Muhammad Junaid Saleem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Muhammad Junaid Saleem has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Asfandyar Khan
Department of Textile and Apparel Sciences, School of Design and Textile, University of Management and Technology (UMT), C-II Johar Town, Lahore 54770, Pakistan
4 shared publications - Imran Ahmad Khan
Department of Textile and Apparel Sciences, School of Design and Textile, University of Management and Technology (UMT), C-II Johar Town, Lahore 54770, Pakistan
4 shared publications - Kashif Javed
Department of Textile and Apparel Sciences, School of Design and Textile, University of Management and Technology (UMT), C-II Johar Town, Lahore 54770, Pakistan
4 shared publications - Fiaz Hussain
Department of Mechanical Engineering, Gachon University, Seongnam-si 13120, Republic of Korea
2 shared publications - Tayyab Naveed
School of Design and Textiles University of Management and Technology Lahore Pakistan
2 shared publications Abdul Azeem
1 shared publication
Latest Publications
- 8 October 2026
- Published by Wiley in Coloration Technology
Towards predictive and sustainable indigo dyeing of denim: Linking redox chemistry, dye transport and yarn architecture
Indigo ring dyeing defines denim's characteristic appearance and fading behaviour by selectively colouring the yarn surface while preserving its white core. The key challenge is controlling radial indigo penetration to achieve the desired ring structure without unnecessary dye and chemical consumption. Existing research addresses indigo redox chemistry, dyeing technologies, reduction systems, sustainable colouration and process optimization, but these aspects remain insufficiently integrated around quantitative penetration and ring formation control. This review critically examines the mechanisms governing indigo reduction, adsorption, diffusion and oxidation, together with dye transport, pH, oxidation time, dip–nip sequences, reducing systems, fibre properties and yarn architecture. Conventional and emerging technologies, including rope and slasher dyeing, nitrogen‐assisted, electrochemical and foam dyeing, pretreatments and advanced reducing agents, are evaluated for penetration, ring quality, sustainability and industrial applicability. Digitalization through sensing, machine vision, automated redox control and artificial intelligence is also assessed. This review aims to establish an integrated framework for predictive, sustainable and intelligent control of indigo penetration.
- 8 October 2026
- Published by Wiley in Coloration Technology
Towards predictive and sustainable indigo dyeing of denim: Linking redox chemistry, dye transport and yarn architecture
Indigo ring dyeing defines denim's characteristic appearance and fading behaviour by selectively colouring the yarn surface while preserving its white core. The key challenge is controlling radial indigo penetration to achieve the desired ring structure without unnecessary dye and chemical consumption. Existing research addresses indigo redox chemistry, dyeing technologies, reduction systems, sustainable colouration and process optimization, but these aspects remain insufficiently integrated around quantitative penetration and ring formation control. This review critically examines the mechanisms governing indigo reduction, adsorption, diffusion and oxidation, together with dye transport, pH, oxidation time, dip–nip sequences, reducing systems, fibre properties and yarn architecture. Conventional and emerging technologies, including rope and slasher dyeing, nitrogen‐assisted, electrochemical and foam dyeing, pretreatments and advanced reducing agents, are evaluated for penetration, ring quality, sustainability and industrial applicability. Digitalization through sensing, machine vision, automated redox control and artificial intelligence is also assessed. This review aims to establish an integrated framework for predictive, sustainable and intelligent control of indigo penetration.
- Open Access
Antibacterial and Antioxidant Activity of Cotton Fabric Treated with Alginate-Based Microcapsules Containing Nigella sativa Oil as Core Material
This study investigates the fabrication of microcapsules using Nigella sativa (N.S.) oil as the core and alginate as the shell material. The N.S. oil microcapsules were prepared using the sol–gel method with different oil concentrations. The microcapsules were applied to the cotton fabric by the pad–dry–cure method, and their attachment was evidenced by scanning electron microscopy (SEM). Air permeability measurements were conducted for all developed samples, revealing that the sample with 8 g loading of N.S. oil and 4.5 g alginate exhibited a 43% reduction compared to the pristine sample. To further investigate the comfort characteristics of the samples, the functionalized cotton samples were subjected to the water vapor permeability index test. The results yielded an index value of 90, indicating that the encapsulation process preserved the comfort characteristics of the samples. Among the samples, the specimen with an oil concentration of 8 mL displayed the maximum antibacterial performance, achieving a 90% reduction in colony-forming units (CFUs) following quantitative testing protocol. However, the qualitative antibacterial assessment indicates no clear zone of inhibition, but no bacterial growth was observed on the samples. Furthermore, the fabric incorporating the maximum loadings of N.S. oil and alginate capsules exhibited the maximum antioxidant activity of 86.5%. These results underscore the critical role of N.S. oil microcapsules in enhancing the antibacterial and antioxidant properties of cotton fabric, while also revealing a harmony between functional performance and comfort characteristics.
