Mohammed Alabdali
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohammed Alabdali has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Alejandro A. Franco
UMR CNRS, Université de Picardie Jules Verne, 15, rue Baudelocque, Amiens Cedex, France, 80039
7 shared publications - Franco Martín Zanotto
Laboratoire de Réactivité et Chimie des Solides (LRCS)
3 shared publications - Vincent Seznec
Laboratoire de Réactivité et Chimie des Solides (LRCS) Université de Picardie Jules Verne, Hub de l'Energie, UMR CNRS 7314 15 rue Baudelocque 80039 Amiens France
3 shared publications Alejandro Franco
Laboratoire de Réactivité et Chimie des Solides (LRCS)
2 shared publicationsBenoît Notredame
Umicore 31 rue Marais 1000 Brussels 8 Belgium
2 shared publications- Francisco Fernandez
Laboratoire de Réactivité et de Chimie des Solides, UMR CNRS 7314, Université de Picardie Jules Verne Amiens France
2 shared publications
Latest Publications
- Open Access
- 7 October 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (10)
Accelerated Parameter Optimization of Granular Models of Battery Manufacturing
Mesoscale particle simulations play a crucial role in investigating the manufacturing processes of electrochemical energy devices. They enable physical insights into the processes while building datasets to train AI surrogates for electrode microstructure and manufacturing optimization. Hence, the automation of parameter optimization for mesoscale simulations remains imperative. Optimization algorithms that do not require prior knowledge or experience simulating a specific chemistry/system are the ideal solution. One such optimizer is the particle swarm optimizer (PSO). However, in the classical serial implementation, the evaluation time varies across different parameter sets. This means the optimizer has to wait for all simulations to finish at each iteration, which can lead to unnecessary use of computational resources. This study presents an optimization framework that implements asynchronous PSO (APSO), enabling more efficient resource use to find the global optimum, i.e., parameter values that yield model outputs that agree with experiments. The effect of different APSO configurations on convergence was tested. The framework was then used to find the optimal parameters for two different mesoscale discrete element method simulations. The data acquired from the automated search were then analyzed to study the models’ behavior within the chosen parameter search space.
- 7 October 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (10)
Open AccessAccelerated Parameter Optimization of Granular Models of Battery Manufacturing
Mesoscale particle simulations play a crucial role in investigating the manufacturing processes of electrochemical energy devices. They enable physical insights into the processes while building datasets to train AI surrogates for electrode microstructure and manufacturing optimization. Hence, the automation of parameter optimization for mesoscale simulations remains imperative. Optimization algorithms that do not require prior knowledge or experience simulating a specific chemistry/system are the ideal solution. One such optimizer is the particle swarm optimizer (PSO). However, in the classical serial implementation, the evaluation time varies across different parameter sets. This means the optimizer has to wait for all simulations to finish at each iteration, which can lead to unnecessary use of computational resources. This study presents an optimization framework that implements asynchronous PSO (APSO), enabling more efficient resource use to find the global optimum, i.e., parameter values that yield model outputs that agree with experiments. The effect of different APSO configurations on convergence was tested. The framework was then used to find the optimal parameters for two different mesoscale discrete element method simulations. The data acquired from the automated search were then analyzed to study the models’ behavior within the chosen parameter search space.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (4) , 565
Dual Scale Modelling Framework to Predict the Influence of Drying Conditions on the Microstructural Properties in Li-Ion Batteries
The performance of lithium-ion battery (LIB) electrodes is significantly influenced by manufacturing parameters, particularly during the slurry drying stage. Slurry drying is one of the key steps which involves high energy consumption and implies high cost in the battery production. It often triggers the undesirable migration of carbon additives and binder throughout the electrode thickness. This migration results in reduced mechanical adhesion, increased internal resistance and a significant decline in long-cycle life. Modelling in this case is a necessary tool in predicting the impact of drying conditions on the electrode properties [1,2].
