CHCejun Hu

Cejun Hu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cejun Hu has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Lewis Acid‐Activated High‐Entropy Layered Double Hydroxide for Superior Seawater Electrolysis

    by Tengyu Gui, Yifan Liu, Zhuotao Zheng, Yuchen Wang, Zhenxi Li, Zhuohang Wu, Hui Luo, Wenxian Liu, Cejun Hu, Yang Luo, et al.

    Seawater electrolysis has been identified as a sustainable approach for the industrialization of green hydrogen. However, this process is hindered by two significant factors: the sluggish anodic kinetics and chloride‐induced corrosion. In this study, we introduce Zn 2+ as a Lewis acid site into high‐entropy layered double hydroxide (LDH) to modulate both the interfacial microenvironment and the bulk electronic structure. The resulting catalyst requires overpotentials of 35 and 160 mV for the hydrogen/oxygen evolution reactions at 10 mA cm −2 , respectively, accompanied by small Tafel slopes. Furthermore, an anion‐exchange membrane electrolyzer demonstrates operational stability over a duration of 900 h at 1.5 A cm −2 . Theoretical and in situ analyses reveal that Zn 2+ exhibits a preference for adsorbing OH − , thereby repelling Cl − . Concurrently, this process induces oxygen vacancies and optimizes the d‑band centers of Fe/Co sites, establishing a interfacial/bulk dual regulation. This work offers a novel paradigm for the design of robust high‑entropy catalysts via Lewis acid doping for practical applications in harsh environments.

  • Electrocatalytic CO 2 Upgrading to Biodegradable Plastic by Bromine‐Assisted C 2 H 4 Oxidation and Polymerization

    by Maoyin Wang, Chen Wang, Mengqiu Xu, Yuhang Huang, Ruilin Wei, Hairui Ma, Boyu Hou, Cejun Hu, Guangyong Wang, Shuya Hao, et al.

    The electrochemical upgrading of carbon dioxide (CO 2 ) to long‐chain value‐added products has remained challenging due to the complex reaction pathways with sluggish carbon‐carbon coupling kinetics. Although ethylene (C 2 H 4 ), a major CO 2 electroreduction product, may serve as a potential alternative for the coupling and carbon‐chain elongation, the efficient C 2 H 4 oxidation under ambient conditions and selective control of the oxidation level still represent two main bottlenecks for realizing long‐chain products. Herein, we demonstrate an efficient tandem electrochemical approach for synthesizing polyglycolic acid (PGA) from CO 2 via the bromine‐assisted C 2 H 4 oxidation, followed by polymerization under mild conditions. This process is enabled by the temperature‐mediated electro‐oxidation of C 2 H 4 to bromoacetate, which overcomes the diffusion limitation imposed by the electrical double layer at room temperature. The resulting bromoacetate with sp 2 ‐hybridized carbon preferentially undergoes intermolecular nucleophilic attack, thus driving polymerization to PGA. This work presents a potential approach for converting CO 2 to biodegradable polyesters.

  • Efficient Polyethylene Furanoate Synthesis From CO 2 and 5‐(Hydroxymethyl)furfural

    by Boyu Hou, Ruilin Wei, Yuhang Huang, Hairui Ma, Cejun Hu, Guangyong Wang, Liangchun Li, Ximeng Lv, Gengfeng Zheng

    The sustainable synthesis of polyethylene furanoate (PEF) from waste‐derived CO 2 and 5‐(hydroxymethyl)furfural (HMF) is limited by kinetic mismatches, pH incompatibility, and stoichiometric imbalances in conventional cascade electrolysis systems. Herein, we propose a reaction‐pair recombination strategy that decouples key redox steps and selectively reintegrates them within a three‐cell cascade system. This configuration enables simultaneous generation of ethylene glycol (EG) and furandicarboxylic acid (FDCA) at industrial‐level current densities with Faradaic efficiencies of 71.5% and 87.1%, respectively, achieving a near‐optimal EG:FDCA ratio of 3:1. During a stable operation period of 25 h, the three‐cell cascade system exhibited a bis(2‐hydroxyethyl) furan‐2,5‐dicarboxylate (BHEF) productivity of 28.4 mmol L −1 h −1 and a PEF production rate of 2.1 g day −1 . Compared with the conventional routes, the new pathway achieves nearly 50‐fold higher energy efficiency and a low global warming potential of 0.83 g CO2‐eq per gram of PEF, providing a sustainable platform for waste valorization into high‐value polymers.