Open AccessAntibacterial and Antioxidant Activity of Cotton Fabric Treated with Alginate-Based Microcapsules Containing Nigella sativa Oil as Core Material
This study investigates the fabrication of microcapsules using Nigella sativa (N.S.) oil as the core and alginate as the shell material. The N.S. oil microcapsules were prepared using the sol–gel method with different oil concentrations. The microcapsules were applied to the cotton fabric by the pad–dry–cure method, and their attachment was evidenced by scanning electron microscopy (SEM). Air permeability measurements were conducted for all developed samples, revealing that the sample with 8 g loading of N.S. oil and 4.5 g alginate exhibited a 43% reduction compared to the pristine sample. To further investigate the comfort characteristics of the samples, the functionalized cotton samples were subjected to the water vapor permeability index test. The results yielded an index value of 90, indicating that the encapsulation process preserved the comfort characteristics of the samples. Among the samples, the specimen with an oil concentration of 8 mL displayed the maximum antibacterial performance, achieving a 90% reduction in colony-forming units (CFUs) following quantitative testing protocol. However, the qualitative antibacterial assessment indicates no clear zone of inhibition, but no bacterial growth was observed on the samples. Furthermore, the fabric incorporating the maximum loadings of N.S. oil and alginate capsules exhibited the maximum antioxidant activity of 86.5%. These results underscore the critical role of N.S. oil microcapsules in enhancing the antibacterial and antioxidant properties of cotton fabric, while also revealing a harmony between functional performance and comfort characteristics.
- Open Access
- 24 December 2025
- Published by University of Ljubljana in Tekstilec
- Vol. 68 (4) , 336-353
Enhancing Mechanical Performance of Kevlar Composites Through Optimised Stitching Parameters
The study explores the development of stitched reinforced composites using Kevlar woven fabric as the primary reinforcement. The influence of stitching parameters, stitch type, needle type and stitches per cm (SPC) on the mechanical performance of the composites was systematically investigated. Kevlar fabric was stitched using different needle types and SPC values before being mechanically tested for tensile strength, delamination resistance and impact performance. The results demonstrate that composites stitched with a ballpoint needle using a chain stitch at 3.94 SPC exhibited the highest mechanical strength, with tensile strength increasing from 145 MPa (unstitched) to 191.5 MPa (lock stitch) and 240 MPa (chain stitch). Impact resistance improved from 98 kJ/m² (unstitched) to 133 kJ/m² (ballpoint needle, lock stitch), with chain-stitched composites showing even better performance due to the greater load distribution of the sewing thread and reduced fabric damage. Conversely, lock-stitched composites provided superior delamination resistance due to enhanced interlayer gripping. These findings highlight the potential of the developed composite for advanced protective applications, including bulletproof vests and aerospace structures requiring superior impact resistance and structural integrity.
- 24 December 2025
- Published by University of Ljubljana in Tekstilec
- Vol. 68 (4) , 336-353
Open AccessEnhancing Mechanical Performance of Kevlar Composites Through Optimised Stitching Parameters
The study explores the development of stitched reinforced composites using Kevlar woven fabric as the primary reinforcement. The influence of stitching parameters, stitch type, needle type and stitches per cm (SPC) on the mechanical performance of the composites was systematically investigated. Kevlar fabric was stitched using different needle types and SPC values before being mechanically tested for tensile strength, delamination resistance and impact performance. The results demonstrate that composites stitched with a ballpoint needle using a chain stitch at 3.94 SPC exhibited the highest mechanical strength, with tensile strength increasing from 145 MPa (unstitched) to 191.5 MPa (lock stitch) and 240 MPa (chain stitch). Impact resistance improved from 98 kJ/m² (unstitched) to 133 kJ/m² (ballpoint needle, lock stitch), with chain-stitched composites showing even better performance due to the greater load distribution of the sewing thread and reduced fabric damage. Conversely, lock-stitched composites provided superior delamination resistance due to enhanced interlayer gripping. These findings highlight the potential of the developed composite for advanced protective applications, including bulletproof vests and aerospace structures requiring superior impact resistance and structural integrity.
- Open Access
Performance Evaluation of Low-Grade Clay Minerals in LC3-Based Cementitious Composites
The cements industry is increasingly under pressure to reduce carbon emissions while maintaining performance standards. Limestone calcined clay cement (LC3) presents a promising low-carbon alternative; however, its performance depends significantly on the type and reactivity of clay used. This study investigates the effect of three common low-grade clay minerals—kaolinite, montmorillonite, and illite—on the behavior of LC3 blends. The clays were thermally activated and characterized using X-ray diffraction (XRD), thermogravimetric analysis (TGA), X-ray fluorescence spectroscopy (XRF), and Blaine air permeability testing to evaluate their mineralogical composition, thermal behavior, chemical content, and fineness. Pozzolanic reactivity was assessed using the modified Chapelle test. Microstructural development was examined through scanning electron microscopy (SEM) of the hydrated specimens at 28 days. The results confirmed a strong correlation between clay reactivity and hydration performance. Kaolinite showed the highest reactivity and fineness, contributing to a dense microstructure with reduced portlandite and enhanced formation of calcium silicate hydrate. Montmorillonite demonstrated comparable strength and favorable hydration characteristics, while illite, though less reactive initially, showed acceptable long-term behavior. Although kaolinite delivered the best overall performance, its limited availability and higher cost suggest that montmorillonite and illite represent viable and cost-effective alternatives, particularly in regions where kaolinite is scarce. This study highlights the suitability of regionally available, low-grade clays for use in LC3 systems, supporting sustainable and economically viable cement production.