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (4) , 565
Dual Scale Modelling Framework to Predict the Influence of Drying Conditions on the Microstructural Properties in Li-Ion Batteries
The performance of lithium-ion battery (LIB) electrodes is significantly influenced by manufacturing parameters, particularly during the slurry drying stage. Slurry drying is one of the key steps which involves high energy consumption and implies high cost in the battery production. It often triggers the undesirable migration of carbon additives and binder throughout the electrode thickness. This migration results in reduced mechanical adhesion, increased internal resistance and a significant decline in long-cycle life. Modelling in this case is a necessary tool in predicting the impact of drying conditions on the electrode properties [1,2].
- Open Access
- 10 June 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 688
Influence of slurry drying machinery conditions on lithium-ion battery cathode microstructural properties: Multiscale modelling insights
- 10 June 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 688
Open AccessInfluence of slurry drying machinery conditions on lithium-ion battery cathode microstructural properties: Multiscale modelling insights
- Open Access
- 14 November 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 662
Coarse-grained physics-based modelling for tape casting of fuel-electrode supports in Solid Oxide Cells
- 14 November 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 662
Open AccessCoarse-grained physics-based modelling for tape casting of fuel-electrode supports in Solid Oxide Cells
- Open Access
- 18 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Coarse-Grained Physics-based Modelling for Tape Casting of Fuel-Electrode Supports in Solid Oxide Cells
Optimising the tape casting process for fabricating NiO/YSZ cermet-based fuel-electrode supports in Solid Oxide Cells remains a resource-intensive challenge. Improving the green tape properties is often reliant on trial-and-error procedures or proprietary knowledge that is inaccessible to the broader scientific community. In this work, we use computational simulations as a powerful tool to link the manufacturing process to the final microstructure of the tape. A novel three-dimensional physics-based model is presented to simulate the slip preparation and the homogeneous drying process of the tape casting, producing the fuel electrode support in Solid Oxide Cells. Our model is well-calibrated to experimental data, and we investigate the dried microstructure of the simulated support.
- 18 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCoarse-Grained Physics-based Modelling for Tape Casting of Fuel-Electrode Supports in Solid Oxide Cells
Optimising the tape casting process for fabricating NiO/YSZ cermet-based fuel-electrode supports in Solid Oxide Cells remains a resource-intensive challenge. Improving the green tape properties is often reliant on trial-and-error procedures or proprietary knowledge that is inaccessible to the broader scientific community. In this work, we use computational simulations as a powerful tool to link the manufacturing process to the final microstructure of the tape. A novel three-dimensional physics-based model is presented to simulate the slip preparation and the homogeneous drying process of the tape casting, producing the fuel electrode support in Solid Oxide Cells. Our model is well-calibrated to experimental data, and we investigate the dried microstructure of the simulated support.
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (3) , 438
Simulation of Solid State Battery Electrodes from Manufacturing to Electrochemical Performance
All-solid-state lithium batteries (ASSBs) have the potential to deliver higher energy and power densities compared to conventional lithium-ion batteries with liquid electrolytes. Due to the use of solid electrolytes, a uniform distribution and close contact between the active material (AM) and solid electrolyte (SE) particles are essential for a proper electrochemical behavior of the electrodes. Thus, understanding the correlation between the microstructure of composite electrodes, charge transport, and cell performance is critical. We present, in this work, a comprehensive computational modeling workflow that examines the influence of the degree of calendering on the final performance of slurry-based composite electrodes. This study uses NMC622/Li₆PS₅Cl-based cathode microstructures with the presence of carbon and binder, generated through