Alireza Eikani
Research Subjects
Alireza Eikani has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Mojtaba Mirsalim
Amirkabir University of Technology,Electrical Machines and Transformers Research Laboratory,Department of Electrical Engineering,Tehran,Iran
6 shared publicationsBehnam M. Mosammam
Amirkabir University of Technology (Tehran Polytechnic),Department of Electrical Engineering,Tehran,Iran
2 shared publicationsEhsan Farmahini Farahani
School of Engineering, Newcastle University,Electrical Power Research Group,Newcastle upon Tyne,U.K
2 shared publicationsMohammad Amirkhani
Amirkabir University of Technology,Electrical Machines and Transformers Research Laboratory,Department of Electrical Engineering,Tehran,Iran
2 shared publicationsAmir Khorsandi
Amirkabir University of Technology (Tehran Polytechnic),Department of Electrical Engineering,Tehran,Iran
1 shared publicationDavood Arab Khaburi
Iran University of Science and Technology,Department of Electrical Engineering,Tehran,Iran
1 shared publication
Latest Publications
- 14 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Hybrid-Excited, Variable-Flux, and Inter-Modular Biased-Flux Motors: A Comparative Analysis
This paper analyses three prominent biased-flux permanent magnet (BFPM) motors and compares them with each other. The structures of these BFPMs are different from each other, but they share the same operation principle. These structures are, namely, hybrid-excited multi-tooth slot-PM (HETSPM), multi-tooth variable flux reluctance (TVFR), and inter-modular PM (IMPM). The reason for this selection of structure is because of complementary features that each one possesses. For example, the HETSPM motor places in between the TVFR and IMPM motors in terms of PM consumption and demagnetization. However, the IMPM structure produces high amount torque at high efficiency. The demagnetization of the HETSPM and IMPM structures is also investigated and is shown that, in the similar situation, the HETSPM provides a safer operation environment for the PMs. Two-dimensional finite element method is used to extract the important profiles of the mentioned structures.
- 14 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Hybrid-Excited, Variable-Flux, and Inter-Modular Biased-Flux Motors: A Comparative Analysis
This paper analyses three prominent biased-flux permanent magnet (BFPM) motors and compares them with each other. The structures of these BFPMs are different from each other, but they share the same operation principle. These structures are, namely, hybrid-excited multi-tooth slot-PM (HETSPM), multi-tooth variable flux reluctance (TVFR), and inter-modular PM (IMPM). The reason for this selection of structure is because of complementary features that each one possesses. For example, the HETSPM motor places in between the TVFR and IMPM motors in terms of PM consumption and demagnetization. However, the IMPM structure produces high amount torque at high efficiency. The demagnetization of the HETSPM and IMPM structures is also investigated and is shown that, in the similar situation, the HETSPM provides a safer operation environment for the PMs. Two-dimensional finite element method is used to extract the important profiles of the mentioned structures.
- 20 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Robust Wireless Power Transfer by Self-Oscillating Controlled Inverter and Circular Pads
Inductive wireless power transfer (WPT) faces significant challenges in achieving high efficiency and stable output power for charging mobile devices like EVs. Using circular pads (CP) as the transmitter (Tx) and receiver (Rx) and a self-oscillating controlled inverter, this paper demonstrates a robust WPT system that maintains high constant transfer efficiency and output power in a defined region regardless of coupling coefficient variations without communication between Tx and Rx or control circuits for the receiver side. In contrast to couplers with non-identical Tx and Rx pads and multiple decoupled coils in the Rx pad, the compact CP-CP magnetic coupler with a single identical coil on the Tx and Rx is more robust at a wider transfer distance (air gap) and lateral and rotational misalignment between the Tx and Rx. The proposed 1-kW robust WPT system with up to a 20 cm air gap between the Tx and Rx and up to 12 cm lateral misalignment in all directions at a 15 cm air gap and all degrees of rotational misalignment can tolerate coupling variations and achieve constant output power with 93% constant transfer efficiency.
- 20 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Robust Wireless Power Transfer by Self-Oscillating Controlled Inverter and Circular Pads
Inductive wireless power transfer (WPT) faces significant challenges in achieving high efficiency and stable output power for charging mobile devices like EVs. Using circular pads (CP) as the transmitter (Tx) and receiver (Rx) and a self-oscillating controlled inverter, this paper demonstrates a robust WPT system that maintains high constant transfer efficiency and output power in a defined region regardless of coupling coefficient variations without communication between Tx and Rx or control circuits for the receiver side. In contrast to couplers with non-identical Tx and Rx pads and multiple decoupled coils in the Rx pad, the compact CP-CP magnetic coupler with a single identical coil on the Tx and Rx is more robust at a wider transfer distance (air gap) and lateral and rotational misalignment between the Tx and Rx. The proposed 1-kW robust WPT system with up to a 20 cm air gap between the Tx and Rx and up to 12 cm lateral misalignment in all directions at a 15 cm air gap and all degrees of rotational misalignment can tolerate coupling variations and achieve constant output power with 93% constant transfer efficiency.