  • Tailoring the Spin State of CoFe PBA to Break the Activity‐Stability Trade‐off in H 2 O 2 Electrosynthesis

    by Yiran Li, Yong‐Yan Zhao, Zimeng Li, Jiuyi Wang, Qingchen Wu, Cejun Hu, Hongwei Zhang, Xuning Li, Xiaojun Bao, Pei Yuan

    Hydrogen peroxide (H 2 O 2 ) is an essential chemical whose conventional production is environmentally unsustainable, driving the pursuit of electrochemical synthesis via the two‑electron oxygen reduction reaction (2e – ORR). However, the intractable trade‐off between activity and stability hampers its industrialization, spin‐control engineering offers a compelling strategy that maintains structural integrity while enabling reversible electronic tunability. Herein, we demonstrate a CoFe Prussian blue analogue (CoFe PBA) catalyst with precisely regulated atomic coordination (Co─N─C─Fe) and spin states, enabling simultaneous high activity, selectivity, and stability in the 2e − ORR for H 2 O 2 production. This synergistic configuration pairs high‐spin Co sites, which facilitate strong O 2 adsorption, with low‐spin Fe sites that ensure structural robustness. The concerted effect of these sites effectively suppresses O─O bond cleavage, thereby guaranteeing high selectivity for H 2 O 2 generation. Consequently, CoFe PBA exhibits exceptional performance, achieving not only a high H 2 O 2 production rate of 6.74 mol g cat −1 h −1 with near‐100% initial selectivity but also outstanding operational stability, retaining 92.93% of its selectivity even after 3000 cycles in a concentrated alkaline electrolyte. Our work highlights spin‐state engineering as a viable strategy to overcome the longstanding activity, selectivity–stability trade‐off in electro‐synthesis H 2 O 2 .

  • Top Cited Papers

    Orbital engineering-activated intrinsic conduction enables ultra-high-rate performance zinc storage in manganese dioxide

    by Huihui Hu, Yanhong Feng, Zhiwei Wang, Longchao Zhuo, Cejun Hu, Imran Shakir, Dingsheng Wang, Xijun Liu

    An orbital engineering-activated intrinsic conduction strategy is developed based on single-atom Fe doping. It induces orbital hybridization between Fe and O atoms, leading to higher rate performance and enhanced cycling stability.


  • Open Access

    Cation doping driven performance optimization of MoS 2 nanoarrays for nitrate and sulfide co-electrolysis

    by Miaosen Yang, Xianghua Hou, Rao Fu, Zhiwei Wang, Cejun Hu, Guangzhi Hu, Longchao Zhuo, Xijun Liu

    Simultaneous nitrate reduction and sulfide oxidation reactions (NO3RR and SOR) to generate valuable chemicals represent an appealing strategy for green synthesis; however, the sluggish kinetics seriously hinder their application. Herein, we report that Ni dopants can optimize the electronic structure of MoS2, which thus favors the adsorption of reactants/intermediates and reduces the corresponding energy barriers. As a result, the designed catalyst shows a maximal Faradic efficiency of 88.4% and a corresponding yield rate of 66.7 μmol h‒1 cm‒2 for NH3 synthesis, accompanied by a high robustness over 60 h. Besides, it can also trigger the SOR activity with a low potential of 0.105 V vs. RHE to produce 10 mA cm‒2, far smaller than that needed for conventional water oxidation (1.545 V vs. RHE). Accordingly, a coupling system with NO3RR and SOR is constructed for synchronous formation of value-added products on both anode and cathode. This work demonstrates an attractive attempt to construct advanced MoS2-based catalysts towards electrosynthesis.