conventional calendering, via manufacturing process simulations. This computational workflow is able to correlate the manufacturing process, the composite cathode microstructure and the cell performance, as it combines Coarse-Grained Molecular Dynamics (CGMD) for the manufacturing simulation of the slurry, drying and calendaring [1] with a 4D-resolved performance model describing electrochemistry and transport mechanisms (cf. Figure 1). The three-dimensional spatial locations of AM, SE, and Carbon-Binder Domain (CBD) within the electrode, as predicted from CGMD simulations, are considered explicitly as separated phases, each of them with specific physical properties. Our computational modeling workflow, allowing to perform simulations from the solvent-based manufacturing process to the electrochemical performance of the resulting ASSBs cathodes, permits the study of the impact of the calendering on ionic flux bottlenecks, the heterogeneities of electrochemical reactivity within the electrode volume, and the resulting overall electrochemical performance. These features make our modeling approach a powerful tool to provide guidance for optimized manufacturing of the ASSBs cathodes with wet-processing methods [2]. Figure 1. Schematic of our computational workflow simulating the wet manufacturing process of ASSB composite cathodes: from slurry to calendered electrode followed by the half-cell electrochemical performance simulation. References: Alabdali, M.; Zanotto, F.M.; Duquesnoy, M.; Hatz, A.-K.; Ma, D.; Auvergniot, J.; Viallet, V.; Seznec, V.; Franco, A.A. Three-Dimensional Physical Modeling of the Wet Manufacturing Process of Solid-State Battery Electrodes. Journal of Power Sources 2023, 580, 233427, doi:10.1016/j.jpowsour.2023.233427. Ben Hadj Ali, S.; Alabdali, M.; Viallet, V.; Seznec, V.; Franco, A.A. A Computational Workflow for the Simulation of Solid State Battery Electrodes from Manufacturing to Electrochemical Performance, Journal of Power Sources, 2024 (Under review). Figure 1
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (3) , 438
Simulation of Solid State Battery Electrodes from Manufacturing to Electrochemical Performance
All-solid-state lithium batteries (ASSBs) have the potential to deliver higher energy and power densities compared to conventional lithium-ion batteries with liquid electrolytes. Due to the use of solid electrolytes, a uniform distribution and close contact between the active material (AM) and solid electrolyte (SE) particles are essential for a proper electrochemical behavior of the electrodes. Thus, understanding the correlation between the microstructure of composite electrodes, charge transport, and cell performance is critical. We present, in this work, a comprehensive computational modeling workflow that examines the influence of the degree of calendering on the final performance of slurry-based composite electrodes. This study uses NMC622/Li₆PS₅Cl-based cathode microstructures with the presence of carbon and binder, generated through conventional calendering, via manufacturing process simulations. This computational workflow is able to correlate the manufacturing process, the composite cathode microstructure and the cell performance, as it combines Coarse-Grained Molecular Dynamics (CGMD) for the manufacturing simulation of the slurry, drying and calendaring [1] with a 4D-resolved performance model describing electrochemistry and transport mechanisms (cf. Figure 1). The three-dimensional spatial locations of AM, SE, and Carbon-Binder Domain (CBD) within the electrode, as predicted from CGMD simulations, are considered explicitly as separated phases, each of them with specific physical properties. Our computational modeling workflow, allowing to perform simulations from the solvent-based manufacturing process to the electrochemical performance of the resulting ASSBs cathodes, permits the study of the impact of the calendering on ionic flux bottlenecks, the heterogeneities of electrochemical reactivity within the electrode volume, and the resulting overall electrochemical performance. These features make our modeling approach a powerful tool to provide guidance for optimized manufacturing of the ASSBs cathodes with wet-processing methods [2]. Figure 1. Schematic of our computational workflow simulating the wet manufacturing process of ASSB composite cathodes: from slurry to calendered electrode followed by the half-cell electrochemical performance simulation. References: Alabdali, M.; Zanotto, F.M.; Duquesnoy, M.; Hatz, A.-K.; Ma, D.; Auvergniot, J.; Viallet, V.; Seznec, V.; Franco, A.A. Three-Dimensional Physical Modeling of the Wet Manufacturing Process of Solid-State Battery Electrodes. Journal of Power Sources 2023, 580, 233427, doi:10.1016/j.jpowsour.2023.233427. Ben Hadj Ali, S.; Alabdali, M.; Viallet, V.; Seznec, V.; Franco, A.A. A Computational Workflow for the Simulation of Solid State Battery Electrodes from Manufacturing to Electrochemical Performance, Journal of Power Sources, 2024 (Under review). Figure 1
