Omer Lutfu Toktas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Omer Lutfu Toktas has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Mustafa Onur
The University of Tulsa, Tulsa, USA
2 shared publications - Quang Minh Nguyen
University of Tulsa, Tulsa, Oklahoma, USA
2 shared publications - Faruk Omer Alpak
Shell International Exploration and Production Inc., Houston, Texas, USA
1 shared publication
Latest Publications
- 28 August 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (11) , 7023-7036
Nonlinearly Constrained Life-Cycle Production Optimization Under Geological Uncertainty: A Realistic Application
Summary: This study presents a realistic application of our previously developed nonlinearly constrained stochastic gradient-based optimization framework that can efficiently solve nonlinearly constrained robust production optimization problems. We apply the optimization framework to a synthetic, yet realistic, field optimization problem using multiple history-matched realizations of the geologic model. For the synthetic realistic field example, the reservoir is assumed to undergo production for several years. Well controls (bottomhole pressures, or BHPs, for producers and water injection rates for injectors) on a sequence of control steps (time intervals) are optimized during the forecast period by maximizing the expected value of the net present value (NPV, or ensemble average) over multiple realizations of subsurface description for the subsequent 10 years of production under a waterflooding scenario subject to nonlinear constraints. The optimization framework is based on our in-house nonlinear optimizer employing sequential quadratic programming (SQP) coupled with stochastic simplex approximated gradients (StoSAG). It incorporates the line-search procedure within SQP and is referred to as line-search sequential quadratic programming (LS-SQP). We couple LS-SQP with two different constraint handling schemes: the expected value constraint scheme and the minimum-maximum (min-max) constraint scheme. Both bound constraints on well controls and nonlinear constraints on field liquid production rate (FLPR), field water injection rate FWIR, and/or individual producer water production rates are considered. We consider several different history-matched geological realizations of the realistic field example with several injectors and producers. A black-oil commercial reservoir simulator is utilized in the optimization workflow to assess the objective function with imposed constraints. Results show that the framework LS-SQP algorithm with StoSAG can effectively handle the nonlinear constraints in a robust life cycle production optimization problem. Moreover, our results show that the LS-SQP framework with any of the two different constraint-handling schemes considered effectively handles the nonlinear constraints in a life cycle robust production optimization problem. However, the expected value constraint scheme results in a higher optimal NPV than the min-max constraint scheme, but at the cost of possible constraint violation for some individual geological realizations. Application results demonstrate that our nonlinearly constrained stochastic gradient-based robust optimization framework has great potential to be a rapid approximate capability for performing life cycle production optimization under subsurface uncertainty with bound and nonlinear constraints.
- 28 August 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (11) , 7023-7036
Nonlinearly Constrained Life-Cycle Production Optimization Under Geological Uncertainty: A Realistic Application
Summary: This study presents a realistic application of our previously developed nonlinearly constrained stochastic gradient-based optimization framework that can efficiently solve nonlinearly constrained robust production optimization problems. We apply the optimization framework to a synthetic, yet realistic, field optimization problem using multiple history-matched realizations of the geologic model. For the synthetic realistic field example, the reservoir is assumed to undergo production for several years. Well controls (bottomhole pressures, or BHPs, for producers and water injection rates for injectors) on a sequence of control steps (time intervals) are optimized during the forecast period by maximizing the expected value of the net present value (NPV, or ensemble average) over multiple realizations of subsurface description for the subsequent 10 years of production under a waterflooding scenario subject to nonlinear constraints. The optimization framework is based on our in-house nonlinear optimizer employing sequential quadratic programming (SQP) coupled with stochastic simplex approximated gradients (StoSAG). It incorporates the line-search procedure within SQP and is referred to as line-search sequential quadratic programming (LS-SQP). We couple LS-SQP with two different constraint handling schemes: the expected value constraint scheme and the minimum-maximum (min-max) constraint scheme. Both bound constraints on well controls and nonlinear constraints on field liquid production rate (FLPR), field water injection rate FWIR, and/or individual producer water production rates are considered. We consider several different history-matched geological realizations of the realistic field example with several injectors and producers. A black-oil commercial reservoir simulator is utilized in the optimization workflow to assess the objective function with imposed constraints. Results show that the framework LS-SQP algorithm with StoSAG can effectively handle the nonlinear constraints in a robust life cycle production optimization problem. Moreover, our results show that the LS-SQP framework with any of the two different constraint-handling schemes considered effectively handles the nonlinear constraints in a life cycle robust production optimization problem. However, the expected value constraint scheme results in a higher optimal NPV than the min-max constraint scheme, but at the cost of possible constraint violation for some individual geological realizations. Application results demonstrate that our nonlinearly constrained stochastic gradient-based robust optimization framework has great potential to be a rapid approximate capability for performing life cycle production optimization under subsurface uncertainty with bound and nonlinear constraints.
