Teresa Gerace
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Teresa Gerace has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Alfonso Policicchio
University of Calabria
2 shared publications - Carlo Poselle Bonaventura
Department of Physics, University of Calabria, 87036 Rende, CS, Italy
2 shared publications - Daniela Pacile
Università della Calabria
2 shared publications - Raffaele Giuseppe Agostino
University of Calabria
2 shared publications - Andrea Scarcello
Surface Nanoscience Group, Department of Physics, University of Calabria, 87036 Rende, Italy
1 shared publication - Antonio Telesca
Dipartimento di Ingegneria, Università degli Studi della Basilicata, via dell’Ateneo Lucano 10, 85100 Potenza, Italy
1 shared publication
Latest Publications
- Open Access
- 17 September 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (18) , 185001
Multi-scale pore structure characterisation of graphene-doped cement mortars
The presence of an internal pore structure is an intrinsic characteristic of all cementitious compounds, with pore sizes spanning from angstroms to millimetres. Investigating porosity is crucial to understand and predict the mechanical and transport behaviour of cement-based materials; however, no single experimental technique is capable of capturing the full range of pore sizes, making a multi-scale approach necessary. In this study, three types of cement mortar are examined: a control mortar with no additives (C), and two graphene-doped mortars containing 1 wt% of graphene technical grade (1TG) and 1 wt% of graphene oxide (1GO), respectively. Consistency, flexural and compressive strength, and capillary water absorption (CWA), previously reported, are correlated with the pore structure, characterized by nitrogen physisorption ( N 2 ), mercury intrusion porosimetry (MIP), and x-ray microcomputed tomography ( μ -CT). Despite a considerable reduction in consistency, the doped mortars, 1TG and 1GO, do not show appreciable variations in compressive strength compared to mortar C, while they show a reduction in CWA of the 22% and 15% respectively. Morphological analysis was conducted on data collected by μ -CT: mortar C shows a significant contribution of low-sphericity pores associated with microcracks, 1GO is dominated by highly spherical pores consistent with entrapped air voids, and 1TG presents a broader distribution of sphericity. Overall, analysing and merging the pore size distribution data obtained from N 2 , MIP and μ -CT, allowed us to cover a range of pore size from 2 nm to 10 mm and correlate the macroscopic behaviour to the internal pore structure of cement mortars.
- 17 September 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (18) , 185001
Open AccessMulti-scale pore structure characterisation of graphene-doped cement mortars
The presence of an internal pore structure is an intrinsic characteristic of all cementitious compounds, with pore sizes spanning from angstroms to millimetres. Investigating porosity is crucial to understand and predict the mechanical and transport behaviour of cement-based materials; however, no single experimental technique is capable of capturing the full range of pore sizes, making a multi-scale approach necessary. In this study, three types of cement mortar are examined: a control mortar with no additives (C), and two graphene-doped mortars containing 1 wt% of graphene technical grade (1TG) and 1 wt% of graphene oxide (1GO), respectively. Consistency, flexural and compressive strength, and capillary water absorption (CWA), previously reported, are correlated with the pore structure, characterized by nitrogen physisorption ( N 2 ), mercury intrusion porosimetry (MIP), and x-ray microcomputed tomography ( μ -CT). Despite a considerable reduction in consistency, the doped mortars, 1TG and 1GO, do not show appreciable variations in compressive strength compared to mortar C, while they show a reduction in CWA of the 22% and 15% respectively. Morphological analysis was conducted on data collected by μ -CT: mortar C shows a significant contribution of low-sphericity pores associated with microcracks, 1GO is dominated by highly spherical pores consistent with entrapped air voids, and 1TG presents a broader distribution of sphericity. Overall, analysing and merging the pore size distribution data obtained from N 2 , MIP and μ -CT, allowed us to cover a range of pore size from 2 nm to 10 mm and correlate the macroscopic behaviour to the internal pore structure of cement mortars.
- Open Access
- 16 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (2) , 835
On the Stability of Graphene-Based Aqueous Dispersions and Their Performance in Cement Mortar
Cement composites containing different carbon nanomaterials, namely graphene technical grade, graphene super grade, and graphene oxide, up to 1.0% by weight of cement, were prepared. Ultrasonic, chemical, and thermochemical treatments were applied to improve the stability of the dispersions containing the graphene-based nanomaterials. Their exfoliation was analyzed using Raman spectroscopy, and the stability of the dispersions was quantitatively investigated by means of the static multiple light scattering (SMLS) technique. The sonication process enhanced the intensity of the 2D band of graphene technical grade, suggesting a partial degree of exfoliation, while the hydrothermal treatment with sodium cholate significantly promoted the stability of its dispersion. The effect of the addition of selected graphene-based nanomaterials in mortars was evaluated in terms of fresh state properties, mechanical strength, capillary water absorption, and pore size distribution. Workability decreased with the increase in the amount of carbon nanomaterials. Field emission scanning electron microscopy (FESEM) was also employed to characterize the microstructure of pristine graphene-based nanomaterials and their inclusion within the cement matrix. Our results suggest that mechanical properties are only moderately affected by the inclusion of all additives, whereas the introduction of graphene significantly influences the coefficient of capillary water absorption. Specifically, a reduction of about 20% in the capillary water absorption coefficient was observed at the concentration of 1.0 wt% of graphene technical grade, which is ascribed to a refinement of the porosity.
- 16 January 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (2) , 835
Open AccessOn the Stability of Graphene-Based Aqueous Dispersions and Their Performance in Cement Mortar
Cement composites containing different carbon nanomaterials, namely graphene technical grade, graphene super grade, and graphene oxide, up to 1.0% by weight of cement, were prepared. Ultrasonic, chemical, and thermochemical treatments were applied to improve the stability of the dispersions containing the graphene-based nanomaterials. Their exfoliation was analyzed using Raman spectroscopy, and the stability of the dispersions was quantitatively investigated by means of the static multiple light scattering (SMLS) technique. The sonication process enhanced the intensity of the 2D band of graphene technical grade, suggesting a partial degree of exfoliation, while the hydrothermal treatment with sodium cholate significantly promoted the stability of its dispersion. The effect of the addition of selected graphene-based nanomaterials in mortars was evaluated in terms of fresh state properties, mechanical strength, capillary water absorption, and pore size distribution. Workability decreased with the increase in the amount of carbon nanomaterials. Field emission scanning electron microscopy (FESEM) was also employed to characterize the microstructure of pristine graphene-based nanomaterials and their inclusion within the cement matrix. Our results suggest that mechanical properties are only moderately affected by the inclusion of all additives, whereas the introduction of graphene significantly influences the coefficient of capillary water absorption. Specifically, a reduction of about 20% in the capillary water absorption coefficient was observed at the concentration of 1.0 wt% of graphene technical grade, which is ascribed to a refinement of the porosity.