lower roughness are observed. From 2D‐distribution data, it is found that surface roughness correlated with the wettability with electrolyte. Roughness increased the lyophobicity and enhanced the activity through more accessible active sites and efficient bubble transport. This work highlights how microstructure affects macroscopic layer properties, and how these in turn can enhance or diminish the performance of the OER compared to bare Ni, offering insights into the knowledge‐based design of anode layers.
- Open Access
- 30 January 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (6)
A Procedure for Rational Probe Liquids Selection to Determine Hansen Solubility Parameters
Hansen Solubility Parameters (HSP), viewed in the context of similarity whenever dispersion is focused, offer valuable insights into the surface characteristics of nanoparticles. However, existing methods for determining HSP via the sedimentation of nanoparticles require multiple probe liquids, resulting in time‐consuming, costly experiments with potential health risks. To address this, we developed a two‐step strategy that enables a systematic selection of liquids. The key element of the approach is to first identify the rough location of the Hansen sphere in the three‐dimensional Hansen space using a well‐chosen set of probe liquids of different polarities and chemical structures. Then, depending on the outcome of the first step, a particular choice of liquids is made for the final HSP determination. Taken together, the introduced procedure reduces the amount of required liquids for experiments from currently more than ten to a maximum of seven chosen based on a well‐defined, coherent methodology. Validation was performed on carbon black, non‐pigmentary nano‐scale titania, silicon/carbon composites, and lanthanum cobaltite particles, i. e., relevant materials that are commonly utilized in fuel cells, batteries, cyclohexene oxidation, catalytic combustion, photocatalysis, and heterogeneous Fenton reactions. The study showcases the potential to save time, costs, and efficiently determine HSP values in a comparable manner.
- 30 January 2024
- Published by Wiley in ChemCatChem
- Vol. 16 (6)
Open AccessA Procedure for Rational Probe Liquids Selection to Determine Hansen Solubility Parameters
Hansen Solubility Parameters (HSP), viewed in the context of similarity whenever dispersion is focused, offer valuable insights into the surface characteristics of nanoparticles. However, existing methods for determining HSP via the sedimentation of nanoparticles require multiple probe liquids, resulting in time‐consuming, costly experiments with potential health risks. To address this, we developed a two‐step strategy that enables a systematic selection of liquids. The key element of the approach is to first identify the rough location of the Hansen sphere in the three‐dimensional Hansen space using a well‐chosen set of probe liquids of different polarities and chemical structures. Then, depending on the outcome of the first step, a particular choice of liquids is made for the final HSP determination. Taken together, the introduced procedure reduces the amount of required liquids for experiments from currently more than ten to a maximum of seven chosen based on a well‐defined, coherent methodology. Validation was performed on carbon black, non‐pigmentary nano‐scale titania, silicon/carbon composites, and lanthanum cobaltite particles, i. e., relevant materials that are commonly utilized in fuel cells, batteries, cyclohexene oxidation, catalytic combustion, photocatalysis, and heterogeneous Fenton reactions. The study showcases the potential to save time, costs, and efficiently determine HSP values in a comparable manner.