Yangyang Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yangyang Yang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Degang Ren
Yellow River Delta Intelligent Agricultural Machinery Equipment Industry Research Institute, Qingdao 257300, China
2 shared publications - Dongwei Wang
College of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao 266109, China
2 shared publications - Xueliang Chang
College of Electrical and Mechanical Engineering, Qingdao Agricultural University, Qingdao 266109, China
2 shared publications - Zenghui Gao
College of Mechanical & Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China
2 shared publications - Bing Liu
College of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao 266109, China, China
1 shared publication - Bing Liu
College of Mechanical and Electrical Engineering, Qingdao Agricultural University, Qingdao 266109, China
1 shared publication
Latest Publications
- Open Access
- 27 January 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (3) , 276
Study on the Design and Performance of a Seed Discharger for Peanut Plot Breeding Based on the CFD-DEM Method
In order to facilitate the peanut plot breeding process, a seed discharger for peanut plot breeding was designed and optimised. Two single stroke cylinders were used for seed replacement and to avoid confusion between different varieties of seeds. The working performance of the seed discharger was simulated by the CFD-DEM method. The simulation results showed that the seed suction hole could adsorb the seeds stably, the adsorption force at the seed suction hole was about 0.02 N, and the seed-clearing time was 0.31 s. When the rotation speed of the seed discharge cylinder was 25 r/min, the diameter of the seed suction hole was 6 mm and the working negative pressure was −5.5 kPa. The developed seed discharger was installed on the test bench to carry out the central composite design experiment, and the test results were analysed and optimised by Design-Expert software. The final parameters of the seed discharger were obtained as follows: rotational speed of the seed cylinder is 25 r/min, the diameter of the seed suction hole is 6 mm, and the working negative pressure is −6 kPa. This indicates that the design of the initial parameters is reasonable. Finally, the seed discharger was tested in the field. The results shown that the 95% confidence intervals for seeding pass rate, multiple-seed rate, and seed missing rate were (88.9557%, 93.1777%), (3.8137%, 6.4597%), and (2.1157%, 5.4777%), respectively, which met the requirements of peanut plot seeding.
- 27 January 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (3) , 276
Open AccessStudy on the Design and Performance of a Seed Discharger for Peanut Plot Breeding Based on the CFD-DEM Method
In order to facilitate the peanut plot breeding process, a seed discharger for peanut plot breeding was designed and optimised. Two single stroke cylinders were used for seed replacement and to avoid confusion between different varieties of seeds. The working performance of the seed discharger was simulated by the CFD-DEM method. The simulation results showed that the seed suction hole could adsorb the seeds stably, the adsorption force at the seed suction hole was about 0.02 N, and the seed-clearing time was 0.31 s. When the rotation speed of the seed discharge cylinder was 25 r/min, the diameter of the seed suction hole was 6 mm and the working negative pressure was −5.5 kPa. The developed seed discharger was installed on the test bench to carry out the central composite design experiment, and the test results were analysed and optimised by Design-Expert software. The final parameters of the seed discharger were obtained as follows: rotational speed of the seed cylinder is 25 r/min, the diameter of the seed suction hole is 6 mm, and the working negative pressure is −6 kPa. This indicates that the design of the initial parameters is reasonable. Finally, the seed discharger was tested in the field. The results shown that the 95% confidence intervals for seeding pass rate, multiple-seed rate, and seed missing rate were (88.9557%, 93.1777%), (3.8137%, 6.4597%), and (2.1157%, 5.4777%), respectively, which met the requirements of peanut plot seeding.
- Open Access
- 3 January 2025
- Published by MDPI AG in Preprints.org
Study on the Design and Performance of Seed Discharger for Peanut Plot Breeding Based on CFD-DEM Method
A seed discharger for peanut plot breeding was designed and its seed supply, seed carrying, seed discharge and seed clearing processes were analysed. Two single stroke cylinders were used for seed replacement and to avoid confusion between different varieties of seeds. The working performance of the seed discharger was simulated by CFD-DEM mothed. The simulation results showed that the seed section hole could adsorb the seeds stably, the adsorption force at the seed suction hole was about 0.02N, and the seed clearing time was 0.31s, when the rotation speed of the seed discharge cylinder was set to be 25r/min, the diameter of the seed suction hole was set to be 6mm, and the working negative pressure was set to be 5.5kPa. The developed seed discharger was installed on the test bench to carry out the central composite design experiment, and the test results were analysed and optimized by Design-Expert software. The optimal parameters of the seed discharger were obtained as follows: rotational speed of the seed cylinder is 24.38 r/min, the diameter of the seed suction hole is 5.73 mm, and the working negative pressure is -6.15 kPa. Finally, the seed discharger was tested in the field, and the result shown that the seed spacing pass rate was more than 90%, the multiple seeds rate was less than 6%, the seed missing rate was less than 4.5%, and the seed clearing rate was always 100%, which met the requirements of peanut plot seeding.
- 3 January 2025
- Published by MDPI AG in Preprints.org
Open AccessStudy on the Design and Performance of Seed Discharger for Peanut Plot Breeding Based on CFD-DEM Method
A seed discharger for peanut plot breeding was designed and its seed supply, seed carrying, seed discharge and seed clearing processes were analysed. Two single stroke cylinders were used for seed replacement and to avoid confusion between different varieties of seeds. The working performance of the seed discharger was simulated by CFD-DEM mothed. The simulation results showed that the seed section hole could adsorb the seeds stably, the adsorption force at the seed suction hole was about 0.02N, and the seed clearing time was 0.31s, when the rotation speed of the seed discharge cylinder was set to be 25r/min, the diameter of the seed suction hole was set to be 6mm, and the working negative pressure was set to be 5.5kPa. The developed seed discharger was installed on the test bench to carry out the central composite design experiment, and the test results were analysed and optimized by Design-Expert software. The optimal parameters of the seed discharger were obtained as follows: rotational speed of the seed cylinder is 24.38 r/min, the diameter of the seed suction hole is 5.73 mm, and the working negative pressure is -6.15 kPa. Finally, the seed discharger was tested in the field, and the result shown that the seed spacing pass rate was more than 90%, the multiple seeds rate was less than 6%, the seed missing rate was less than 4.5%, and the seed clearing rate was always 100%, which met the requirements of peanut plot seeding.