- 20 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Comparative Study of Alternative-Pole Flux Switching and Inter-Modular Biased-Flux Permanent Magnet Motors
This paper executes a comparative analysis between alternative-pole flux-switching and inter-modular biased-flux permanent magnet (PM) motors. Despite their close structural similarities, the former puts magnets not only between stator modules, but also close to the armature windings. However, the inter-modular PM (IMPM) motor only occupies spaces between stator modules. This type of occupation allows this structure to provide a safe operation point for PMs. Not considering the PM’s recoil-phenomenon, the torque density of the IMPM motor is not as significant as the alternative-pole flux-switching PM (AP-FSPM) motor. This is because of the four-operating mode of the AP-FSPM structure which enables it to increase the torque density by utilizing the PMs in every moment of the operation. But, when the demagnetization of the AP-FSPM’s PMs is taken into account, the torque density and torque per PM values of the AP-FSPM structure plummets. A complete full-load demagnetization analysis is done in order to get a better understanding of how the performance of the IMPM structure supersedes the AP-FSPM structure. 2D finite element analysis is used to extract the most important indexes of both topologies.
- 20 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Comparative Study of Alternative-Pole Flux Switching and Inter-Modular Biased-Flux Permanent Magnet Motors
This paper executes a comparative analysis between alternative-pole flux-switching and inter-modular biased-flux permanent magnet (PM) motors. Despite their close structural similarities, the former puts magnets not only between stator modules, but also close to the armature windings. However, the inter-modular PM (IMPM) motor only occupies spaces between stator modules. This type of occupation allows this structure to provide a safe operation point for PMs. Not considering the PM’s recoil-phenomenon, the torque density of the IMPM motor is not as significant as the alternative-pole flux-switching PM (AP-FSPM) motor. This is because of the four-operating mode of the AP-FSPM structure which enables it to increase the torque density by utilizing the PMs in every moment of the operation. But, when the demagnetization of the AP-FSPM’s PMs is taken into account, the torque density and torque per PM values of the AP-FSPM structure plummets. A complete full-load demagnetization analysis is done in order to get a better understanding of how the performance of the IMPM structure supersedes the AP-FSPM structure. 2D finite element analysis is used to extract the most important indexes of both topologies.
- 17 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1021-1026
Robust Wireless Power Transfer by Self-Oscillating Controlled Inverter and Tripolar Receiving Pad
Stable power transfer with constant and high transfer efficiency to moving devices is a major challenge in wireless power transfer (WPT). The amount of transferred power and efficiency is sensitive to magnetic coupling coefficient variations. Many control methods based on continuous analysis of WPT systems have been proposed to ensure stable and optimal power transfer between transmitter and receiver in variable magnetic coupling conditions. This paper presents a robust WPT system to coupling coefficient variations using a self-oscillating controlled inverter without any communication link between the transmitter and receiver and other auxiliary control circuits. In this research, the receiving tripolar pad (TPP) is used with this type of inverter for the first time, providing an improved robust WPT to charge electric vehicles. At air gaps between 10 and 29 cm, and long ranges of lateral misalignments, the output power is approximately 1000 watts with a difference of less than 20%, and the system efficiency is higher than 92%. In rotational displacements, efficiency remains high with output power variations around 1000 watts with a difference of less than 40%. Thus the proposed system automatically provides an almost constant output power with high efficiency in a certain range of displacements and misalignments of the receiving pad.
- 17 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1021-1026
Robust Wireless Power Transfer by Self-Oscillating Controlled Inverter and Tripolar Receiving Pad
Stable power transfer with constant and high transfer efficiency to moving devices is a major challenge in wireless power transfer (WPT). The amount of transferred power and efficiency is sensitive to magnetic coupling coefficient variations. Many control methods based on continuous analysis of WPT systems have been proposed to ensure stable and optimal power transfer between transmitter and receiver in variable magnetic coupling conditions. This paper presents a robust WPT system to coupling coefficient variations using a self-oscillating controlled inverter without any communication link between the transmitter and receiver and other auxiliary control circuits. In this research, the receiving tripolar pad (TPP) is used with this type of inverter for the first time, providing an improved robust WPT to charge electric vehicles. At air gaps between 10 and 29 cm, and long ranges of lateral misalignments, the output power is approximately 1000 watts with a difference of less than 20%, and the system efficiency is higher than 92%. In rotational displacements, efficiency remains high with output power variations around 1000 watts with a difference of less than 40%. Thus the proposed system automatically provides an almost constant output power with high efficiency in a certain range of displacements and misalignments of the receiving pad.
