Laid Abdelali
Laid Abdelali has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Abed Zoulikha
Applied Materials Laboratory
2 shared publications Abdellah Bouguenna
Department of Electronics
1 shared publication- Abdellah Bouguenna
Electrical Engineering Laboratory of Oran, Department of Electronics, Faculty of Electrical Engineering, University of Sciences and Technology of Oran (USTO-MB), Oran, Algeria
1 shared publication - Aissa Meksi
Electrical Engineering Department University of Sciences and Technology of Oran B. P 1505 El Mnaouer Oran Algeria
1 shared publication Hamza Abid
Applied Material Laboratory University Djillali Liabes of Sidi Bel Abbes Algeria
1 shared publication- Ikram Zidani
Applied Materials Laboratory, Djilali Liabes University, Sidi Bel Abbes, Algeria
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by Sociedad Mexicana de Fisica A C in Revista Mexicana de Física
- Vol. 72 (5) , 1-8
Simulation study of laser diode based GaInP/AlGaInP structure
In this work, we investigate the energy levels and optimization of intrinsic parameters (such as number and width of wells, potential barrier width, refractive index, etc.) and extrinsic parameters (including temperature and pressure) in a laser diode based on the GaInP/AlGaInP structure. The computational techniques employed include the pseudo-empirical potential method to determine the electronic band structures and a graphical method for optimization. Our results are consistent with experimental and theoretical results.
- 1 September 2026
- Published by Sociedad Mexicana de Fisica A C in Revista Mexicana de Física
- Vol. 72 (5) , 1-8
Open AccessSimulation study of laser diode based GaInP/AlGaInP structure
In this work, we investigate the energy levels and optimization of intrinsic parameters (such as number and width of wells, potential barrier width, refractive index, etc.) and extrinsic parameters (including temperature and pressure) in a laser diode based on the GaInP/AlGaInP structure. The computational techniques employed include the pseudo-empirical potential method to determine the electronic band structures and a graphical method for optimization. Our results are consistent with experimental and theoretical results.
- Open Access
- 8 December 2025
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 4,p. 469-483
DFT-Based Study of TlX and BX (X= N, P, As) Compounds: A Comparative Insight into Structural, Electronic, and Optical Behavior
This work presents a detailed theoretical investigation of the structural, electronic, and optical properties of thallium-based (TlX) and boron-based (BX) compounds, where X = N, P, As, within the zinc-blende crystal structure. First-principles calculations were performed using density functional theory (DFT) within the generalized gradient approximation (GGA). The obtained results reveal that Tl-based compounds exhibit lower total energies compared to BX compounds, indicating higher structural stability. In terms of electronic behavior, BX compounds maintain their semiconducting nature. In contrast, TlX compounds show metallic or near-metallic characteristics due to the absence of an energy gap at the Fermi level. Furthermore, optical investigations demonstrate that TlX compounds possess higher static refractive indices and stronger absorption features in the low-energy region. These findings highlight the potential of Tl-based compounds for future applications in optoelectronic and photonic devices. Overall, this comparative study provides valuable insights for the design of advanced materials for electronic and energy-related technologies.
- 8 December 2025
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 4,p. 469-483
Open AccessDFT-Based Study of TlX and BX (X= N, P, As) Compounds: A Comparative Insight into Structural, Electronic, and Optical Behavior
This work presents a detailed theoretical investigation of the structural, electronic, and optical properties of thallium-based (TlX) and boron-based (BX) compounds, where X = N, P, As, within the zinc-blende crystal structure. First-principles calculations were performed using density functional theory (DFT) within the generalized gradient approximation (GGA). The obtained results reveal that Tl-based compounds exhibit lower total energies compared to BX compounds, indicating higher structural stability. In terms of electronic behavior, BX compounds maintain their semiconducting nature. In contrast, TlX compounds show metallic or near-metallic characteristics due to the absence of an energy gap at the Fermi level. Furthermore, optical investigations demonstrate that TlX compounds possess higher static refractive indices and stronger absorption features in the low-energy region. These findings highlight the potential of Tl-based compounds for future applications in optoelectronic and photonic devices. Overall, this comparative study provides valuable insights for the design of advanced materials for electronic and energy-related technologies.
- Open Access
- 8 December 2024
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 4,p. 427-432
Effects of ZnS Buffer Layer on Performance of CIGS Solar Cell
Cu(In,Ga)Se2 (CIGS)-based thin-film solar cells are currently among the most efficient. Zinc sulfide (ZnS) is the best buffer layer used in CIGS-based solar cells because it is non-toxic and has a wide band gap. In this study, we present a simulation of a CIGS solar cell with a ZnS buffer layer, carried out using the Silvaco-Atlas simulator. We attained an efficiency of 24.13%, short-circuit current of 37.81 mA/cm2, an open circuit voltage of 740 mV and a fill factor of 78.78% at a bandgap around 1.41 eV, corresponding to an x ratio of 0.5. The photovoltaic performance of the ZnS/CIGS solar cell is improved by optimizing the effects of layer parameters such as thickness, acceptor and donor densities of the CIGS absorber and ZnS buffer layers. For a 0.035 μm thick ZnS acceptor with a density of 6 × 1017 cm-3 and a 3 μm thick CIGS donor with a density of 1018 cm-3, a maximum efficiency improved to 27.22%.
- 8 December 2024
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 4,p. 427-432
Open AccessEffects of ZnS Buffer Layer on Performance of CIGS Solar Cell
Cu(In,Ga)Se2 (CIGS)-based thin-film solar cells are currently among the most efficient. Zinc sulfide (ZnS) is the best buffer layer used in CIGS-based solar cells because it is non-toxic and has a wide band gap. In this study, we present a simulation of a CIGS solar cell with a ZnS buffer layer, carried out using the Silvaco-Atlas simulator. We attained an efficiency of 24.13%, short-circuit current of 37.81 mA/cm2, an open circuit voltage of 740 mV and a fill factor of 78.78% at a bandgap around 1.41 eV, corresponding to an x ratio of 0.5. The photovoltaic performance of the ZnS/CIGS solar cell is improved by optimizing the effects of layer parameters such as thickness, acceptor and donor densities of the CIGS absorber and ZnS buffer layers. For a 0.035 μm thick ZnS acceptor with a density of 6 × 1017 cm-3 and a 3 μm thick CIGS donor with a density of 1018 cm-3, a maximum efficiency improved to 27.22%.