- 9 January 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (03) , 1413-1431
Comparison of Constrained Life Cycle Production Optimization Algorithms Based on Stochastic Simplex Approximate Gradients
Summary: This study focuses on the optimization of net present value (NPV) with respect to well controls, such as injection rates and producing bottomhole pressures (BHPs), subject to the nonlinear constraints of field liquid production rate (FLPR) and water rate for producers (WWPR). The core challenge is to maximize NPV while adhering to both linear and nonlinear constraints, crucial for effective reservoir management. The research presents a detailed comparison of three sequential quadratic programming (SQP)-based optimizers—the Tulsa University nonlinearly constrained production optimizer (TU-NLCPO), our in-house nonlinear production optimizer, and two publicly available optimizers, namely sequential least squares programming optimizer (SLSQP), and sparse nonlinear optimizer (SNOPT)—highlighting their application in constrained life cycle production optimization, a key aspect of closed-loop reservoir management. These optimizers are evaluated based on their ability to handle optimization variables, such as BHPs and well injection rates, over fixed control steps. Stochastic simplex approximate gradient (StoSAG) is applied across the three algorithms for a fair comparison. This comparison is performed using the Brugge model for waterflooding, providing a rigorous real-world assessment of each optimizer’s performance. Our findings reveal that TU-NLCPO consistently achieves higher NPV compared with SLSQP and SNOPT, indicating its superior optimization capability. Additionally, TU-NLCPO and SLSQP are found to be robust against different initial guesses, demonstrating consistent NPV values, whereas SNOPT shows variability despite reasonable overall performance. Regarding optimization with nonlinear state constraints, the performances of three optimizers are highly dependent on the initial guesses. The study also explores the impact of varying the number of perturbations for stochastic gradient generation on optimizer performance, noting an improvement across all methods with more perturbations. In general, our results show that SNOPT requires more accurate gradients, that is, more StoSAG perturbations required, than the other two optimizers, SLSQP often requires scaling of the objective function, while TU-NLCPO is more robust as compared with SLSQP and SNOPT to different initial guesses with nonlinear state constraints.
- 9 January 2025
- Published by Society of Petroleum Engineers (SPE) in SPE Journal
- Vol. 30 (03) , 1413-1431
Comparison of Constrained Life Cycle Production Optimization Algorithms Based on Stochastic Simplex Approximate Gradients
Summary: This study focuses on the optimization of net present value (NPV) with respect to well controls, such as injection rates and producing bottomhole pressures (BHPs), subject to the nonlinear constraints of field liquid production rate (FLPR) and water rate for producers (WWPR). The core challenge is to maximize NPV while adhering to both linear and nonlinear constraints, crucial for effective reservoir management. The research presents a detailed comparison of three sequential quadratic programming (SQP)-based optimizers—the Tulsa University nonlinearly constrained production optimizer (TU-NLCPO), our in-house nonlinear production optimizer, and two publicly available optimizers, namely sequential least squares programming optimizer (SLSQP), and sparse nonlinear optimizer (SNOPT)—highlighting their application in constrained life cycle production optimization, a key aspect of closed-loop reservoir management. These optimizers are evaluated based on their ability to handle optimization variables, such as BHPs and well injection rates, over fixed control steps. Stochastic simplex approximate gradient (StoSAG) is applied across the three algorithms for a fair comparison. This comparison is performed using the Brugge model for waterflooding, providing a rigorous real-world assessment of each optimizer’s performance. Our findings reveal that TU-NLCPO consistently achieves higher NPV compared with SLSQP and SNOPT, indicating its superior optimization capability. Additionally, TU-NLCPO and SLSQP are found to be robust against different initial guesses, demonstrating consistent NPV values, whereas SNOPT shows variability despite reasonable overall performance. Regarding optimization with nonlinear state constraints, the performances of three optimizers are highly dependent on the initial guesses. The study also explores the impact of varying the number of perturbations for stochastic gradient generation on optimizer performance, noting an improvement across all methods with more perturbations. In general, our results show that SNOPT requires more accurate gradients, that is, more StoSAG perturbations required, than the other two optimizers, SLSQP often requires scaling of the objective function, while TU-NLCPO is more robust as compared with SLSQP and SNOPT to different initial guesses with nonlinear state constraints.