- 23 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Analytical Modeling and Electrical Equivalent Circuit Extraction for a Flux Switching PM Motor for EVs
Flux switching permanent magnet motor (FSPMM) is a competitive candidate for high torque density and high-speed capability applications. Due to the high non-linear structure, generally, finite element analysis (FEA) is applied to the motor structure to calculate the electromagnetic performance of the FSPMM. The time-consuming behavior of this method leads to the search for new techniques. Magnetic equivalent circuit (MEC) and Fourier series analysis (FSA) have been adopted to the FSPMM. However, the former suffers from coarse discretization, and the latter contains complicated mathematical structures. In this paper, the machine equations in the ABC-reference frame and DQ-frame will be extracted, and the electromagnetic performance of a 12/10 FSPMM is evaluated using the electrical equivalent circuit (EEC). The inductance matrix of the machine is the base of this model. Therefore, the method can be used in the other structures of the FSPMM, such as the axial one or the radial with a different number of poles and slots. To verify the correctness of the proposed method, we compare the results. The simulation results, such as electromagnetic torque, self-inductance, mutual inductance, input power, and efficiency of the proposed method, align well with FEA results.
- 23 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Analytical Modeling and Electrical Equivalent Circuit Extraction for a Flux Switching PM Motor for EVs
Flux switching permanent magnet motor (FSPMM) is a competitive candidate for high torque density and high-speed capability applications. Due to the high non-linear structure, generally, finite element analysis (FEA) is applied to the motor structure to calculate the electromagnetic performance of the FSPMM. The time-consuming behavior of this method leads to the search for new techniques. Magnetic equivalent circuit (MEC) and Fourier series analysis (FSA) have been adopted to the FSPMM. However, the former suffers from coarse discretization, and the latter contains complicated mathematical structures. In this paper, the machine equations in the ABC-reference frame and DQ-frame will be extracted, and the electromagnetic performance of a 12/10 FSPMM is evaluated using the electrical equivalent circuit (EEC). The inductance matrix of the machine is the base of this model. Therefore, the method can be used in the other structures of the FSPMM, such as the axial one or the radial with a different number of poles and slots. To verify the correctness of the proposed method, we compare the results. The simulation results, such as electromagnetic torque, self-inductance, mutual inductance, input power, and efficiency of the proposed method, align well with FEA results.
- 1 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 587-591
Six Degrees of Freedom Wireless Power Transfer by Crossed Dipole Transmitting Coils and the Minimum Number of Receiving Coils
Inductive wireless power transfer (WPT) to a moving receiver (Rx) can be evaluated by the Rx displacements and rotations relative to the transmitter (Tx). Three degrees of freedom (3 DoF) in displacements and 3 DoF in rotations of the Rx can be defined. This research has designed a system with the highest DoF (6 DoF). The Tx has crossed dipole coils, and the Rx has the minimum number of coils for 3-D omnidirectional WPT. Unlike most studies on 3-D omnidirectional WPT, the Tx and Rx have flat structures in this study, which can be an essential advantage in transferring power to moving devices. Because of variable magnetic coupling, the compensation circuit has the LCC-S topology. With a 2.4 cm transfer distance, power transfer efficiency is higher than 80% in the Rx displacements, and the maximum transfer power reaches about 700 watts. The efficiency remains high in the Rx rotations around the z-axis (yaw rotations) with output power changes. The efficiency is also acceptable in the Rx rotations around the x and y axes (roll and pitch rotations). Therefore, the proposed WPT system provides 6 DoF with the flat Tx and Rx structures.
- 1 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 587-591
Six Degrees of Freedom Wireless Power Transfer by Crossed Dipole Transmitting Coils and the Minimum Number of Receiving Coils
Inductive wireless power transfer (WPT) to a moving receiver (Rx) can be evaluated by the Rx displacements and rotations relative to the transmitter (Tx). Three degrees of freedom (3 DoF) in displacements and 3 DoF in rotations of the Rx can be defined. This research has designed a system with the highest DoF (6 DoF). The Tx has crossed dipole coils, and the Rx has the minimum number of coils for 3-D omnidirectional WPT. Unlike most studies on 3-D omnidirectional WPT, the Tx and Rx have flat structures in this study, which can be an essential advantage in transferring power to moving devices. Because of variable magnetic coupling, the compensation circuit has the LCC-S topology. With a 2.4 cm transfer distance, power transfer efficiency is higher than 80% in the Rx displacements, and the maximum transfer power reaches about 700 watts. The efficiency remains high in the Rx rotations around the z-axis (yaw rotations) with output power changes. The efficiency is also acceptable in the Rx rotations around the x and y axes (roll and pitch rotations). Therefore, the proposed WPT system provides 6 DoF with the flat Tx and Rx structures.