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (27) , 1523
A Hybrid Modelling Approach Coupling Physics-Based Simulation and Deep Learning for Battery Electrode Manufacturing Simulations
The growing demand for Lithium-ion Batteries necessitates innovative strategies to accelerate the optimization of electrode manufacturing processes. The conventional solvent-based manufacturing process for optimal electrodes requires the fine-tuning of several interconnected process and respective parameters. Currently, this optimization heavily relies on trial-and-error methods, resulting in high emissions, energy consumptions, scrap rates, and resource usage. To comprehend these intricate relationships and simplify the optimization process, prior research has employed empirical and computational methods. However, these approaches are resource-intensive, requiring substantial materials or computational power. In this work, we present a novel supervised Deep Learning (DL)-based workflow (Figure 1) that integrates seamlessly with physics-based cathode manufacturing simulation frameworks reported in our earlier studies 1 , 2. This workflow significantly reduces the computational cost of modelling synthetic electrode microstructures and demonstrates adaptability to various electrode materials. The trained DL model, termed Slurry-NN, is trained to work within the physics-based simulation framework, accurately predicting slurry microstructures, including their density, based on different slurry formulations such as solid content and viscosity as a function of shear rate. Our Slurry-NN model is capable of predicting 3D spatial resolution microstructures for Nickel Manganese Cobalt Oxide (in the ratio of 1:1:1), Lithium Iron Phosphate, and All-Solid-State Battery based cathode slurry microstructure, achieving a 50 % reduction in computational time. Furthermore, the predicted slurry microstructure informs a physics-based simulation pipeline for drying and calendering, enabling accurate modelling of calendered electrodes. This pipeline accounts for particle spatial arrangements and key electrode performance metrics, such as porosity. The proposed hybrid modelling approach, combining the Slurry-NN and physics-based simulations, offers a promising pathway to streamline lab-scale electrode manufacturing. With further fine-tuning, it has potential to enable more efficient and sustainable battery production by reducing errors, waste, and resources consumption3. References [1] M. Duquesnoy, C. Liu, D. Z. Dominguez, V. Kumar, E. Ayerbe, and A. A. Franco, “Machine learning-assisted multi-objective optimization of battery manufacturing from synthetic data generated by physics-based simulations,” Energy Storage Materials, vol. 56, pp. 50–61, Feb. 2023, doi: 10.1016/j.ensm.2022.12.040. [2] C. Liu, T. Lombardo, J. Xu, A. C. Ngandjong, and A. A. Franco, “An experimentally-validated 3D electrochemical model revealing electrode manufacturing parameters’ effects on battery performance,” Energy Storage Materials, vol. 54, pp. 156–163, Jan. 2023, doi: 10.1016/j.ensm.2022.10.035. [3] U. Vijay, D.E. Galvez-Aranda, F.M. Zanotto, T. L. Dinh, M. Alabdali, M. Asch, and A. A. Franco, “A Hybrid Modelling Approach Coupling Physics-based Simulation and Deep Learning for Battery Electrode Manufacturing Simulations,” Energy Storage Materials, p. 103883, Nov. 2024, doi: 10.1016/j.ensm.2024.103883. Figure 1
- 11 July 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-01 (27) , 1523
A Hybrid Modelling Approach Coupling Physics-Based Simulation and Deep Learning for Battery Electrode Manufacturing Simulations
