Kseniia D. Zagorovskaia
Research Subjects
Research Interests
Kseniia D. Zagorovskaia has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandra G. Boldyreva
Skolkovo Institute of Science and Technology, Nobel Street 3, Moscow 143026, Russia
3 shared publications - Aleksandra N. Zhivchikova
Center for Energy Science and Technology (CEST), Skolkovo Institute of Science and Technology, Nobel st. 3, 143026 Moscow, Russia
2 shared publications - Marina M. Tepliakova
Skolkovo Institute of Science and Technology, Bolshoi Bld., 30, b. 1, Moscow, 121205, Russian Federation
2 shared publications Oleg R. Trepalin
Skolkovo Institute of Science and Technology 1 , Bolshoi boulevard 30s1, Moscow 121205
2 shared publications- Sergey Yurevich Luchkin
Skolkovo Institute of Science and Technology Moscow Russian Federation
2 shared publications Albert G. Nasibulin
Center of Energy Sience and Technology (CEST) Skolkovo Institute of Science and Technology Bolshoi boulevard 30s1 Moscow 121205 Russia
1 shared publication
Latest Publications
- 21 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (12)
Studying the impact of different parylene derivatives on perovskite solar cells stability
This study evaluates the effectiveness of parylene derivatives as encapsulation materials for enhancing the stability of perovskite solar cells (PSCs). The research compares four types of parylene (N, C, D, and F) based on their ability to protect perovskite films and prevent PSC degradation under high temperature and humidity conditions. Experimental results indicate that parylene-C offers superior barrier properties, effectively suppressing perovskite decomposition under prolonged illumination and elevated temperatures in an ambient environment. Parylene-N demonstrates exceptional performance in encapsulating complete PSCs, achieving dark ambient storage stability for more than 10 000 h with minimal efficiency losses (2%) during dark ambient storage. Despite superior water barrier properties, chlorine-containing parylene derivatives (C and D) are found to be unsuitable for solar cells with silver top electrodes due to silver ion diffusion, resulting in device failure. In contrast, fluorinated parylene-F avoids this issue but shows lower moisture resistance. The findings emphasize the importance of material compatibility and suggest that unsubstituted parylene-N is the best candidate for PSC encapsulation in the case of silver electrodes and relatively low air humidity (RH < 35%).
- 21 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (12)
Studying the impact of different parylene derivatives on perovskite solar cells stability
This study evaluates the effectiveness of parylene derivatives as encapsulation materials for enhancing the stability of perovskite solar cells (PSCs). The research compares four types of parylene (N, C, D, and F) based on their ability to protect perovskite films and prevent PSC degradation under high temperature and humidity conditions. Experimental results indicate that parylene-C offers superior barrier properties, effectively suppressing perovskite decomposition under prolonged illumination and elevated temperatures in an ambient environment. Parylene-N demonstrates exceptional performance in encapsulating complete PSCs, achieving dark ambient storage stability for more than 10 000 h with minimal efficiency losses (2%) during dark ambient storage. Despite superior water barrier properties, chlorine-containing parylene derivatives (C and D) are found to be unsuitable for solar cells with silver top electrodes due to silver ion diffusion, resulting in device failure. In contrast, fluorinated parylene-F avoids this issue but shows lower moisture resistance. The findings emphasize the importance of material compatibility and suggest that unsubstituted parylene-N is the best candidate for PSC encapsulation in the case of silver electrodes and relatively low air humidity (RH < 35%).
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Boosting the stability of indoor perovskite solar cells by the rational selection of electron transport layers
This study investigates a series of electron transport materials (ETMs) in wide-bandgap perovskite solar cells with the Cs0.17FA0.83Pb(I0.6Br0.4)3 photoactive layer. Power conversion efficiencies of up to 23.2% were achieved under an artificial light source (1000 lux, 6000 K LED) for the devices incorporating SnO2 passivated with fullerene derivative. However, the fullerene derivative induced rapid interfacial degradation. In contrast, solar cells utilizing SnO2 ETM passivated with amino-based compounds exhibited stable performance under continuous 1 Sun illumination during 2300 h in an inert atmosphere and under indoor lighting in ambient conditions. This was attributed to a reduced density of defects on the surface of the ETM and enhanced interfacial stability. These findings underscore the importance of the rational ETM selection for efficient and stable wide-bandgap perovskites.
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Boosting the stability of indoor perovskite solar cells by the rational selection of electron transport layers
This study investigates a series of electron transport materials (ETMs) in wide-bandgap perovskite solar cells with the Cs0.17FA0.83Pb(I0.6Br0.4)3 photoactive layer. Power conversion efficiencies of up to 23.2% were achieved under an artificial light source (1000 lux, 6000 K LED) for the devices incorporating SnO2 passivated with fullerene derivative. However, the fullerene derivative induced rapid interfacial degradation. In contrast, solar cells utilizing SnO2 ETM passivated with amino-based compounds exhibited stable performance under continuous 1 Sun illumination during 2300 h in an inert atmosphere and under indoor lighting in ambient conditions. This was attributed to a reduced density of defects on the surface of the ETM and enhanced interfacial stability. These findings underscore the importance of the rational ETM selection for efficient and stable wide-bandgap perovskites.
Improved Operational Lifetime of MAPbI3 Solar Cells Encapsulated with Parylene‐N
Herein, unsubstituted poly‐para‐xylylene (parylene‐N) film as an encapsulation material for MAPbI3 perovskite solar cells (PSCs) is assessed. Unlike more commonly used parylene‐C, parylene‐N is cheaper and does not contain Cl which makes it a promising encapsulant for perovskite materials. Being deposited by room temperature chemical vapor deposition in a vacuum, 2 mm‐thick parylene film stabilizes MAPbI3‐based solar cells and inhibits the degradation even under stress test conditions (85 °C in the air). Moreover, the solar cells, encapsulated with the parylene‐N film and cover glass, show stable characteristics for over 3800 h in a dark ambient atmosphere, retaining 92% of their initial power conversion efficiency. Such results demonstrate the potential of unsubstituted parylene for PSC stabilization, paving the way for novel and highly stable PSCs.
Improved Operational Lifetime of MAPbI3 Solar Cells Encapsulated with Parylene‐N
Herein, unsubstituted poly‐para‐xylylene (parylene‐N) film as an encapsulation material for MAPbI3 perovskite solar cells (PSCs) is assessed. Unlike more commonly used parylene‐C, parylene‐N is cheaper and does not contain Cl which makes it a promising encapsulant for perovskite materials. Being deposited by room temperature chemical vapor deposition in a vacuum, 2 mm‐thick parylene film stabilizes MAPbI3‐based solar cells and inhibits the degradation even under stress test conditions (85 °C in the air). Moreover, the solar cells, encapsulated with the parylene‐N film and cover glass, show stable characteristics for over 3800 h in a dark ambient atmosphere, retaining 92% of their initial power conversion efficiency. Such results demonstrate the potential of unsubstituted parylene for PSC stabilization, paving the way for novel and highly stable PSCs.