Open AccessPerformance Evaluation of Low-Grade Clay Minerals in LC3-Based Cementitious Composites
The cements industry is increasingly under pressure to reduce carbon emissions while maintaining performance standards. Limestone calcined clay cement (LC3) presents a promising low-carbon alternative; however, its performance depends significantly on the type and reactivity of clay used. This study investigates the effect of three common low-grade clay minerals—kaolinite, montmorillonite, and illite—on the behavior of LC3 blends. The clays were thermally activated and characterized using X-ray diffraction (XRD), thermogravimetric analysis (TGA), X-ray fluorescence spectroscopy (XRF), and Blaine air permeability testing to evaluate their mineralogical composition, thermal behavior, chemical content, and fineness. Pozzolanic reactivity was assessed using the modified Chapelle test. Microstructural development was examined through scanning electron microscopy (SEM) of the hydrated specimens at 28 days. The results confirmed a strong correlation between clay reactivity and hydration performance. Kaolinite showed the highest reactivity and fineness, contributing to a dense microstructure with reduced portlandite and enhanced formation of calcium silicate hydrate. Montmorillonite demonstrated comparable strength and favorable hydration characteristics, while illite, though less reactive initially, showed acceptable long-term behavior. Although kaolinite delivered the best overall performance, its limited availability and higher cost suggest that montmorillonite and illite represent viable and cost-effective alternatives, particularly in regions where kaolinite is scarce. This study highlights the suitability of regionally available, low-grade clays for use in LC3 systems, supporting sustainable and economically viable cement production.
- Open Access
Sustainable Fruit Preservation Using Algae-Based Bioactive Coatings on Textile Packaging
This study explores the potential of using natural textile packaging infused with algae-based coatings as an eco-friendly alternative to traditional plastic packaging for extending fruit shelf life. Traditional plastic packaging is known to release harmful chemicals into both food and the environment, which underscores the need for safer, more sustainable alternatives. This study investigates algae from three distinct groups—green, red, and brown algae—renowned for their rich bioactive compounds that exhibit natural preservative properties. Algae powders were prepared via immersion in purified water, boiling, and mixing with gum arabic to form a gelatinous coating solution. The algae coating was applied to knitted fabric, which was then crafted into bags for storing fruits such as tomatoes and apples. Over 21 days, the texture, weight loss, and juice content of the fruits stored in algae-coated bags were monitored and compared to those stored in uncoated packaging. The results showed that fruits in algae-coated packaging demonstrated significantly less weight loss and retained better texture. In terms of weight, the combination of red, green, and brown algae-coated packaging demonstrated the lowest reduction in weight for tomatoes (4.2%) and apples (3.8%) after 21 days, outperforming uncoated packaging, which exhibited reductions of 11.2% and 10.8%, respectively. These findings support the potential of algae-coated textile packaging to reduce reliance on conventional plastics while maintaining fruit quality during storage.
Open AccessSustainable Fruit Preservation Using Algae-Based Bioactive Coatings on Textile Packaging
This study explores the potential of using natural textile packaging infused with algae-based coatings as an eco-friendly alternative to traditional plastic packaging for extending fruit shelf life. Traditional plastic packaging is known to release harmful chemicals into both food and the environment, which underscores the need for safer, more sustainable alternatives. This study investigates algae from three distinct groups—green, red, and brown algae—renowned for their rich bioactive compounds that exhibit natural preservative properties. Algae powders were prepared via immersion in purified water, boiling, and mixing with gum arabic to form a gelatinous coating solution. The algae coating was applied to knitted fabric, which was then crafted into bags for storing fruits such as tomatoes and apples. Over 21 days, the texture, weight loss, and juice content of the fruits stored in algae-coated bags were monitored and compared to those stored in uncoated packaging. The results showed that fruits in algae-coated packaging demonstrated significantly less weight loss and retained better texture. In terms of weight, the combination of red, green, and brown algae-coated packaging demonstrated the lowest reduction in weight for tomatoes (4.2%) and apples (3.8%) after 21 days, outperforming uncoated packaging, which exhibited reductions of 11.2% and 10.8%, respectively. These findings support the potential of algae-coated textile packaging to reduce reliance on conventional plastics while maintaining fruit quality during storage.