The growing demand for Lithium-ion Batteries necessitates innovative strategies to accelerate the optimization of electrode manufacturing processes. The conventional solvent-based manufacturing process for optimal electrodes requires the fine-tuning of several interconnected process and respective parameters. Currently, this optimization heavily relies on trial-and-error methods, resulting in high emissions, energy consumptions, scrap rates, and resource usage. To comprehend these intricate relationships and simplify the optimization process, prior research has employed empirical and computational methods. However, these approaches are resource-intensive, requiring substantial materials or computational power. In this work, we present a novel supervised Deep Learning (DL)-based workflow (Figure 1) that integrates seamlessly with physics-based cathode manufacturing simulation frameworks reported in our earlier studies 1 , 2. This workflow significantly reduces the computational cost of modelling synthetic electrode microstructures and demonstrates adaptability to various electrode materials. The trained DL model, termed Slurry-NN, is trained to work within the physics-based simulation framework, accurately predicting slurry microstructures, including their density, based on different slurry formulations such as solid content and viscosity as a function of shear rate. Our Slurry-NN model is capable of predicting 3D spatial resolution microstructures for Nickel Manganese Cobalt Oxide (in the ratio of 1:1:1), Lithium Iron Phosphate, and All-Solid-State Battery based cathode slurry microstructure, achieving a 50 % reduction in computational time. Furthermore, the predicted slurry microstructure informs a physics-based simulation pipeline for drying and calendering, enabling accurate modelling of calendered electrodes. This pipeline accounts for particle spatial arrangements and key electrode performance metrics, such as porosity. The proposed hybrid modelling approach, combining the Slurry-NN and physics-based simulations, offers a promising pathway to streamline lab-scale electrode manufacturing. With further fine-tuning, it has potential to enable more efficient and sustainable battery production by reducing errors, waste, and resources consumption3. References [1] M. Duquesnoy, C. Liu, D. Z. Dominguez, V. Kumar, E. Ayerbe, and A. A. Franco, “Machine learning-assisted multi-objective optimization of battery manufacturing from synthetic data generated by physics-based simulations,” Energy Storage Materials, vol. 56, pp. 50–61, Feb. 2023, doi: 10.1016/j.ensm.2022.12.040. [2] C. Liu, T. Lombardo, J. Xu, A. C. Ngandjong, and A. A. Franco, “An experimentally-validated 3D electrochemical model revealing electrode manufacturing parameters’ effects on battery performance,” Energy Storage Materials, vol. 54, pp. 156–163, Jan. 2023, doi: 10.1016/j.ensm.2022.10.035. [3] U. Vijay, D.E. Galvez-Aranda, F.M. Zanotto, T. L. Dinh, M. Alabdali, M. Asch, and A. A. Franco, “A Hybrid Modelling Approach Coupling Physics-based Simulation and Deep Learning for Battery Electrode Manufacturing Simulations,” Energy Storage Materials, p. 103883, Nov. 2024, doi: 10.1016/j.ensm.2024.103883. Figure 1
- Open Access
- 26 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
A New Three-Dimensional Microstructure-Resolved Model to Assess Mechanical Stress in Solid State Battery Electrodes
In all-solid-state batteries (ASSBs), the mechanical stress generated during electrode (de)lithiation plays a critical role in determining the cell longevity because of the induced degradation mechanisms. This stress originates from local volume fluctuations in the active electrode materials, which are intrinsically coupled to spatial variations in lithium-ion concentration during electrochemical cycling. The local volume change of certain active materials, such as nickel-rich LiNixMnyCozO2, significantly varies with the lithium content, which should be considered in the stress calculations in the ASSB modeling studies. In this work, we present a novel ASSB model that considers electrochemistry and solid mechanics in a one way coupled manner. The model spatially resolves the three-dimensional microstructure of an ASSB half-cell generated from wet manufacturing process simulations and is based on linear continuum mechanics. The coupling of electrochemistry and solid mechanics is incorporated via lithiation-dependent volumetric changes of the active materials and the microstructural changes due to deformed geometries affecting the particles percolation paths. Furthermore, we show that the overall volume change of the half-cell is dependent on the C-rate and on the applied stack pressure. Finally, our findings demonstrate that solid-mechanical effects and their interplay with electrochemical phenomena significantly impact the evolution of interfacial surface area and the total pore volume. These factors are crucial for ensuring accurate computational predictions, underscoring the necessity of incorporating such interactions in battery modeling approaches.