  • Open Access

    Dual-function FeCo bimetallic nanoclusters for ammonia electrosynthesis from nitrate/nitrite reduction

    by Miaosen Yang, Mingying Chen, Youqing Wang, Junjie Ma, Lang Zhang, Cejun Hu, Longchao Zhuo, Yanhong Feng, Xijun Liu

    Ammonia (NH3) plays a vital role in agriculture and chemical manufacturing, yet its conventional production is energy-intensive and environmentally harmful. Developing cleaner, more efficient alternatives is essential. Here we show a newly developed dual-metal nanocluster catalyst, Fe2Co1/NC, that effectively converts nitrate and nitrite pollutants into NH3 through an electrochemical process. This catalyst achieves high NH3 production rates and Faradaic efficiency, surpassing single-metal Fe/NC and Co/NC catalysts, and remains stable over extended use. When incorporated into nitrate- or nitrite-based zinc batteries, the system enables simultaneous NH3 production and electricity generation, highlighting its potential for coupled energy recovery and environmental remediation. This work provides valuable design principles for bimetallic nanocluster catalysts and offers a promising strategy for the sustainable conversion of nitrogen-containing waste into useful chemicals.


  • Strategic Engineering of Axially Coordinated Ligands in Fe–N–C Catalysts for Enhanced Oxygen Reduction Electrocatalysis

    by Zongxuan Yang, Qingchen Wu, Hongwei Zhang, Cejun Hu, Xiaojun Bao, Pei Yuan

    The single‐atom Fe–N–C electrocatalyst is considered one of the most promising alternatives to the expensive and scarce Pt‐based catalysts for promoting oxygen reduction reaction in fuel cells. Regulating the coordination environment of the Fe center is a feasible strategy to improve its stability and catalytic activity. Recently, the introduction of axial ligands to Fe–N–C has attracted extensive research interest, providing a new dimension for coordination environment regulation compared with the common approaches of in‐plane doping or defect construction. This review focuses on discussing the contribution of axial ligand decoration to the activity and stability of the Fe–N–C catalyst, evaluating different types of axial ligands that have been introduced in the recent literature. Through summarizing the progress in decorating axial ligands to the Fe–N–C system, this review provides profound insights into the design and preparation of axially coordinated Fe–N–C catalysts.


  • Open Access

    Continuous-flow electrooxidation for scalable biomass upgrading over copper-supported CoFe Prussian blue analogues

    by Bowen Zhang, Tiantian Xiao, Cejun Hu, Zhichen Liu, Peng Chen, Zhengyu Zhao, Duanjing Lai, Jinming Huang, Hongwei Zhang, Xiaojun Bao, et al.

    Electrochemical biomass upgrading is a promising substitute for oxygen evolution reaction (OER) to generate valuable chemicals in conjunction with hydrogen generation. Pursuing highly efficient and durable electrocatalysts for significant concentration levels (≥ 50 mM) of biomass electrooxidation remains an enduring challenge. Herein, we introduce a robust Cu-supported CoFe Prussian blue analogue (CoFe PBA/CF) electrocatalyst, adept at facilitating high-concentration (50 mM) 5-hydroxymethylfurfural (HMF) oxidation into 2,5-furandicarboxylic acid (FDCA), achieving an exceptional HMF conversion (100%) with a notable FDCA yield of 98.4%. The influence of copper substrate and adsorption energy are therefore discussed. Impressively, the CoFe PBA/CF electrode sustains considerable durability in a continuous-flow electrochemical reactor designed for consecutive FDCA production, showcasing FDCA yields of 100/94% at flow rates of 0.4/0.8 mL·min-1 over 60 h’ uninterrupted electrolysis. This work provides a promising strategy to develop highly efficient and robust electrocatalysts for the consecutive production of high-value products coupled with green H2 production.