Abid Paripurna Fuadi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abid Paripurna Fuadi has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Ade Kurniawan
Research Center for Energy Conversion and Conservation - National Research and Innovation Agency, KST. B.J Habibie Serpong, South Tangerang, Banten 15314, Indonesia
1 shared publication - Aditya Rio Prabowo
Universitas Sebelas Maret
1 shared publication - Agus Suprianto
Research Center for Aviation Technology, National Research and Innovation Agency (BRIN) , Bogor , 16350 , Indonesia
1 shared publication - Andi Cahyo Prasetyo Tri Nugroho
Research Center for Hydrodynamics Technology, National Research and Innovation Agency (BRIN) , South Tangerang , 15314 , Indonesia
1 shared publication - Bagus Anang Nugroho
Research Center for Transportation Technology, National Research and Innovation Agency (BRIN), South Tangerang, Banten, Indonesia
1 shared publication - Buddin Al Hakim
Research Center for Hydrodynamics Technology, National Research and Innovation Agency (BRIN) , South Tangerang , 15314 , Indonesia
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Walter de Gruyter GmbH in Curved and Layered Structures
- Vol. 13 (1)
Structural assessment of segmental joints of wind turbine tower subjected to combined loads using finite element simulation
The wind turbine tower is an important component of the system that collects wind energy. The tower is built as a series of tapered pipes with decreasing thickness upward, which makes the joint connections play a significant role in the global structural integrity of the tower. A tower failure may trigger a global failure, as it might be followed by the rotor’s collapse, resulting in significant losses in maintenance expenditure. This study investigates the collapse behavior of the wind turbine tower with and without a bolt joint. The tower response was analyzed using the Finite Element Method (FEM) implemented in ABAQUS. Initially, a benchmarking analysis was conducted to verify the simulation procedures. After verification, numerical simulations were performed for the selected case configurations to evaluate the tower’s behavior under combined axial compression, shear force, and bending moment. Numerical simulation results show that the torsional loading of Loading Case 2 (LC2) significantly reduces the Load Proportionality Factor (LPF), with Loading Case 1 (LC1) having an LPF of 2.89 and LC2 having an LPF of 1.39, resulting in a weakening effect of torque on stability. Meanwhile, Material Nonlinear Analysis (MNA) and Geometric and Material Nonlinear Analysis (GMNA), which account for material plasticity and geometric nonlinearity, provide more realistic predictions with LPFs of 1.89 and 1.24 for LC1 and 1.95 and 1.29 for LC2. In addition, bolt pretension improved stress redistribution and structural stability, resulting in a more uniform load transfer within the jointed system. Therefore, these results contribute to the design and optimization of tower structures, emphasizing the importance of considering both material and geometric nonlinearities, as well as bolt pretension, in structural analysis.
- 1 January 2026
- Published by Walter de Gruyter GmbH in Curved and Layered Structures
- Vol. 13 (1)
Open AccessStructural assessment of segmental joints of wind turbine tower subjected to combined loads using finite element simulation
The wind turbine tower is an important component of the system that collects wind energy. The tower is built as a series of tapered pipes with decreasing thickness upward, which makes the joint connections play a significant role in the global structural integrity of the tower. A tower failure may trigger a global failure, as it might be followed by the rotor’s collapse, resulting in significant losses in maintenance expenditure. This study investigates the collapse behavior of the wind turbine tower with and without a bolt joint. The tower response was analyzed using the Finite Element Method (FEM) implemented in ABAQUS. Initially, a benchmarking analysis was conducted to verify the simulation procedures. After verification, numerical simulations were performed for the selected case configurations to evaluate the tower’s behavior under combined axial compression, shear force, and bending moment. Numerical simulation results show that the torsional loading of Loading Case 2 (LC2) significantly reduces the Load Proportionality Factor (LPF), with Loading Case 1 (LC1) having an LPF of 2.89 and LC2 having an LPF of 1.39, resulting in a weakening effect of torque on stability. Meanwhile, Material Nonlinear Analysis (MNA) and Geometric and Material Nonlinear Analysis (GMNA), which account for material plasticity and geometric nonlinearity, provide more realistic predictions with LPFs of 1.89 and 1.24 for LC1 and 1.95 and 1.29 for LC2. In addition, bolt pretension improved stress redistribution and structural stability, resulting in a more uniform load transfer within the jointed system. Therefore, these results contribute to the design and optimization of tower structures, emphasizing the importance of considering both material and geometric nonlinearities, as well as bolt pretension, in structural analysis.
- Open Access
- 21 November 2024
- Published by Universitas Muhammadiyah Magelang in Automotive Experiences
- Vol. 7 (3) , 525-537
Prediction of Performance and Emission of Gasoline Engine Fueled with a Gasoline-Ethanol-Methanol Mixture Using One Dimensional Engine Modelling Based on Engine Test Results
The depletion of petroleum reserves as the basic raw material for gasoline production has driven studies into alternative fuels. One of the alternative fuels is alcohol, both ethanol and methanol. Due to their liquid form and physical-chemical properties similar to gasoline, small modifications to the engine are required. This paper will explain the effect of using a mixture of gasoline (in this case, RON 98 gasoline with methanol or methanol on engine performance and emissions. The fuel mixtures are as follows: G100, E10, E20, E30, M10, M20, M30. AVL Boost simulation software was used as a tool for 1-dimensional engine modelling, where the modeling is based on engine testing with G100 fuel. The results show that with increasing ethanol-methanol composition, torque and power decrease, and SFC increases. On the emission side, CO, CO2, and HC were decreased and NOx increased.
- 21 November 2024
- Published by Universitas Muhammadiyah Magelang in Automotive Experiences
- Vol. 7 (3) , 525-537
Open AccessPrediction of Performance and Emission of Gasoline Engine Fueled with a Gasoline-Ethanol-Methanol Mixture Using One Dimensional Engine Modelling Based on Engine Test Results
The depletion of petroleum reserves as the basic raw material for gasoline production has driven studies into alternative fuels. One of the alternative fuels is alcohol, both ethanol and methanol. Due to their liquid form and physical-chemical properties similar to gasoline, small modifications to the engine are required. This paper will explain the effect of using a mixture of gasoline (in this case, RON 98 gasoline with methanol or methanol on engine performance and emissions. The fuel mixtures are as follows: G100, E10, E20, E30, M10, M20, M30. AVL Boost simulation software was used as a tool for 1-dimensional engine modelling, where the modeling is based on engine testing with G100 fuel. The results show that with increasing ethanol-methanol composition, torque and power decrease, and SFC increases. On the emission side, CO, CO2, and HC were decreased and NOx increased.