- 26 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessA New Three-Dimensional Microstructure-Resolved Model to Assess Mechanical Stress in Solid State Battery Electrodes
In all-solid-state batteries (ASSBs), the mechanical stress generated during electrode (de)lithiation plays a critical role in determining the cell longevity because of the induced degradation mechanisms. This stress originates from local volume fluctuations in the active electrode materials, which are intrinsically coupled to spatial variations in lithium-ion concentration during electrochemical cycling. The local volume change of certain active materials, such as nickel-rich LiNixMnyCozO2, significantly varies with the lithium content, which should be considered in the stress calculations in the ASSB modeling studies. In this work, we present a novel ASSB model that considers electrochemistry and solid mechanics in a one way coupled manner. The model spatially resolves the three-dimensional microstructure of an ASSB half-cell generated from wet manufacturing process simulations and is based on linear continuum mechanics. The coupling of electrochemistry and solid mechanics is incorporated via lithiation-dependent volumetric changes of the active materials and the microstructural changes due to deformed geometries affecting the particles percolation paths. Furthermore, we show that the overall volume change of the half-cell is dependent on the C-rate and on the applied stack pressure. Finally, our findings demonstrate that solid-mechanical effects and their interplay with electrochemical phenomena significantly impact the evolution of interfacial surface area and the total pore volume. These factors are crucial for ensuring accurate computational predictions, underscoring the necessity of incorporating such interactions in battery modeling approaches.
- 23 December 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (2)
Experimental and Computational Analysis of Slurry‐Based Manufacturing of Solid‐State Battery Composite Cathode
The rheological properties of the slurry significantly influence the manufacturing process of solid‐state battery cathode electrodes, affecting coating quality and the resulting cathode microstructure. The correlation between slurry attributes and final electrode characteristics is analyzed using particle size and solid content as key metrics. We perform coarse‐grained molecular dynamics simulations of LiNi0.8Mn0.1Co0.1O2 and Li6PS5Cl composite electrodes, with simulated slurries closely fitting experimental viscosities, indicating the model's suitability for predicting slurry behavior. Then the microstructural properties of the dried and calendered electrodes are calibrated with in house experimental data. The simulation workflow is fitted completely using only two sets of force fields, one for the slurry and the other one for the dried state of the electrode. The effective electronic conductivities are contingent on the particle size, without showing significant limitation on cathode power capabilities. This comprehensive study highlights the intricate interplay between slurry solid content, microstructure design, and manufacturing processes in optimizing solid‐state battery cell performance. Consistent slurry characteristics are crucial for uniform electrode coating while optimizing particle size and solid content improves electrode porosity. These findings provide valuable insights for enhancing solid‐state battery electrode design and slurry‐based manufacturing processes for the adaptation of already established scaling up technologies.
- 23 December 2024
- Published by Wiley in Batteries & Supercaps
- Vol. 8 (2)
Experimental and Computational Analysis of Slurry‐Based Manufacturing of Solid‐State Battery Composite Cathode
The rheological properties of the slurry significantly influence the manufacturing process of solid‐state battery cathode electrodes, affecting coating quality and the resulting cathode microstructure. The correlation between slurry attributes and final electrode characteristics is analyzed using particle size and solid content as key metrics. We perform coarse‐grained molecular dynamics simulations of LiNi0.8Mn0.1Co0.1O2 and Li6PS5Cl composite electrodes, with simulated slurries closely fitting experimental viscosities, indicating the model's suitability for predicting slurry behavior. Then the microstructural properties of the dried and calendered electrodes are calibrated with in house experimental data. The simulation workflow is fitted completely using only two sets of force fields, one for the slurry and the other one for the dried state of the electrode. The effective electronic conductivities are contingent on the particle size, without showing significant limitation on cathode power capabilities. This comprehensive study highlights the intricate interplay between slurry solid content, microstructure design, and manufacturing processes in optimizing solid‐state battery cell performance. Consistent slurry characteristics are crucial for uniform electrode coating while optimizing particle size and solid content improves electrode porosity. These findings provide valuable insights for enhancing solid‐state battery electrode design and slurry‐based manufacturing processes for the adaptation of already established scaling up technologies.